# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/performance_setup.robot
| Resource | resources/libraries/robot/DPDK/default.robot
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.DPDK.DPDKTools
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | 1NUMA
| ... | NIC_Intel-X520-DA2 | DPDK | IP4FWD | BASE | ETH
-| Suite Setup | DPDK 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model
| ... | L3 | Intel-X520-DA2
-| Suite Teardown | DPDK 3-node Performance Suite Teardown
+| Suite Teardown | Tear down DPDK 3-node performance topology
| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4dst253
*** Test Cases ***
| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core, \
-| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
-| | ... | using binary search start at 10GE linerate, step 100kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 100kpps.
+| | ...
| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc02-64B-1t1c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core, \
-| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
-| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
+| | ...
| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core, \
-| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
-| | ... | using binary search start at 10GE linerate, step 10kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 10kpps.
+| | ...
| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc04-1518B-1t1c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core, \
-| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
-| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
+| | ...
| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core, \
-| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
-| | ... | using binary search start at 10GE linerate, step 5kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 5kpps.
+| | ...
| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and rxqueues '1' with jumbo frames 'yes'
+| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc06-9000B-1t1c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core, \
-| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
-| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
+| | ...
| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and rxqueues '1' with jumbo frames 'yes'
+| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores, \
-| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
-| | ... | using binary search start at 10GE linerate, step 100kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 100kpps.
+| | ...
| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc08-64B-2t2c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores, \
-| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
-| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
+| | ...
| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores, \
-| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
-| | ... | using binary search start at 10GE linerate, step 10kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 10kpps.
+| | ...
| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc10-1518B-2t2c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores, \
-| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
-| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
+| | ...
| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and rxqueues '1' with jumbo frames 'no'
+| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores, \
-| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
-| | ... | using binary search start at 10GE linerate, step 5kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 5kpps.
+| | ...
| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and rxqueues '1' with jumbo frames 'yes'
+| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc12-9000B-2t2c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores, \
-| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
-| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
+| | ...
| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and rxqueues '1' with jumbo frames 'yes'
+| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores, \
-| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
-| | ... | using binary search start at 10GE linerate, step 100kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 100kpps.
+| | ...
| | [Tags] | 4T4C | MTHREAD | NDRDISC
+| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and rxqueues '2' with jumbo frames 'no'
+| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc14-64B-4t4c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores, \
-| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
-| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
+| | ...
| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and rxqueues '2' with jumbo frames 'no'
+| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores, \
-| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
-| | ... | using binary search start at 10GE linerate, step 10kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 10kpps.
+| | ...
| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and rxqueues '2' with jumbo frames 'no'
+| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc16-1518B-4t4c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores, \
-| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
-| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
+| | ...
| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and rxqueues '2' with jumbo frames 'no'
+| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores, \
-| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
-| | ... | using binary search start at 10GE linerate, step 5kpps.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 5kpps.
+| | ...
| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and rxqueues '2' with jumbo frames 'yes'
+| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes'
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| tc18-9000B-4t4c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores, \
-| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
-| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
+| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
+| | ...
| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and rxqueues '2' with jumbo frames 'yes'
+| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-l3fwd
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}