VPP latency results are generated based on the test data obtained from
|csit-release| NDR-PDR throughput tests executed across physical
-testbeds hosted in LF FD.io labs: 3n-hsw, 3n-skx, 2n- skx, 2n-clx,
-3n-dnv, 2n-dnv, 3n-tsh.
+testbeds hosted in LF FD.io labs: 2n-icx, 3n-icx, 2n-aws, 2n-skx, 3n-skx,
+2n-clx, 2n-zn2, 3n-alt, 3n-tsh, 2n-tx2.
Latency by percentile distribution plots are used to show packet latency
percentiles at different packet rate load levels: i) No-Load latency
streams only, ii) Low-Load at 10% PDR, iii) Mid-Load at 50% PDR and iv)
High-Load at 90% PDR.
+For more details, see :ref:`latency_methodology`.
+
Additional information about graph data:
#. **Graph Title**: describes tested DUT packet path.
.. note::
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_ and
- `FD.io test executor vpp performance job 3n-tsh`_ with RF
+ Test results are stored in
+ `build logs from FD.io vpp performance job 2n-icx`_,
+ `build logs from FD.io vpp performance job 3n-icx`_,
+ `build logs from FD.io vpp performance job 2n-aws`_,
+ `build logs from FD.io vpp performance job 2n-skx`_,
+ `build logs from FD.io vpp performance job 3n-skx`_,
+ `build logs from FD.io vpp performance job 2n-clx`_,
+ `build logs from FD.io vpp performance job 2n-zn2`_,
+ `build logs from FD.io vpp performance job 3n-alt`_,
+ `build logs from FD.io vpp performance job 3n-tsh`_ and
+ `build logs from FD.io vpp performance job 2n-tx2`_ with RF
result files csit-vpp-perf-|srelease|-\*.zip
`archived here <../../_static/archive/>`_.
l2
ip4
+ ip6
+ srv6
ip4_tunnels
nat44
vm_vhost
container_memif
ipsec
-
-..
- ip6
- srv6