RTE_COMP_FF_CRC32_ADLER32_CHECKSUM |
RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
RTE_COMP_FF_HUFFMAN_FIXED |
+ RTE_COMP_FF_HUFFMAN_DYNAMIC |
RTE_COMP_FF_OOP_SGL_IN_SGL_OUT |
RTE_COMP_FF_OOP_SGL_IN_LB_OUT |
RTE_COMP_FF_OOP_LB_IN_SGL_OUT,
/* store a link to the qp in the qat_pci_device */
qat_private->qat_dev->qps_in_use[QAT_SERVICE_COMPRESSION][qp_id]
- = *qp_addr;
+ = *qp_addr;
qp = (struct qat_qp *)*qp_addr;
return ret;
}
+
+#define QAT_IM_BUFFER_DEBUG 0
+static const struct rte_memzone *
+qat_comp_setup_inter_buffers(struct qat_comp_dev_private *comp_dev,
+ uint32_t buff_size)
+{
+ char inter_buff_mz_name[RTE_MEMZONE_NAMESIZE];
+ const struct rte_memzone *memzone;
+ uint8_t *mz_start = NULL;
+ rte_iova_t mz_start_phys = 0;
+ struct array_of_ptrs *array_of_pointers;
+ int size_of_ptr_array;
+ uint32_t full_size;
+ uint32_t offset_of_sgls, offset_of_flat_buffs = 0;
+ int i;
+ int num_im_sgls = qat_gen_config[
+ comp_dev->qat_dev->qat_dev_gen].comp_num_im_bufs_required;
+
+ QAT_LOG(DEBUG, "QAT COMP device %s needs %d sgls",
+ comp_dev->qat_dev->name, num_im_sgls);
+ snprintf(inter_buff_mz_name, RTE_MEMZONE_NAMESIZE,
+ "%s_inter_buff", comp_dev->qat_dev->name);
+ memzone = rte_memzone_lookup(inter_buff_mz_name);
+ if (memzone != NULL) {
+ QAT_LOG(DEBUG, "QAT COMP im buffer memzone created already");
+ return memzone;
+ }
+
+ /* Create a memzone to hold intermediate buffers and associated
+ * meta-data needed by the firmware. The memzone contains 3 parts:
+ * - a list of num_im_sgls physical pointers to sgls
+ * - the num_im_sgl sgl structures, each pointing to
+ * QAT_NUM_BUFS_IN_IM_SGL flat buffers
+ * - the flat buffers: num_im_sgl * QAT_NUM_BUFS_IN_IM_SGL
+ * buffers, each of buff_size
+ * num_im_sgls depends on the hardware generation of the device
+ * buff_size comes from the user via the config file
+ */
+
+ size_of_ptr_array = num_im_sgls * sizeof(phys_addr_t);
+ offset_of_sgls = (size_of_ptr_array + (~QAT_64_BYTE_ALIGN_MASK))
+ & QAT_64_BYTE_ALIGN_MASK;
+ offset_of_flat_buffs =
+ offset_of_sgls + num_im_sgls * sizeof(struct qat_inter_sgl);
+ full_size = offset_of_flat_buffs +
+ num_im_sgls * buff_size * QAT_NUM_BUFS_IN_IM_SGL;
+
+ memzone = rte_memzone_reserve_aligned(inter_buff_mz_name, full_size,
+ comp_dev->compressdev->data->socket_id,
+ RTE_MEMZONE_2MB, QAT_64_BYTE_ALIGN);
+ if (memzone == NULL) {
+ QAT_LOG(ERR, "Can't allocate intermediate buffers"
+ " for device %s", comp_dev->qat_dev->name);
+ return NULL;
+ }
+
+ mz_start = (uint8_t *)memzone->addr;
+ mz_start_phys = memzone->phys_addr;
+ QAT_LOG(DEBUG, "Memzone %s: addr = %p, phys = 0x%"PRIx64
+ ", size required %d, size created %zu",
+ inter_buff_mz_name, mz_start, mz_start_phys,
+ full_size, memzone->len);
+
+ array_of_pointers = (struct array_of_ptrs *)mz_start;
+ for (i = 0; i < num_im_sgls; i++) {
+ uint32_t curr_sgl_offset =
+ offset_of_sgls + i * sizeof(struct qat_inter_sgl);
+ struct qat_inter_sgl *sgl =
+ (struct qat_inter_sgl *)(mz_start + curr_sgl_offset);
+ int lb;
+ array_of_pointers->pointer[i] = mz_start_phys + curr_sgl_offset;
+
+ sgl->num_bufs = QAT_NUM_BUFS_IN_IM_SGL;
+ sgl->num_mapped_bufs = 0;
+ sgl->resrvd = 0;
+
+#if QAT_IM_BUFFER_DEBUG
+ QAT_LOG(DEBUG, " : phys addr of sgl[%i] in array_of_pointers"
+ " = 0x%"PRIx64, i, array_of_pointers->pointer[i]);
+ QAT_LOG(DEBUG, " : virt address of sgl[%i] = %p", i, sgl);
+#endif
+ for (lb = 0; lb < QAT_NUM_BUFS_IN_IM_SGL; lb++) {
+ sgl->buffers[lb].addr =
+ mz_start_phys + offset_of_flat_buffs +
+ (((i * QAT_NUM_BUFS_IN_IM_SGL) + lb) * buff_size);
+ sgl->buffers[lb].len = buff_size;
+ sgl->buffers[lb].resrvd = 0;
+#if QAT_IM_BUFFER_DEBUG
+ QAT_LOG(DEBUG,
+ " : sgl->buffers[%d].addr = 0x%"PRIx64", len=%d",
+ lb, sgl->buffers[lb].addr, sgl->buffers[lb].len);
+#endif
+ }
+ }
+#if QAT_IM_BUFFER_DEBUG
+ QAT_DP_HEXDUMP_LOG(DEBUG, "IM buffer memzone start:",
+ mz_start, offset_of_flat_buffs + 32);
+#endif
+ return memzone;
+}
+
static struct rte_mempool *
qat_comp_create_xform_pool(struct qat_comp_dev_private *comp_dev,
uint32_t num_elements)
static void
_qat_comp_dev_config_clear(struct qat_comp_dev_private *comp_dev)
{
+ /* Free intermediate buffers */
+ if (comp_dev->interm_buff_mz) {
+ rte_memzone_free(comp_dev->interm_buff_mz);
+ comp_dev->interm_buff_mz = NULL;
+ }
+
/* Free private_xform pool */
if (comp_dev->xformpool) {
/* Free internal mempool for private xforms */
return -EINVAL;
}
+ if (RTE_PMD_QAT_COMP_IM_BUFFER_SIZE == 0) {
+ QAT_LOG(WARNING,
+ "RTE_PMD_QAT_COMP_IM_BUFFER_SIZE = 0 in config file, so"
+ " QAT device can't be used for Dynamic Deflate. "
+ "Did you really intend to do this?");
+ } else {
+ comp_dev->interm_buff_mz =
+ qat_comp_setup_inter_buffers(comp_dev,
+ RTE_PMD_QAT_COMP_IM_BUFFER_SIZE);
+ if (comp_dev->interm_buff_mz == NULL) {
+ ret = -ENOMEM;
+ goto error_out;
+ }
+ }
+
comp_dev->xformpool = qat_comp_create_xform_pool(comp_dev,
config->max_nb_priv_xforms);
if (comp_dev->xformpool == NULL) {
.private_xform_free = qat_comp_private_xform_free
};
+/* An rte_driver is needed in the registration of the device with compressdev.
+ * The actual qat pci's rte_driver can't be used as its name represents
+ * the whole pci device with all services. Think of this as a holder for a name
+ * for the compression part of the pci device.
+ */
+static const char qat_comp_drv_name[] = RTE_STR(COMPRESSDEV_NAME_QAT_PMD);
+static const struct rte_driver compdev_qat_driver = {
+ .name = qat_comp_drv_name,
+ .alias = qat_comp_drv_name
+};
int
qat_comp_dev_create(struct qat_pci_device *qat_pci_dev)
{
QAT_LOG(ERR, "Compression PMD not supported on QAT dh895xcc");
return 0;
}
+ if (qat_pci_dev->qat_dev_gen == QAT_GEN3) {
+ QAT_LOG(ERR, "Compression PMD not supported on QAT c4xxx");
+ return 0;
+ }
struct rte_compressdev_pmd_init_params init_params = {
.name = "",
qat_pci_dev->name, "comp");
QAT_LOG(DEBUG, "Creating QAT COMP device %s", name);
+ /* Populate subset device to use in compressdev device creation */
+ qat_pci_dev->comp_rte_dev.driver = &compdev_qat_driver;
+ qat_pci_dev->comp_rte_dev.numa_node =
+ qat_pci_dev->pci_dev->device.numa_node;
+ qat_pci_dev->comp_rte_dev.devargs = NULL;
+
compressdev = rte_compressdev_pmd_create(name,
- &qat_pci_dev->pci_dev->device,
+ &(qat_pci_dev->comp_rte_dev),
sizeof(struct qat_comp_dev_private),
&init_params);
switch (qat_pci_dev->qat_dev_gen) {
case QAT_GEN1:
case QAT_GEN2:
+ case QAT_GEN3:
comp_dev->qat_dev_capabilities = qat_comp_gen_capabilities;
break;
default: