#. VPP PERFORMANCE TESTS
- - **Intel Xeon 2n-skx, 3n-skx testbeds**: VPP performance test data
- is not included in this report version. This is due to the lower
- performance and behaviour inconsistency of these systems
- following the upgrade of processor microcode packages (skx ucode
- 0x2000064), done as part of updating Ubuntu 18.04 LTS kernel
- version. Tested VPP and DPDK applications (L3fwd) are affected.
- Skx test data will be added in subsequent maintenance report
- version(s) once the issue is resolved. See
+ - CSIT test environment is versioned, see
+ :ref:`test_environment_versioning`.
+
+ - To identify performance changes due to VPP code changes from
+ v20.05.0 to v20.09.0, both have been tested in CSIT environment
+ ver. 5 and compared against each other. All substantial
+ progressions has been marked up with RCA analysis. See
+ :ref:`vpp_compare_current_vs_previous_release` and
:ref:`vpp_known_issues`.
- - **Intel Xeon 2n-clx testbeds**: VPP performance test data is now
- included in this report, after resolving the issue of lower
- performance and behaviour inconsistency of these systems due to
- the Linux kernel driven upgrade of processor microcode packages
- to 0x500002c. The resolution is to use latest SuperMicro BIOS 3.2
- (for X11DPG-QT motherboards used) that upgrades processor
- microcode to 0x500002c, AND NOT kernel provided ucode package as
- it does put system into sub-optimal state. Subset of 2n-clx VPP
- tests are failing due to clx system behaviour change: i) all ip4
- tests with xxv710 and avf driver and ii) some cx556a rdma tests.
- See :ref:`vpp_known_issues`.
-
- - **Service density 2n-skx tests**: Added new NF density tests with
- IPsec encryption between DUTs.
-
- - **AVF tests**: Full test coveraged based on code changes in CSIT
- core layer (driver/interface awareness) and generated by suite
- generator (Intel Fortville NICs only).
-
- - **Hoststack tests**: Major refactor of VPP Hoststack TCP/IP
- performance tests using WRK generator talking to the VPP HTTP
- static server plugin measuring connections per second and
- requests per second. Added new iperf3 with LDPreload tests,
- iperf3/LDPreload tests with packet loss induced via the VPP NSIM
- (Network Simulator) plugin, and QUIC/UDP/IP transport tests.
- All of the new tests measure goodput through the VPP Hoststack
- from client to server.
-
- - **Latency HDRHistogram**: Added High Dynamic Range Histogram
- latency measurements based on the new capability in TRex traffic
- generator. HDRH latency data presented in latency packet
- percentile graphs and in detailed results tables.
-
- - **Mellanox CX556A-EDAT tests**: Added tests with Mellanox
- ConnectX5-2p100GE NICs in 2n-clx testbeds using VPP native rdma
- driver.
-
- - **IPsec reconfiguration tests**: Added tests measuring the impact
- of IPsec tunnels creations and removals.
-
- - **Load Balancer tests**: Added VPP performance tests for Maglev,
- L3DSR (Direct Server Return), Layer 4 Load Balancing NAT Mode.
+ - **NAT44 tests**: Adapted existing and added new tests.
-#. TEST FRAMEWORK
+ - Refactored NAT44 deterministic mode (nat44det) tests to use separate
+ det44 vpp plugin and to use the same scheme of inside and outside
+ addresses and ports, as used in new NAT44 endpoint-dependent mode tests.
+
+ - Added new NAT44 endpoint-depended mode uni-directional (nat44ed-udir)
+ tests that measure packet throughput in one direction with usage of TRex
+ in stateless mode.
- - **CSIT Python3 support**: Full migration of CSIT from Python2.7 to
- Python3.6. This change includes library migration, PIP dependency
- upgrade, CSIT container images, infrastructure packages
- ugrade/installation.
+ - Added new NAT44 endpoint-dependent mode CPS tests that measure
+ connections per second with usage of TRex in stateful mode.
+ NOTE: CPS measurement data will be added in two weeks.
- - **CSIT PAPI support**: Finished conversion of CSIT VAT L1 keywords
- to PAPI L1 KWs in CSIT using VPP Python bindings (VPP PAPI).
- Redesign of key components of PAPI Socket Executor and PAPI
- history. Due to issues with PAPI performance, VAT is still used
- in CSIT for all VPP scale tests. See known issues below.
+ - **IPSec async mode tests**: Added VPP performance tests for async crypto
+ engine.
- - **Test Suite Generator**: Added capability to generate suites for
- different drivers per NIC model including DPDK, AVF, RDMA.
- Extended coverage for all tests.
+ - **AMD 2n-zn2 testbed**: New physical testbed type installed in FD.io CSIT,
+ VPP performance data will be added in upcoming weeks.
+
+#. TEST FRAMEWORK
+
+ - **TRex ASTF**: Added capability to run TRex in advanced stateful mode.
+
+ - **CSIT PAPI support**: Due to issues with PAPI performance, VAT is
+ still used in CSIT for all VPP scale tests. See known issues below.
- **General Code Housekeeping**: Ongoing RF keywords optimizations,
removal of redundant RF keywords and aligning of suite/test
setup/teardowns.
-#. TEST ENVIRONMENT
-
- - **TRex Fortville NIC Performance**: Received FVL fix from Intel
- resolving TRex low throughput issue. TRex per FVL NIC throughput
- increased from ~27 Mpps to the nominal ~37 Mpps. For detail see
- `CSIT-1503 <https://jira.fd.io/browse/CSIT-1503>`_ and `TRex-519
- <https://trex-tgn.cisco.com/youtrack/issue/trex-519>`_].
-
- - **New Intel Xeon Cascadelake Testbeds**: Added performance tests
- for 2-Node-Cascadelake (2n-clx) testbeds with x710, xxv710 and
- cx556a-edat NIC cards.
+ - **Intel E810CQ 100G NIC**: Added configuration for Intel E810CQ 100G NIC.
+ No tests run for this NIC as it is not present in FD.io CSIT lab yet.
#. PRESENTATION AND ANALYTICS LAYER
- - **Graphs layout improvements**: Improved performance graphs layout
- for better readibility and maintenance: test grouping, axis
- labels, descriptions, other informative decoration.
-
- - **Latency graphs**: Min/Avg/Max group bar latency graphs are
- replaced with packet latency percentile distributon at different
- background packet loads based on TRex latency hdrhistogram
- measurements.
-
-..
- // Alternative Note for 1st Bullet when bad microcode Skx, Clx results are published
- - **Intel Xeon 2n-skx, 3n-skx and 2n-clx testbeds**: VPP performance
- test data is included in this report version, but it shows lower
- performance and behaviour inconsistency of these systems
- following the upgrade of processor microcode packages (skx ucode
- 0x2000064, clx ucode 0x500002c) as part of updating Ubuntu 18.04
- LTS kernel version. Tested VPP and DPDK applications (L3fwd) are
- affected. Skx and Clx test data will be corrected in subsequent
- maintenance report version(s) once the issue is resolved. See
- :ref:`vpp_known_issues`.
+ - **Graphs improvements**: Added possibility to use Gbps on Y-axis in
+ Packet Throughput and Speedup Multi-Core graphs, added unidirectional
+ mode to the Latency graphs.
.. raw:: latex
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
| # | JiraID | Issue Description |
+====+=========================================+===========================================================================================================+
-| 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. |
+| 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. |
| | <https://jira.fd.io/browse/CSIT-570>`_ | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds. |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. |
+| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. |
| | <https://jira.fd.io/browse/VPP-662>`_ | |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 3 | `CSIT-1498 | Memif tests are sporadically failing on initialization of memif connection. |
-| | <https://jira.fd.io/browse/CSIT-1498>`_ | |
-+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 4 | `VPP-1677 | 9000B ip4 nat44: VPP crash + coredump. |
-| | <https://jira.fd.io/browse/VPP-1677>`_ | VPP crashes very often in case that NAT44 is configured and it has to process IP4 jumbo frames (9000B). |
+| 3 | `CSIT-1763 | Adapt ramp-up phase of nat44 tests for different frame sizes. |
+| | <https://jira.fd.io/browse/CSIT-1763>`_ | Currently ramp-up phase rate and duration values are correctly set for tests with 64B frame size. |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 5 | `CSIT-1591 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
-| | <https://jira.fd.io/browse/CSIT-1499>`_ | longer to program VPP). This needs to be addressed on the PAPI side. |
-| +-----------------------------------------+ |
-| | `VPP-1763 | |
-| | <https://jira.fd.io/browse/VPP-1763>`_ | |
+| 4 | `CSIT-1671 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
+| | <https://jira.fd.io/browse/CSIT-1671>`_ | longer to program VPP). This needs to be addressed on the PAPI side. |
+| +-----------------------------------------+ The usual PAPI library spends too much time parsing arguments, so even with async processing (hundreds of |
+| | `VPP-1763 | commands in flight over socket), the VPP configuration for large scale tests (millions of messages) takes |
+| | <https://jira.fd.io/browse/VPP-1763>`_ | too long. |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 6 | `VPP-1675 | IPv4 IPSEC 9000B packet tests are failing as no packet is forwarded. |
+| 5 | `VPP-1675 | IPv4 IPSEC 9000B packet tests are failing as no packet is forwarded. |
| | <https://jira.fd.io/browse/VPP-1675>`_ | Reason: chained buffers are not supported. |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 7 | `CSIT-1593 | IPv4 AVF 9000B packet tests are failing on 3n-skx while passing on 2n-skx. |
-| | <https://jira.fd.io/browse/CSIT-1593>`_ | |
+| 6 | `VPP-1934 | [i40e] Interfaces are not brought up from carrier-down. |
+| | <https://jira.fd.io/browse/VPP-1934>`_ | In case of i40e -based interface (e.g Intel x700 series NIC) is bound to kernel driver (i40e) and is in |
+| | | state "no-carrier" (<NO-CARRIER,BROADCAST,MULTICAST,UP>) because previously it was disabled via |
+| | | "I40E_AQ_PHY_LINK_ENABLED" call, then VPP during initialization of AVF interface is not re-enabling |
+| | | interface link via i40e driver to up. |
+| | | CSIT implemented `workaround for AVF interface <https://gerrit.fd.io/r/c/csit/+/29086>`_ until fixed. |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 8 | `CSIT-1675 | Intel Xeon 2n-skx, 3n-skx and 2n-clx testbeds behaviour and performance became inconsistent following |
-| | <https://jira.fd.io/browse/CSIT-1675>`_ | the upgrade to the latest Ubuntu 18.04 LTS kernel version (4.15.0-72-generic) and associated microcode |
-| | | packages (skx ucode 0x2000064, clx ucode 0x500002c). VPP as well as DPDK L3fwd tests are affected. |
+| 7 | `CSIT-1760 | All Mellanox / rdma driver tests are failing on LF testbed28 while successfully run on other LF testbeds. |
+| | <https://jira.fd.io/browse/CSIT-1760>`_ | |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 9 | `CSIT-1679 | All 2n-clx VPP ip4 tests with xxv710 and avf driver are failing. |
-| | <https://jira.fd.io/browse/CSIT-1679>`_ | |
+
+Root Cause Analysis for Performance Changes
+-------------------------------------------
+
+List of RCAs in |csit-release| for VPP performance changes:
+
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
-| 10 | `CSIT-1680 | Some 2n-clx cx556a rdma tests are failing. |
-| | <https://jira.fd.io/browse/CSIT-1680>`_ | |
+| # | JiraID | Issue Description |
++====+=========================================+===========================================================================================================+
+| 1 | | |
+| | | |
+----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+