#. VPP PERFORMANCE TESTS
+ - **Intel Xeon 2n-skx, 3n-skx testbeds**: VPP performance test data
+ is provided using a different CSIT test environment compared to
+ CSIT-1908.1 and CSIT-1908. The changes were applied during the
+ CSIT-2001 development cycle.
+
+ - CSIT test environment is now versioned, with ver. 1 associated
+ with CSIT rls1908 git branch as of 2019-08-21, and ver. 2
+ associated with CSIT rls2001 git branch as of 2020-03-27.
+
+ - To identify performance changes due to VPP code changes from
+ v19.08.1 to v19.08.2, both have been tested in CSIT
+ environment ver. 2. See
+ :ref:`vpp_compare_current_vs_previous_release` and
+ :ref:`vpp_known_issues`.
+
+ - **Intel Xeon 2n-clx testbeds**: VPP performance test data is now
+ included in this report. See :ref:`vpp_known_issues`.
+
- **Service density 2n-skx tests**: Added higher NF density tests with
802.1q (vlan) and VXLAN encapsulation from Traffic Generator.
| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. |
| | <https://jira.fd.io/browse/VPP-662>`_ | |
+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 3 | `CSIT-1503 | [`TRex-519 <https://trex-tgn.cisco.com/youtrack/issue/trex-519>`_] XL710/XXV710 with FW 6.0.1 will have |
-| | <https://jira.fd.io/browse/CSIT-1503>`_ | Rx drop rate of 27MPPS. |
-+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 4 | `CSIT-1498 | Memif tests are sporadically failing on initialization of memif connection. |
+| 3 | `CSIT-1498 | Memif tests are sporadically failing on initialization of memif connection. |
| | <https://jira.fd.io/browse/CSIT-1498>`_ | |
+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 5 | `CSIT-1499 | AVF tests are sporadically failing on initialization of AVF interface. |
-| | <https://jira.fd.io/browse/CSIT-1499>`_ | |
-+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 6 | `VPP-1676 | 9000B ip4 memif errors - ip4-input: ip4 length > l2 length. |
+| 4 | `VPP-1676 | 9000B ip4 memif errors - ip4-input: ip4 length > l2 length. |
| | <https://jira.fd.io/browse/VPP-1676>`_ | IP4 jumbo frames (9000B) are dropped in case of tests with memif. |
+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 7 | `VPP-1677 | 9000B ip4 nat44: VPP crash + coredump. |
+| 5 | `VPP-1677 | 9000B ip4 nat44: VPP crash + coredump. |
| | <https://jira.fd.io/browse/VPP-1677>`_ | VPP crashes very often in case that NAT44 is configured and it has to process IP4 jumbo frames (9000B). |
+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 8 | `CSIT-1591 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
-| | <https://jira.fd.io/browse/CSIT-1499>`_ | longer to program VPP). This needs to be addressed on the PAPI side. |
+| 6 | `CSIT-1591 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
+| | <https://jira.fd.io/browse/CSIT-1591>`_ | longer to program VPP). This needs to be addressed on the PAPI side. |
| +-----------------------------------------+ |
| | `VPP-1763 | |
| | <https://jira.fd.io/browse/VPP-1763>`_ | |
+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 9 | `CSIT-1592 | VPP memif API does not enable memif zero-copy, resulting in different memif configuration vs. previously |
-| | <https://jira.fd.io/browse/CSIT-1592>`_ | tested VAT/CLI where memif zero-copy was enabled by default. Needs to be fixed in VPP. |
-| +-----------------------------------------+ |
-| | `VPP-1764 | |
-| | <https://jira.fd.io/browse/VPP-1764>`_ | |
-+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 10 | `VPP-1675 | IPv4 IPSEC 9000B packet tests are failing as no packet is forwarded. |
-| | <https://jira.fd.io/browse/VPP-1675>`_ | Reason: chained buffers are not supported. |
-+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-| 11 | `CSIT-1593 | IPv4 AVF 9000B packet tests are failing on 3n-skx while passing on 2n-skx. |
+| 7 | `CSIT-1593 | IPv4 AVF 9000B packet tests are failing on 3n-skx while passing on 2n-skx. |
| | <https://jira.fd.io/browse/CSIT-1593>`_ | |
-+----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
-
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
\ No newline at end of file
Code Review / csit.git / blobdiff