Changes in CSIT |release|\r
-------------------------\r
\r
-#. Test environment changes in VPP data plane performance tests:\r
+#. **VPP performance tests**\r
\r
- - Further characterization and optimizations of VPP vhost-user and VM test\r
- methodology and test environment;\r
+ - *MRR tests* - New Maximum Receive Rate tests measure the packet\r
+ forwarding rate under the maximum load offered by traffic\r
+ generator over a set trial duration, regardless of packet loss.\r
+ MRR tests are used for continuous performance trending and for\r
+ comparison between releases.\r
\r
- - Tests with varying Qemu virtio queue (a.k.a. vring) sizes:\r
- [vr256] default 256 descriptors, [vr1024] 1024 descriptors to\r
- optimize for packet throughput;\r
+ - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy\r
+ tests measure performance of SRv6 Endpoint fronting SR-unaware\r
+ appliance via masquerading (End.AM), dynamic proxy (End.AD) or\r
+ static proxy (End.AS) SR functions.\r
\r
- - Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)`\r
- settings: [cfs] default settings, [cfsrr1] :abbr:`CFS (Completely Fair\r
- Scheduler)` RoundRobin(1) policy applied to all data plane threads\r
- handling test packet path including all VPP worker threads and all Qemu\r
- testpmd poll-mode threads;\r
+#. **Presentation and Analytics Layer**\r
\r
- - Resulting test cases are all combinations with [vr256,vr1024] and\r
- [cfs,cfsrr1] settings;\r
+ - *Performance trending* - Added continuous performance trending and\r
+ analysis. New Performance Trending and Performance Analysis jobs\r
+ executed regular throughput tests, with results being subsequently\r
+ analysed and trend and anomalies summarized and presented in VPP\r
+ Performance Dashboard and trendline graphs.\r
\r
- - For more detail see performance results observations section in\r
- this report;\r
+#. **Test Framework Optimizations**\r
\r
-#. Code updates and optimizations in CSIT performance framework:\r
+ - *Performance tests efficiency* - Qemu build/install optimizations,\r
+ warmup phase handling, vpp restart handling. Resulted in improved\r
+ stability and reduced total execution time by 30% for single pkt\r
+ size e.g. 64B/78B.\r
\r
- - Complete CSIT framework code revision and optimizations as descried\r
- on CSIT wiki page `Design_Optimizations\r
- <https://wiki.fd.io/view/CSIT/Design_Optimizations>`_.\r
+ - *General code housekeeping* - ongoing RF keywords optimizations,\r
+ removal of redundant RF keywords.\r
\r
- - For more detail see the :ref:`CSIT Framework Design <csit-design>` section\r
- in this report;\r
+Performance Changes\r
+-------------------\r
\r
-#. Changes to CSIT driver for TRex Traffic Generator:\r
+Relative performance changes in measured packet throughput in CSIT\r
+|release| are calculated against the results from CSIT |release-1|\r
+report. Listed mean and standard deviation values are computed based on\r
+a series of the same tests executed against respective VPP releases to\r
+verify test results repeatibility, with percentage change calculated for\r
+mean values. Note that the standard deviation is quite high for a small\r
+number of packet throughput tests, what indicates poor test results\r
+repeatability and makes the relative change of mean throughput value not\r
+fully representative for these tests. The root causes behind poor\r
+results repeatibility vary between the test cases.\r
\r
- - Complete refactor of TRex CSIT driver;\r
+NDR Changes\r
+~~~~~~~~~~~\r
\r
- - Introduction of packet traffic profiles to improve usability and\r
- manageability of traffic profiles for a growing number of test\r
- scenarios.\r
+NDR small packet throughput changes between releases are available in a\r
+CSV and pretty ASCII formats:\r
\r
- - Support for packet traffic profiles to test IPv4/IPv6 stateful and\r
- stateless DUT data plane features;\r
+ - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,\r
+ - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,\r
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,\r
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.\r
\r
-#. Added VPP performance tests\r
+PDR Changes\r
+~~~~~~~~~~~\r
\r
- - **Linux Container VPP memif virtual interface tests**\r
+NDR small packet throughput changes between releases are available in a\r
+CSV and pretty ASCII formats:\r
\r
- - VPP Memif virtual interface (shared memory interface) tests\r
- interconnecting VPP instances over memif. VPP vswitch\r
- instance runs in bare-metal user-mode handling Intel x520 NIC\r
- 10GbE interfaces and connecting over memif (Master side) virtual\r
- interfaces to another instance of VPP running in bare-metal Linux\r
- Container (LXC) with memif virtual interfaces (Slave side). LXC\r
- runs in a priviliged mode with VPP data plane worker threads\r
- pinned to dedicated physical CPU cores per usual CSIT practice.\r
- Both VPP run the same version of software. This test topology is\r
- equivalent to existing tests with vhost-user and VMs.\r
+ - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,\r
+ - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,\r
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,\r
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.\r
\r
- - **Stateful Security Groups**\r
+MRR Changes\r
+~~~~~~~~~~~\r
\r
- - New tests of VPP stateful security-groups a.k.a. acl-plugin\r
- functionally compatible with networking-vpp OpenStack;\r
+MRR small packet throughput changes between releases are available in a\r
+CSV and pretty ASCII formats:\r
\r
- - New tested security-groups access-control-lists (acl)\r
- configuration variants include: [iaclNsl] input acl stateless,\r
- [oaclNsl] output acl stateless, [iaclNsf] input acl stateful\r
- a.k.a. reflect, [oaclNsf] output acl stateful a.k.a. reflect,\r
- where N is number of access-control-entries (ace) in the acl.\r
+ - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,\r
+ - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,\r
+ - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,\r
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,\r
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,\r
+ - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.\r
\r
- - Testing packet flows transmitted by TG: 100, 10k, 100k, always\r
- hitting the last permit entry in acl.\r
+Throughput Trending\r
+-------------------\r
\r
- - **VPP vhost and VM tests**\r
+In addition to reporting throughput changes between VPP releases, CSIT\r
+provides continuous performance trending for VPP master branch:\r
\r
- - New VPP vhost-user and VM test cases to benchmark performance of\r
- VPP and VM topologies with Qemu and CFS policy combinations of\r
- [vr256,vr1024] x [cfs,cfsrr1];\r
+#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_\r
+ - per VPP test case throughput trend, trend compliance and summary of\r
+ detected anomalies.\r
\r
- - Statistical analysis of repeatibility of results;\r
-\r
-Performance Improvements\r
-------------------------\r
-\r
-Substantial improvements in measured packet throughput have been observed in a\r
-number of CSIT |release| tests listed below, with relative increase of\r
-double-digit percentage points. Relative improvements for this release are\r
-calculated against the test results listed in CSIT |release-1| report. The\r
-comparison is calculated between the mean values based on collected and\r
-archived test results' samples for involved VPP releases. Standard deviation\r
-has been also listed for CSIT |release|. VPP-16.09 and VPP-17.01 numbers are\r
-provided for reference.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_ndr_top.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{5cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_top.csv}\r
- }\r
-\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_pdr_top.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{5cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_top.csv}\r
- }\r
-\r
-\r
-Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-17.07 release notes\r
-<https://docs.fd.io/vpp/17.07/release_notes_1707.html>`_.\r
-\r
-Other Performance Changes\r
--------------------------\r
-\r
-Other changes in measured packet throughput, with either minor relative increase\r
-or decrease, have been observed in a number of CSIT |release| tests listed\r
-below. Relative changes are calculated against the test results listed in CSIT\r
-|release-1| report.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_ndr_low.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{5cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_low.csv}\r
- }\r
-\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_pdr_low.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{5cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_low.csv}\r
- }\r
+#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_\r
+ - throughput test metrics, trend calculations and anomaly\r
+ classification (progression, regression, outlier).\r
\r
+#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_\r
+ - per VPP build MRR throughput measurements against the trendline\r
+ with anomaly highlights, with associated CSIT test jobs.\r
\r
Known Issues\r
------------\r
\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
+List of known issues in CSIT |release| for VPP performance tests:\r
\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
| # | Issue | Jira ID | Description |\r
++===+=================================================+============+=================================================================+\r
+| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |\r
+| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |\r
+| | | | outside of LF testbeds. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Security-groups acl-plugin scale tests failure | CSIT-731 | VPP with 2 worker threads crashes during security-groups |\r
-| | with stateful acls if VPP with 2 worker threads | VPP-912 | iaclNsf and oaclNsf tests with 100k flows. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | VPP fails memif tests in 4 worker 2 core setup | CSIT-732 | VPP with 4 worker threads running on 2 physical cores crashes |\r
-| | | VPP-920 | during memif tests. Initial debugging points to DPDK code |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | NDR discovery test failures 1518B frame size | VPP-663 | VPP reporting errors: dpdk-input Rx ip checksum errors. |\r
-| | for ip4scale200k, ip4scale2m scale IPv4 routed- | | Observed frequency: all test runs. |\r
-| | forwarding tests. ip4scale20k tests are fine. | | |\r
+| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
+| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. |\r
+| | xl710 and x710 NICs, compared to x520 NICs. | | |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. |\r
-| | | | |\r
+| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |\r
+| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd |\r
+| | | | performance tests. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 5 | Sporadic NDR discovery test failures on x520. | CSIT-750 | Suspected issue with HW settings (BIOS, FW) in LF |\r
-| | | | infrastructure. Issue can't be replicated outside LF. |\r
+| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR |\r
+| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 6 | VPP in 2t2c setups - large variation | CSIT-568 | Suspected NIC firmware or DPDK driver issue affecting NDR |\r
-| | of discovered NDR throughput values across | | throughput. Applies to XL710 and X710 NICs, x520 NICs are fine. |\r
-| | multiple test runs with xl710 and x710 NICs. | | |\r
+| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data |\r
+| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected |\r
+| | | | issue with Ligato vpp-agent. |\r
+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 7 | Lower than expected NDR and PDR throughput with | CSIT-569 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
-| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-\r