Changes in CSIT |release|\r
-------------------------\r
\r
-#. Added VPP performance tests\r
+#. **VPP performance tests**\r
\r
- - **Container Service Chain Topologies Orchestrated by K8s with VPP Memif**\r
+ - *MRR tests* - New Maximum Receive Rate tests measure the packet\r
+ forwarding rate under the maximum load offered by traffic\r
+ generator over a set trial duration, regardless of packet loss.\r
+ MRR tests are used for continuous performance trending and for\r
+ comparison between releases.\r
\r
- - Added tests with VPP vswitch in container connecting a number of VPP-\r
- in-container service chain topologies with L2 Cross-Connect and L2\r
- Bridge-Domain configurations, orchestrated by Kubernetes. Added\r
- following forwarding topologies: i) "Parallel" with packets flowing from\r
- NIC via VPP to container and back to VPP and NIC; ii) "Chained" (a.k.a.\r
- "Snake") with packets flowing via VPP to container, back to VPP, to next\r
- container, back to VPP and so on until the last container in a chain,\r
- then back to VPP and NIC; iii) "Horizontal" with packets flowing via VPP\r
- to container, then via "horizontal" memif to next container, and so on\r
- until the last container, then back to VPP and NIC;\r
+ - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy\r
+ tests measure performance of SRv6 Endpoint fronting SR-unaware\r
+ appliance via masquerading (End.AM), dynamic proxy (End.AD) or\r
+ static proxy (End.AS) SR functions.\r
\r
- - **MRR tests**\r
+#. **Presentation and Analytics Layer**\r
\r
- - <placeholder>;\r
+ - *Performance trending* - Added continuous performance trending and\r
+ analysis. New Performance Trending and Performance Analysis jobs\r
+ executed regular throughput tests, with results being subsequently\r
+ analysed and trend and anomalies summarized and presented in VPP\r
+ Performance Dashboard and trendline graphs.\r
\r
- - **SRv6**\r
+#. **Test Framework Optimizations**\r
\r
- - Initial SRv6 (Segment Routing IPv6) tests verifying performance of\r
- IPv6 and SRH (Segment Routing Header) encapsulation, decapsulation,\r
- lookups and rewrites based on configured End and End.DX6 SRv6 egress\r
- functions;\r
+ - *Performance tests efficiency* - Qemu build/install optimizations,\r
+ warmup phase handling, vpp restart handling. Resulted in improved\r
+ stability and reduced total execution time by 30% for single pkt\r
+ size e.g. 64B/78B.\r
\r
-#. Presentation and Analytics Layer\r
-\r
- - Added throughput speedup analysis for multi-core and multi-thread\r
- VPP tests into Presentation and Analytics Layer (PAL) for automated\r
- CSIT test results analysis;\r
-\r
-#. Other changes\r
-\r
- - **Framework optimizations**\r
-\r
- - Performance test duration improvements and stability;\r
+ - *General code housekeeping* - ongoing RF keywords optimizations,\r
+ removal of redundant RF keywords.\r
\r
Performance Changes\r
-------------------\r
fully representative for these tests. The root causes behind poor\r
results repeatibility vary between the test cases.\r
\r
-NDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
+NDR Changes\r
+~~~~~~~~~~~\r
\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
+NDR small packet throughput changes between releases are available in a\r
+CSV and pretty ASCII formats:\r
\r
- `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,\r
- `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,\r
- `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,\r
- `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.\r
\r
-PDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
+.. note::\r
+\r
+ Test results have been generated by\r
+ `FD.io test executor vpp performance jobs`_ with Robot Framework result\r
+ files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.\r
\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
+PDR Changes\r
+~~~~~~~~~~~\r
+\r
+NDR small packet throughput changes between releases are available in a\r
+CSV and pretty ASCII formats:\r
\r
- `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,\r
- `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,\r
- `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,\r
- `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.\r
\r
-Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-18.01 release notes\r
-<https://docs.fd.io/vpp/18.01/release_notes_1801.html>`_.\r
+.. note::\r
+\r
+ Test results have been generated by\r
+ `FD.io test executor vpp performance jobs`_ with Robot Framework result\r
+ files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.\r
\r
-MRR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
+MRR Changes\r
+~~~~~~~~~~~\r
\r
-MRR changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
+MRR small packet throughput changes between releases are available in a\r
+CSV and pretty ASCII formats:\r
\r
- `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,\r
- `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,\r
- `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,\r
- `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.\r
\r
+.. note::\r
+\r
+ Test results have been generated by\r
+ `FD.io test executor vpp mrr jobs <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-mrr-daily-master/>`_\r
+ with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz\r
+ `archived here <https://docs.fd.io/csit/master/trending/_static/archive/>`_.\r
+\r
+Throughput Trending\r
+-------------------\r
+\r
+In addition to reporting throughput changes between VPP releases, CSIT\r
+provides continuous performance trending for VPP master branch:\r
+\r
+#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_\r
+ - per VPP test case throughput trend, trend compliance and summary of\r
+ detected anomalies.\r
+\r
+#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_\r
+ - throughput test metrics, trend calculations and anomaly\r
+ classification (progression, regression, outlier).\r
+\r
+#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_\r
+ - per VPP build MRR throughput measurements against the trendline\r
+ with anomaly highlights, with associated CSIT test jobs.\r
+\r
Known Issues\r
------------\r
\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
+List of known issues in CSIT |release| for VPP performance tests:\r
\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
| # | Issue | Jira ID | Description |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. |\r
-| | | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |\r
++===+=================================================+============+=================================================================+\r
+| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |\r
| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |\r
| | | | outside of LF testbeds. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | Lower than expected NDR throughput with | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
-| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. |\r
+| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
+| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. |\r
+| | xl710 and x710 NICs, compared to x520 NICs. | | |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | rls1801 plugin related performance regression | CSIT-925 | With all plugins loaded NDR, PDR and MaxRates vary |\r
-| | | | intermittently from 3% to 5% across multiple test executions. |\r
-| | | | Requires plugin code bisecting. |\r
+| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |\r
+| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd |\r
+| | | | performance tests. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 5 | rls1801 generic small performance regression | CSIT-926 | Generic performance regression of discovered NDR, PDR and |\r
-| | ip4base, l2xcbase, l2bdbase | | MaxRates of -3%..-1% vs. rls1710, affects ip4base, l2xcbase, |\r
-| | | | l2bdbase test suites. Not detected by CSIT performance trending |\r
-| | | | scheme as it was masked out by another issue CSIT-925. |\r
+| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR |\r
+| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 6 | rls1801 substantial NDR/PDR regression for | CSIT-928 | NDR regression of -7%..-15%, PDR regression of -3%..-15% |\r
-| | IPSec tunnel scale with HW QAT crypto-dev | | compared to rls1710. |\r
+| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data |\r
+| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected |\r
+| | | | issue with Ligato vpp-agent. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r