-CSIT Release Notes\r
-==================\r
-\r
-Changes in CSIT |release|\r
--------------------------\r
-\r
-#. Test environment changes in VPP data plane performance tests:\r
-\r
- - Further characterization and optimizations of VPP vhost-user and VM test\r
- methodology and test environment;\r
-\r
- - Tests with varying Qemu virtio queue (a.k.a. vring) sizes:\r
- [vr256] default 256 descriptors, [vr1024] 1024 descriptors to\r
- optimize for packet throughput;\r
-\r
- - Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)`\r
- settings: [cfs] default settings, [cfsrr1] :abbr:`CFS (Completely Fair\r
- Scheduler)` RoundRobin(1) policy applied to all data plane threads\r
- handling test packet path including all VPP worker threads and all Qemu\r
- testpmd poll-mode threads;\r
-\r
- - Resulting test cases are all combinations with [vr256,vr1024] and\r
- [cfs,cfsrr1] settings;\r
-\r
- - For more detail see performance results observations section in\r
- this report;\r
-\r
-#. Code updates and optimizations in CSIT performance framework:\r
-\r
- - Complete CSIT framework code revision and optimizations as descried\r
- on CSIT wiki page `Design_Optimizations\r
- <https://wiki.fd.io/view/CSIT/Design_Optimizations>`_.\r
-\r
- - For more detail see the :ref:`CSIT Framework Design <csit-design>` section\r
- in this report;\r
-\r
-#. Changes to CSIT driver for TRex Traffic Generator:\r
-\r
- - Complete refactor of TRex CSIT driver;\r
-\r
- - Introduction of packet traffic profiles to improve usability and\r
- manageability of traffic profiles for a growing number of test\r
- scenarios.\r
-\r
- - Support for packet traffic profiles to test IPv4/IPv6 stateful and\r
- stateless DUT data plane features;\r
-\r
-#. Added VPP performance tests\r
-\r
- - **Linux Container VPP memif virtual interface tests**\r
-\r
- - VPP Memif virtual interface (shared memory interface) tests\r
- interconnecting VPP instances over memif. VPP vswitch\r
- instance runs in bare-metal user-mode handling Intel x520 NIC\r
- 10GbE interfaces and connecting over memif (Master side) virtual\r
- interfaces to another instance of VPP running in bare-metal Linux\r
- Container (LXC) with memif virtual interfaces (Slave side). LXC\r
- runs in a priviliged mode with VPP data plane worker threads\r
- pinned to dedicated physical CPU cores per usual CSIT practice.\r
- Both VPP run the same version of software. This test topology is\r
- equivalent to existing tests with vhost-user and VMs.\r
-\r
- - **Stateful Security Groups**\r
-\r
- - New tests of VPP stateful security-groups a.k.a. acl-plugin\r
- functionally compatible with networking-vpp OpenStack;\r
-\r
- - New tested security-groups access-control-lists (acl)\r
- configuration variants include: [iaclNsl] input acl stateless,\r
- [oaclNsl] output acl stateless, [iaclNsf] input acl stateful\r
- a.k.a. reflect, [oaclNsf] output acl stateful a.k.a. reflect,\r
- where N is number of access-control-entries (ace) in the acl.\r
-\r
- - Testing packet flows transmitted by TG: 100, 10k, 100k, always\r
- hitting the last permit entry in acl.\r
-\r
- - **VPP vhost and VM tests**\r
-\r
- - New VPP vhost-user and VM test cases to benchmark performance of\r
- VPP and VM topologies with Qemu and CFS policy combinations of\r
- [vr256,vr1024] x [cfs,cfsrr1];\r
-\r
- - Statistical analysis of repeatibility of results;\r
-\r
-Performance Improvements\r
-------------------------\r
-\r
-Substantial improvements in measured packet throughput have been observed in a\r
-number of CSIT |release| tests listed below, with relative increase of\r
-double-digit percentage points. Relative improvements for this release are\r
-calculated against the test results listed in CSIT |release-1| report. The\r
-comparison is calculated between the mean values based on collected and\r
-archived test results' samples for involved VPP releases. Standard deviation\r
-has been also listed for CSIT |release|. VPP-16.09 and VPP-17.01 numbers are\r
-provided for reference.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. csv-table::\r
- :align: center\r
- :header: VPP Functionality,Test Name,VPP-16.09 [Mpps],VPP-17.01 [Mpps],VPP-17.04 mean [Mpps],VPP-17.07 mean [Mpps],VPP-17.07 stdev [Mpps],17.04 to 17.07 change\r
- :file: ../../../docs/report/vpp_performance_tests/performance_improvements/ndr_throughput.csv\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. csv-table::\r
- :align: center\r
- :header: VPP Functionality,Test Name,VPP-16.09 [Mpps],VPP-17.01 [Mpps],VPP-17.04 mean [Mpps],VPP-17.07 mean [Mpps],VPP-17.07 stdev [Mpps],17.04 to 17.07 change\r
- :file: ../../../docs/report/vpp_performance_tests/performance_improvements/pdr_throughput.csv\r
-\r
-Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-17.07 release notes\r
-<https://docs.fd.io/vpp/17.07/release_notes_1707.html>`_.\r
-\r
-Other Performance Changes\r
--------------------------\r
-\r
-Other changes in measured packet throughput, with either minor relative increase\r
-or decrease, have been observed in a number of CSIT |release| tests listed\r
-below. Relative changes are calculated against the test results listed in CSIT\r
-|release-1| report.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. csv-table::\r
- :align: center\r
- :header: VPP Functionality,Test Name,VPP-16.09 [Mpps],VPP-17.01 [Mpps],VPP-17.04 mean [Mpps],VPP-17.07 mean [Mpps],VPP-17.07 stdev [Mpps],17.04 to 17.07 change\r
- :file: ../../../docs/report/vpp_performance_tests/performance_improvements/ndr_throughput_others.csv\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. csv-table::\r
- :align: center\r
- :header: VPP Functionality,Test Name,VPP-16.09 [Mpps],VPP-17.01 [Mpps],VPP-17.04 mean [Mpps],VPP-17.07 mean [Mpps],VPP-17.07 stdev [Mpps],17.04 to 17.07 change\r
- :file: ../../../docs/report/vpp_performance_tests/performance_improvements/pdr_throughput_others.csv\r
-\r
-\r
-Known Issues\r
-------------\r
-\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
-\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| # | Issue | Jira ID | Description |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Security-groups acl-plugin scale tests failure | CSIT-731 | VPP with 2 worker threads crashes during security-groups |\r
-| | with stateful acls if VPP with 2 worker threads | VPP-912 | iaclNsf and oaclNsf tests with 100k flows. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | VPP fails memif tests in 4 worker 2 core setup | CSIT-732 | VPP with 4 worker threads running on 2 physical cores crashes |\r
-| | | VPP-920 | during memif tests. Initial debugging points to DPDK code |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | NDR discovery test failures 1518B frame size | VPP-663 | VPP reporting errors: dpdk-input Rx ip checksum errors. |\r
-| | for ip4scale200k, ip4scale2m scale IPv4 routed- | | Observed frequency: all test runs. |\r
-| | forwarding tests. ip4scale20k tests are fine. | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. |\r
-| | | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 5 | Sporadic NDR discovery test failures on x520. | CSIT-750 | Suspected issue with HW settings (BIOS, FW) in LF |\r
-| | | | infrastructure. Issue can't be replicated outside LF. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 6 | VPP in 2t2c setups - large variation | CSIT-568 | Suspected NIC firmware or DPDK driver issue affecting NDR |\r
-| | of discovered NDR throughput values across | | throughput. Applies to XL710 and X710 NICs, x520 NICs are fine. |\r
-| | multiple test runs with xl710 and x710 NICs. | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 7 | Lower than expected NDR and PDR throughput with | CSIT-569 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
-| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-\r
+Release Notes
+=============
+
+Changes in |csit-release|
+-------------------------
+
+#. VPP PERFORMANCE TESTS
+
+ - **Service density 2n-skx tests**: Added higher NF density tests with
+ 802.1q (vlan) and VXLAN encapsulation from Traffic Generator.
+
+ - **GBP tests**: Added GBP (Group Based Policy) routing test cases
+ with 802.1q (vlan) external traffic.
+
+ - **AVF IPv4 scale tests**: Increased coverage of AVF IPv4 base and
+ scale test cases (Fortville NICs only).
+
+ - **2n-skx tests**: Increased coverage of selected (COP, iACL,
+ Policer) test cases.
+
+ - **IPsec scale tests**: Added IPsec interface mode scale tests with
+ 1, 40, 400, 1000, 5000, 10000, 20000, 40000, 60000 IPsec tunnels.
+ Removed DPDK backend dependency. Major IPsec test code
+ refactoring.
+
+ - **Hoststack TCP/IP tests**: Major refactor of Hoststack TCP
+ performance tests using WRK generator talking to the VPP HTTP
+ static server plugin measuring connections per second and
+ requests per second.
+
+ - **Changed methodology of dot1q tests in 2-Node testbeds**: dot1q
+ encapsulation is now used on both links of SUT. Previously dot1q
+ was used only on a single link with the other link carrying
+ untagged Ethernet frames. This change results in slightly lower
+ throughput in CSIT-1908 for all dot1q tests in all 2-Node
+ testbeds.
+
+ - **KVM VM vhost-user tests**: completed move to Kernel-VM for all
+ tests. In addition to running DPDK Testpmd as VM workload, new
+ tests created with VPP as VM workload. VPP in VM is the same
+ version as the DUT VPP (acting as vSwitch) and its configuration
+ depends on the test type. For all L2 Ethernet Switching tests
+ it's vpp-l2xc (L2 cross-connect), for all IPv4 Routing tests it's
+ vpp-ip4 (VPP IPv4 routing).
+
+#. TEST FRAMEWORK
+
+ - **CSIT PAPI Support**: Finished conversion of CSIT VAT L1 keywords
+ to PAPI L1 KWs in CSIT using VPP Python bindings (VPP PAPI).
+ Redesign of key components of PAPI Socket Executor and PAPI
+ history. Due to issues with PAPI performance, VAT is still used
+ in CSIT for all VPP scale tests. See known issues below.
+
+ - **General Code Housekeeping**: Ongoing RF keywords optimizations,
+ removal of redundant RF keywords and aligning of suite/test
+ setup/teardowns.
+
+
+#. PRESENTATION AND ANALYTICS LAYER
+
+ - **Graphs Layout Improvements**: Improved performance graphs layout
+ for better readibility and maintenance: test grouping, axis
+ labels, descriptions, other informative decoration.
+
+.. raw:: latex
+
+ \clearpage
+
+.. _vpp_known_issues:
+
+Known Issues
+------------
+
+List of known issues in |csit-release| for VPP performance tests:
+
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| # | JiraID | Issue Description |
++====+=========================================+==========================================================================================================+
+| 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. |
+| | <https://jira.fd.io/browse/CSIT-570>`_ | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds. |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. |
+| | <https://jira.fd.io/browse/VPP-662>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 3 | `CSIT-1503 | [`TRex-519 <https://trex-tgn.cisco.com/youtrack/issue/trex-519>`_] XL710/XXV710 with FW 6.0.1 will have |
+| | <https://jira.fd.io/browse/CSIT-1503>`_ | Rx drop rate of 27MPPS. |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 4 | `CSIT-1498 | Memif tests are sporadically failing on initialization of memif connection. |
+| | <https://jira.fd.io/browse/CSIT-1498>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 5 | `CSIT-1499 | AVF tests are sporadically failing on initialization of AVF interface. |
+| | <https://jira.fd.io/browse/CSIT-1499>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 6 | `VPP-1676 | 9000B ip4 memif errors - ip4-input: ip4 length > l2 length. |
+| | <https://jira.fd.io/browse/VPP-1676>`_ | IP4 jumbo frames (9000B) are dropped in case of tests with memif. |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 7 | `VPP-1677 | 9000B ip4 nat44: VPP crash + coredump. |
+| | <https://jira.fd.io/browse/VPP-1677>`_ | VPP crashes very often in case that NAT44 is configured and it has to process IP4 jumbo frames (9000B). |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 8 | `CSIT-1591 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
+| | <https://jira.fd.io/browse/CSIT-1499>`_ | longer to program VPP). This needs to be addressed on the PAPI side. |
+| +-----------------------------------------+ |
+| | `VPP-1763 | |
+| | <https://jira.fd.io/browse/VPP-1763>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 9 | `CSIT-1592 | VPP memif API does not enable memif zero-copy, resulting in different memif configuration vs. previously |
+| | <https://jira.fd.io/browse/CSIT-1592>`_ | tested VAT/CLI where memif zero-copy was enabled by default. Needs to be fixed in VPP. |
+| +-----------------------------------------+ |
+| | `VPP-1764 | |
+| | <https://jira.fd.io/browse/VPP-1764>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 10 | `VPP-1675 | IPv4 IPSEC 9000B packet tests are failing as no packet is forwarded. |
+| | <https://jira.fd.io/browse/VPP-1675>`_ | Reason: chained buffers are not supported. |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 11 | `CSIT-1593 | IPv4 AVF 9000B packet tests are failing on 3n-skx while passing on 2n-skx. |
+| | <https://jira.fd.io/browse/CSIT-1593>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+