VIC-1385 by Cisco.
+.. topic:: NIC_Amazon-Nitro-50G
+
+ Amazon EC2 ENA NIC.
+
Scaling Tags
------------
Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
one direction.
+.. topic:: HOSTS_1024
+
+ Stateless or stateful traffic stream with 1024 client source IP4 addresses,
+ usually with 63 flow differing in source port number. Could be UDP or TCP.
+ If NAT is used, the clients are inside. Outside IP range can differ.
+
+.. topic:: HOSTS_4096
+
+ Stateless or stateful traffic stream with 4096 client source IP4 addresses,
+ usually with 63 flow differing in source port number. Could be UDP or TCP.
+ If NAT is used, the clients are inside. Outside IP range can differ.
+
+.. topic:: HOSTS_16384
+
+ Stateless or stateful traffic stream with 16384 client source IP4 addresses,
+ usually with 63 flow differing in source port number. Could be UDP or TCP.
+ If NAT is used, the clients are inside. Outside IP range can differ.
+
+.. topic:: HOSTS_65536
+
+ Stateless or stateful traffic stream with 65536 client source IP4 addresses,
+ usually with 63 flow differing in source port number. Could be UDP or TCP.
+ If NAT is used, the clients are inside. Outside IP range can differ.
+
+.. topic:: HOSTS_262144
+
+ Stateless or stateful traffic stream with 262144 client source IP4 addresses
+ usually with 63 flow differing in source port number. Could be UDP or TCP.
+ If NAT is used, the clients are inside. Outside IP range can differ.
+
+.. topic:: GENEVE4_1TUN
+
+ Test with 1 GENEVE IPv4 tunnel.
+
+.. topic:: GENEVE4_4TUN
+
+ Test with 4 GENEVE IPv4 tunnels.
+
+.. topic:: GENEVE4_16TUN
+
+ Test with 16 GENEVE IPv4 tunnels.
+
+.. topic:: GENEVE4_64TUN
+
+ Test with 64 GENEVE IPv4 tunnels.
+
+.. topic:: GENEVE4_256TUN
+
+ Test with 256 GENEVE IPv4 tunnels.
+
+.. topic:: GENEVE4_1024TUN
+
+ Test with 1024 GENEVE IPv4 tunnels.
+
Test Category Tags
------------------
.. topic:: BASE
Baseline test cases, no encapsulation, no feature(s) configured in tests.
+ No scaling whatsoever, beyond minimum needed for RSS.
.. topic:: IP4BASE
IPv4 baseline test cases, no encapsulation, no feature(s) configured in
- tests.
+ tests. Minimal number of routes. Other quantities may be scaled.
.. topic:: IP6BASE
.. topic:: SCALE
- Scale test cases.
+ Scale test cases. Other tags specify which quantities are scaled.
+ Also applies if scaling is set on TG only (e.g. DUT works as IP4BASE).
.. topic:: ENCAP
At least one feature is configured in test cases. Use also feature tag(s).
+.. topic:: UDP
+
+ Tests which use any kind of UDP traffic (STL or ASTF profile).
+
.. topic:: TCP
- Tests which use TCP.
+ Tests which use any kind of TCP traffic (STL or ASTF profile).
+
+..
+ TODO: Should we define tags STL and ASTF?
+
+.. topic:: UDP_UDIR
+
+ Tests which use unidirectional UDP traffic (STL profile only).
+
+.. topic:: UDP_BIDIR
+
+ Tests which use bidirectional UDP traffic (STL profile only).
+
+.. topic:: UDP_CPS
+
+ Tests which measure connections per second on minimal UDP pseudoconnections.
+ This implies ASTF traffic profile is used.
+ This tag selects specific output processing in PAL.
.. topic:: TCP_CPS
- Performance tests which measure connections per second using http requests.
+ Tests which measure connections per second on empty TCP connections.
+ This implies ASTF traffic profile is used.
+ This tag selects specific output processing in PAL.
.. topic:: TCP_RPS
- Performance tests which measure requests per second using http requests.
+ Tests which measure requests per second on empty TCP connections.
+ This implies ASTF traffic profile is used.
+ This tag selects specific output processing in PAL.
+
+.. topic:: UDP_PPS
+
+ Tests which measure packets per second on lightweight UDP transactions.
+ This implies ASTF traffic profile is used.
+ This tag selects specific output processing in PAL.
+
+.. topic:: TCP_PPS
+
+ Tests which measure packets per second on lightweight TCP transactions.
+ This implies ASTF traffic profile is used.
+ This tag selects specific output processing in PAL.
.. topic:: HTTP
- Tests which use HTTP.
+ Tests which use traffic formed of valid HTTP requests (and responses).
+
+..
+ TODO: Add HTTP tag to the current hoststack tests.
+ TODO: Document other tags already used by hoststack tests.
+
+.. topic:: LDP_NGINX
+
+ LDP NGINX is un-modified NGINX with VPP via LD_PRELOAD.
.. topic:: NF_DENSITY
All test cases with GRE.
+.. topic:: GTPU
+
+ All test cases with GTPU.
+
.. topic:: IPSEC
All test cases with IPSEC.
All SRv6 test cases with two SIDs and without decapsulation.
+.. topic:: GENEVE
+
+ All test cases with GENEVE.
+
+.. topic:: GENEVE_L3MODE
+
+ All test cases with GENEVE tunnel in L3 mode.
+
Interface Tags
--------------
All test cases which use physical interface(s).
+.. topic:: GSO
+
+ All test cases which uses Generic Segmentation Offload.
+
.. topic:: VHOST
All test cases which uses VHOST.
iACL destination.
-.. topic:: COPWHLIST
+.. topic:: ADLALWLIST
- COP whitelist.
+ ADL allowlist.
.. topic:: NAT44
IPSec using HMAC SHA 512 integrity algorithms.
+.. topic:: SCHEDULER
+
+ IPSec using crypto sw scheduler engine.
+
Client-Workload Tags
--------------------
8 worker threads each pinned to a separate logical core within 4 dedicated
physical cores. 4 receive queues per interface. Main thread pinned to core
1.
-
-Honeycomb Tags
---------------
-
-.. topic:: HC_FUNC
-
- Honeycomb functional test cases.
-
-.. topic:: HC_NSH
-
- Honeycomb NSH test cases.
-
-.. topic:: HC_PERSIST
-
- Honeycomb persistence test cases.
-
-.. topic:: HC_REST_ONLY
-
- (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
- using ODL client for Restfconf -> Netconf translation.