docs: better docs, mv doxygen to sphinx

[vpp.git] / docs / usecases / contiv / VMWARE_FUSION_HOST.md

diff --git a/docs/usecases/contiv/VMWARE_FUSION_HOST.md b/docs/usecases/contiv/VMWARE_FUSION_HOST.md
deleted file mode 100644 (file)
index d4e251c..0000000
--- a/docs/usecases/contiv/VMWARE_FUSION_HOST.md
+++ /dev/null
@@ -1,52 +0,0 @@
-### Preparing a VmWare Fusion Host
-The *vmxnet3 driver* is required on a GigE Network Adapter used by VPP. On VmWare
-Fusion, the default Network Adapter driver is an *Intel 82545EM (e1000)*, and there
-is no GUI to change it to *vmxnet3*. The change must be done manually in the VM's
-configuration file as follows:
-
-- Bring up the VM library window: **Window -> Virtual Machine Library**
-- Right click on the VM where you want to change the driver:
-  <*VM-Name*> **-> Show in Finder**. This pops up a new Finder window with a line
-  for each VM that Fusion knows about.
-- Right click on the VM where you want to change the driver:
-  <*VM-Name*> **-> Show package contents**. This brings up a window with the 
-  contents of the package.
-- Open the file <*VM-Name*> **.vmx** with your favorite text editor.
-- For each Network Adapter that you want used by VPP, look for the 
-  Network Adapter's driver configuration. For example, for the VM's first
-  Network Adapter look for:
-  ```
-  ethernet0.virtualDev = "e1000"
-  ```
-  Replace `e1000` with `vmxnet3`:
-  ```
-  ethernet0.virtualDev = "vmxnet3"
-  ```
-and restart the VM.
-
-If you replaced the driver on your VM's primary Network Adapter, you will 
-have to change the primary network interface configuration in Linux. 
-
-First, get the new primary network interface name:
-```
-sudo lshw -class network -businfo
-
-Bus info          Device      Class          Description
-========================================================
-pci@0000:03:00.0  ens160      network        VMXNET3 Ethernet Controller
-```
-Replace the existing primary network interface name in `/etc/network/interfaces`
-with the above device name (ens160):
-```
-# This file describes the network interfaces available on your system,
-# and how to activate them. For more information, see interfaces(5).
-
-source /etc/network/interfaces.d/*
-
-# The loopback network interface
-auto lo
-iface lo inet loopback
-
-# The primary network interface
-auto ens160
-iface ens160 inet dhcp
\ No newline at end of file