=================
All :abbr:`FD.io (Fast Data Input/Ouput)` :abbr:`CSIT (Continuous System
-Integration and Testing)` performance testing listed in this report are
-executed on physical testbeds built with bare-metal servers hosted by
-:abbr:`LF (Linux Foundation)` FD.io project. Two testbed topologies are
-used:
-
-- **3-Node Topology**: Consisting of two servers acting as SUTs
- (Systems Under Test) and one server as TG (Traffic Generator), all
- connected in ring topology. Used for executing all of the data plane
- tests including overlay tunnels and IPSec tests.
-- **2-Node Topology**: Consisting of one server acting as SUTs (Systems
- Under Test) and one server as TG (Traffic Generator), both connected
- in ring topology. Used for execution of tests without any overlay
- tunnel encapsulations. Added in CSIT rls18.07.
-
-Current FD.io production testbeds are built with servers based on two
-processor generations of Intel Xeons: Haswell-SP (E5-2699v3) and Skylake
-(Platinum 8180). Testbeds built with servers based on Arm processors are
-in the process of being added to FD.io production.
-
-Server SUT and DUT performance depends on server and processor type,
-hence results for testbeds based on different servers must be reported
+Integration and Testing)` performance test results included in this
+report are executed on the physical testbeds hosted by :abbr:`LF (Linux
+Foundation)` FD.io project, unless otherwise noted.
+
+Two physical server topology types are used:
+
+- **2-Node Topology**: Consists of one server acting as a System Under
+ Test (SUT) and one server acting as a Traffic Generator (TG), with
+ both servers connected into a ring topology. Used for executing tests
+ that require frame encapsulations supported by TG.
+
+- **3-Node Topology**: Consists of two servers acting as a Systems Under
+ Test (SUTs) and one server acting as a Traffic Generator (TG), with
+ all servers connected into a ring topology. Used for executing tests
+ that require frame encapsulations not supported by TG e.g. certain
+ overlay tunnel encapsulations and IPsec. Number of native Ethernet,
+ IPv4 and IPv6 encapsulation tests are also executed on these testbeds,
+ for comparison with 2-Node Topology.
+
+Current FD.io production testbeds are built with SUT servers based on
+the following processor architectures:
+
+- Intel Xeon: Skylake Platinum 8180 and Haswell-SP E5-2699v3.
+- Intel Atom: Denverton C3858.
+- ARM: TaiShan 2280, hip07-d05.
+
+Server SUT performance depends on server and processor type, hence
+results for testbeds based on different servers must be reported
separately, and compared if appropriate.
-Following sections describe existing production testbed types.
+Complete technical specifications of compute servers used in CSIT
+physical testbeds are maintained in FD.io CSIT repository:
+https://git.fd.io/csit/tree/docs/lab/testbed_specifications.md.
-3-Node Xeon Haswell (3n-hsw)
+Following is the description of existing production testbeds.
+
+2-Node Xeon Skylake (2n-skx)
----------------------------
-3n-hsw testbed is based on three Cisco UCS-c240m3 servers each equipped
-with two Intel Xeon Haswell-SP E5-2699v3 2.3 GHz 18 core processors.
-Physical testbed topology is depicted in a figure below.
+Four 2n-skx testbeds are in operation in FD.io labs. Each 2n-skx testbed
+is built with two SuperMicro SYS-7049GP-TRT servers, each in turn
+equipped with two Intel Xeon Skylake Platinum 8180 processors (38.5 MB
+Cache, 2.50 GHz, 28 cores). 2n-skx physical topology is shown below.
.. only:: latex
\begin{figure}[H]
\centering
\graphicspath{{../_tmp/src/introduction/}}
- \includegraphics[width=0.90\textwidth]{testbed-3n-hsw}
- \label{fig:testbed-3n-hsw}
+ \includegraphics[width=0.90\textwidth]{testbed-2n-skx}
+ \label{fig:testbed-2n-skx}
\end{figure}
.. only:: html
- .. figure:: testbed-3n-hsw.svg
- :alt: testbed-3n-hsw
+ .. figure:: testbed-2n-skx.svg
+ :alt: testbed-2n-skx
:align: center
-SUT1 and SUT2 servers are populated with the following NIC models:
+SUT servers are populated with the following NIC models:
-#. NIC-1: VIC 1385 2p40GE Cisco.
-#. NIC-2: NIC x520 2p10GE Intel.
-#. NIC-3: empty.
-#. NIC-4: NIC xl710-QDA2 2p40GE Intel.
-#. NIC-5: NIC x710-DA2 2p10GE Intel.
-#. NIC-6: QAT 8950 50G (Walnut Hill) Intel.
+#. NIC-1: x710-DA4 4p10GE Intel.
+#. NIC-2: xxv710-DA2 2p25GE Intel.
+#. NIC-3: mcx556a-edat ConnectX5 2p100GE Mellanox. (Not used yet.)
+#. NIC-4: empty, future expansion.
+#. NIC-5: empty, future expansion.
+#. NIC-6: empty, future expansion.
TG servers run T-Rex application and are populated with the following
NIC models:
-#. NIC-1: NIC xl710-QDA2 2p40GE Intel.
-#. NIC-2: NIC x710-DA2 2p10GE Intel.
-#. NIC-3: empty.
-#. NIC-4: NIC xl710-QDA2 2p40GE Intel.
-#. NIC-5: NIC x710-DA2 2p10GE Intel.
-#. NIC-6: NIC x710-DA2 2p10GE Intel. (For self-tests.)
-
-All Intel Xeon Haswell servers run with Intel Hyper-Threading disabled,
-making the number of logical cores exposed to Linux match the number of
-18 physical cores per processor socket.
-
-Complete 3n-hsw testbeds specification is available on
-`CSIT LF testbed <https://wiki.fd.io/view/CSIT/CSIT_LF_testbed>`_
-wiki page.
+#. NIC-1: x710-DA4 4p10GE Intel.
+#. NIC-2: xxv710-DA2 2p25GE Intel.
+#. NIC-3: mcx556a-edat ConnectX5 2p100GE Mellanox. (Not used yet.)
+#. NIC-4: empty, future expansion.
+#. NIC-5: empty, future expansion.
+#. NIC-6: x710-DA4 4p10GE Intel. (For self-tests.)
-Total of three 3n-hsw testbeds are in operation in FD.io labs.
+All Intel Xeon Skylake servers run with Intel Hyper-Threading enabled,
+doubling the number of logical cores exposed to Linux, with 56 logical
+cores and 28 physical cores per processor socket.
3-Node Xeon Skylake (3n-skx)
----------------------------
-3n-skx testbed is based on three SuperMicro SYS-7049GP-TRT servers each
-equipped with two Intel Xeon Skylake Platinum 8180 2.5 GHz 28 core
-processors. Physical testbed topology is depicted in a figure below.
+Two 3n-skx testbeds are in operation in FD.io labs. Each 3n-skx testbed
+is built with three SuperMicro SYS-7049GP-TRT servers, each in turn
+equipped with two Intel Xeon Skylake Platinum 8180 processors (38.5 MB
+Cache, 2.50 GHz, 28 cores). 3n-skx physical topology is shown below.
.. only:: latex
doubling the number of logical cores exposed to Linux, with 56 logical
cores and 28 physical cores per processor socket.
-Complete 3n-skx testbeds specification is available on
-`CSIT LF lab extension <https://wiki.fd.io/view/CSIT/fdio_csit_lab_ext_lld_draft>`_
-wiki page.
+3-Node Xeon Haswell (3n-hsw)
+----------------------------
-Total of two 3n-skx testbeds are in operation in FD.io labs.
+Three 3n-hsw testbeds are in operation in FD.io labs. Each 3n-hsw
+testbed is built with three Cisco UCS-c240m3 servers, each in turn
+equipped with two Intel Xeon Haswell-SP E5-2699v3 processors (45 MB
+Cache, 2.3 GHz, 18 cores). 3n-hsw physical topology is shown below.
-2-Node Xeon Skylake (2n-skx)
-----------------------------
+.. only:: latex
+
+ .. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_tmp/src/introduction/}}
+ \includegraphics[width=0.90\textwidth]{testbed-3n-hsw}
+ \label{fig:testbed-3n-hsw}
+ \end{figure}
+
+.. only:: html
+
+ .. figure:: testbed-3n-hsw.svg
+ :alt: testbed-3n-hsw
+ :align: center
+
+SUT1 and SUT2 servers are populated with the following NIC models:
+
+#. NIC-1: VIC 1385 2p40GE Cisco.
+#. NIC-2: NIC x520 2p10GE Intel.
+#. NIC-3: empty.
+#. NIC-4: NIC xl710-QDA2 2p40GE Intel.
+#. NIC-5: NIC x710-DA2 2p10GE Intel.
+#. NIC-6: QAT 8950 50G (Walnut Hill) Intel.
+
+TG servers run T-Rex application and are populated with the following
+NIC models:
-2n-skx testbed is based on two SuperMicro SYS-7049GP-TRT servers each
-equipped with two Intel Xeon Skylake Platinum 8180 2.5 GHz 28 core
-processors. Physical testbed topology is depicted in a figure below.
+#. NIC-1: NIC xl710-QDA2 2p40GE Intel.
+#. NIC-2: NIC x710-DA2 2p10GE Intel.
+#. NIC-3: empty.
+#. NIC-4: NIC xl710-QDA2 2p40GE Intel.
+#. NIC-5: NIC x710-DA2 2p10GE Intel.
+#. NIC-6: NIC x710-DA2 2p10GE Intel. (For self-tests.)
+
+All Intel Xeon Haswell servers run with Intel Hyper-Threading disabled,
+making the number of logical cores exposed to Linux match the number of
+18 physical cores per processor socket.
+
+2-Node Atom Denverton (2n-dnv)
+------------------------------
+
+2n-dnv testbed is built with: i) one Intel S2600WFT server acting as TG
+and equipped with two Intel Xeon Skylake Platinum 8180 processors (38.5
+MB Cache, 2.50 GHz, 28 cores), and ii) one SuperMicro SYS-E300-9A server
+acting as SUT and equipped with one Intel Atom C3858 processor (12 MB
+Cache, 2.00 GHz, 12 cores). 2n-dnv physical topology is shown below.
.. only:: latex
\begin{figure}[H]
\centering
\graphicspath{{../_tmp/src/introduction/}}
- \includegraphics[width=0.90\textwidth]{testbed-2n-skx}
- \label{fig:testbed-2n-skx}
+ \includegraphics[width=0.90\textwidth]{testbed-2n-dnv}
+ \label{fig:testbed-2n-dnv}
\end{figure}
.. only:: html
- .. figure:: testbed-2n-skx.svg
- :alt: testbed-2n-skx
+ .. figure:: testbed-2n-dnv.svg
+ :alt: testbed-2n-dnv
:align: center
-SUT servers are populated with the following NIC models:
+SUT server have four internal 10G NIC port:
-#. NIC-1: x710-DA4 4p10GE Intel.
-#. NIC-2: xxv710-DA2 2p25GE Intel.
-#. NIC-3: mcx556a-edat ConnectX5 2p100GE Mellanox. (Not used yet.)
-#. NIC-4: empty, future expansion.
-#. NIC-5: empty, future expansion.
-#. NIC-6: empty, future expansion.
+#. P-1: x553 copper port.
+#. P-2: x553 copper port.
+#. P-3: x553 fiber port.
+#. P-4: x553 fiber port.
+
+TG server run T-Rex software traffic generator and are populated with the
+following NIC models:
+
+#. NIC-1: x550-T2 2p10GE Intel.
+#. NIC-2: x550-T2 2p10GE Intel.
+#. NIC-3: x520-DA2 2p10GE Intel.
+#. NIC-4: x520-DA2 2p10GE Intel.
+
+The 2n-dnv testbed is in operation in Intel SH labs.
+
+3-Node Atom Denverton (3n-dnv)
+------------------------------
+
+One 3n-dnv testbed is built with: i) one SuperMicro SYS-7049GP-TRT
+server acting as TG and equipped with two Intel Xeon Skylake Platinum
+8180 processors (38.5 MB Cache, 2.50 GHz, 28 cores), and ii) one
+SuperMicro SYS-E300-9A server acting as SUT and equipped with one Intel
+Atom C3858 processor (12 MB Cache, 2.00 GHz, 12 cores). 3n-dnv physical
+topology is shown below.
+
+.. only:: latex
+
+ .. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_tmp/src/introduction/}}
+ \includegraphics[width=0.90\textwidth]{testbed-3n-dnv}
+ \label{fig:testbed-3n-dnv}
+ \end{figure}
+
+.. only:: html
+
+ .. figure:: testbed-3n-dnv.svg
+ :alt: testbed-3n-dnv
+ :align: center
+
+SUT1 and SUT2 servers are populated with the following NIC models:
+
+#. NIC-1: x553 2p10GE fiber Intel.
+#. NIC-2: x553 2p10GE copper Intel.
TG servers run T-Rex application and are populated with the following
NIC models:
#. NIC-1: x710-DA4 4p10GE Intel.
-#. NIC-2: xxv710-DA2 2p25GE Intel.
-#. NIC-3: mcx556a-edat ConnectX5 2p100GE Mellanox. (Not used yet.)
-#. NIC-4: empty, future expansion.
-#. NIC-5: empty, future expansion.
-#. NIC-6: x710-DA4 4p10GE Intel. (For self-tests.)
-All Intel Xeon Skylake servers run with Intel Hyper-Threading enabled,
-doubling the number of logical cores exposed to Linux, with 56 logical
-cores and 28 physical cores per processor socket.
+3-Node ARM TaiShan (3n-tsh)
+---------------------------
+
+One 3n-tsh testbed is built with: i) one SuperMicro SYS-7049GP-TRT
+server acting as TG and equipped with two Intel Xeon Skylake Platinum
+8180 processors (38.5 MB Cache, 2.50 GHz, 28 cores), and ii) one Huawei
+TaiShan 2280 server acting as SUT and equipped with one hip07-d05
+processor (64* ARM Cortex-A72). 3n-tsh physical topology is shown below.
-Complete 2n-skx testbed specification is available on
-`CSIT/Testbeds: Xeon Skx, Arm, Atom
-<https://wiki.fd.io/view/CSIT/Testbeds:_Xeon_Skx,_Arm,_Atom.>`_ wiki page.
+.. only:: latex
-Total of four 2n-skx testbeds are in operation in FD.io labs.
+ .. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_tmp/src/introduction/}}
+ \includegraphics[width=0.90\textwidth]{testbed-3n-tsh}
+ \label{fig:testbed-3n-tsh}
+ \end{figure}
+
+.. only:: html
+
+ .. figure:: testbed-3n-tsh.svg
+ :alt: testbed-3n-tsh
+ :align: center
+
+SUT1 and SUT2 servers are populated with the following NIC models:
+
+#. NIC-1: connectx4 2p25GE Mellanox.
+#. NIC-2: x520 2p10GE Intel.
+
+TG servers run T-Rex application and are populated with the following
+NIC models:
+
+#. NIC-1: x710-DA4 4p10GE Intel.
+#. NIC-2: xxv710-DA2 2p25GE Intel.