status = ixgbe_init_ops_X550(hw);
break;
case ixgbe_mac_X550EM_x:
+ status = ixgbe_init_ops_X550EM_x(hw);
+ break;
case ixgbe_mac_X550EM_a:
- status = ixgbe_init_ops_X550EM(hw);
+ status = ixgbe_init_ops_X550EM_a(hw);
break;
case ixgbe_mac_82599_vf:
case ixgbe_mac_X540_vf:
case IXGBE_DEV_ID_82599EN_SFP:
case IXGBE_DEV_ID_82599_CX4:
case IXGBE_DEV_ID_82599_LS:
+ case IXGBE_DEV_ID_82599_BYPASS:
case IXGBE_DEV_ID_82599_T3_LOM:
hw->mac.type = ixgbe_mac_82599EB;
break;
break;
case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
+ case IXGBE_DEV_ID_X540_BYPASS:
hw->mac.type = ixgbe_mac_X540;
hw->mvals = ixgbe_mvals_X540;
break;
case IXGBE_DEV_ID_X550EM_A_KR:
case IXGBE_DEV_ID_X550EM_A_KR_L:
case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_SGMII:
+ case IXGBE_DEV_ID_X550EM_A_SGMII_L:
case IXGBE_DEV_ID_X550EM_A_1G_T:
case IXGBE_DEV_ID_X550EM_A_1G_T_L:
case IXGBE_DEV_ID_X550EM_A_10G_T:
* ixgbe_set_vfta - Set VLAN filter table
* @hw: pointer to hardware structure
* @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN
+ * @vlvf_bypass: boolean flag indicating updating the default pool is okay
*
* Turn on/off specified VLAN in the VLAN filter table.
**/
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
+ bool vlvf_bypass)
{
return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
- vlan_on), IXGBE_NOT_IMPLEMENTED);
+ vlan_on, vlvf_bypass), IXGBE_NOT_IMPLEMENTED);
}
/**
* ixgbe_set_vlvf - Set VLAN Pool Filter
* @hw: pointer to hardware structure
* @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
- * @vfta_changed: pointer to boolean flag which indicates whether VFTA
- * should be changed
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VLVF
+ * @vfta_delta: pointer to the difference between the current value of VFTA
+ * and the desired value
+ * @vfta: the desired value of the VFTA
+ * @vlvf_bypass: boolean flag indicating updating the default pool is okay
*
* Turn on/off specified bit in VLVF table.
**/
s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
- bool *vfta_changed)
+ u32 *vfta_delta, u32 vfta, bool vlvf_bypass)
{
return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
- vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED);
+ vlan_on, vfta_delta, vfta, vlvf_bypass),
+ IXGBE_NOT_IMPLEMENTED);
}
/**
hw->mac.ops.release_swfw_sync(hw, mask);
}
+/**
+ * ixgbe_init_swfw_semaphore - Clean up SWFW semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Attempts to acquire the SWFW semaphore through SW_FW_SYNC register.
+ * Regardless of whether is succeeds or not it then release the semaphore.
+ * This is function is called to recover from catastrophic failures that
+ * may have left the semaphore locked.
+ **/
+void ixgbe_init_swfw_semaphore(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.init_swfw_sync)
+ hw->mac.ops.init_swfw_sync(hw);
+}
+
void ixgbe_disable_rx(struct ixgbe_hw *hw)
{