DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_QSFP:
+ case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
supported = true;
case IXGBE_DEV_ID_82599_T3_LOM:
case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
+ case IXGBE_DEV_ID_X540_BYPASS:
case IXGBE_DEV_ID_X550T:
case IXGBE_DEV_ID_X550T1:
case IXGBE_DEV_ID_X550EM_X_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T_L:
supported = true;
break;
default:
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
- "Device %x does not support flow control autoneg",
- hw->device_id);
+ if (!supported)
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
return supported;
}
goto out;
/* only backplane uses autoc so fall though */
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
{
s32 ret_val;
u32 ctrl_ext;
+ u16 device_caps;
DEBUGFUNC("ixgbe_start_hw_generic");
/* Setup flow control */
ret_val = ixgbe_setup_fc(hw);
- if (ret_val != IXGBE_SUCCESS)
- goto out;
+ if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED)
+ return ret_val;
+
+ /* Cache bit indicating need for crosstalk fix */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ hw->mac.ops.get_device_caps(hw, &device_caps);
+ if (device_caps & IXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
+ hw->need_crosstalk_fix = false;
+ else
+ hw->need_crosstalk_fix = true;
+ break;
+ default:
+ hw->need_crosstalk_fix = false;
+ break;
+ }
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
-out:
- return ret_val;
+ return IXGBE_SUCCESS;
}
/**
if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
- IXGBE_EE_CTRL_4_INST_ID_SHIFT;
+ IXGBE_EE_CTRL_4_INST_ID_SHIFT;
}
}
DEBUGFUNC("ixgbe_led_on_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/* To turn on the LED, set mode to ON. */
led_reg &= ~IXGBE_LED_MODE_MASK(index);
led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
DEBUGFUNC("ixgbe_led_off_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/* To turn off the LED, set mode to OFF. */
led_reg &= ~IXGBE_LED_MODE_MASK(index);
led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
* advertised settings
**/
s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
- u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+ u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
{
if ((!(adv_reg)) || (!(lp_reg))) {
ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
switch (hw->phy.media_type) {
/* Autoneg flow control on fiber adapters */
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
if (speed == IXGBE_LINK_SPEED_1GB_FULL)
**/
s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
{
- int secrxreg;
+ u32 secrxreg;
DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
DEBUGFUNC("ixgbe_blink_led_start_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/*
* Link must be up to auto-blink the LEDs;
* Force it if link is down.
DEBUGFUNC("ixgbe_blink_led_stop_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
+
ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
if (ret_val != IXGBE_SUCCESS)
goto out;
vfta_delta = 1 << (vlan % 32);
vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
- /* vfta_delta represents the difference between the current value
+ /*
+ * vfta_delta represents the difference between the current value
* of vfta and the value we want in the register. Since the diff
* is an XOR mask we can just update the vfta using an XOR
*/
* @vind: VMDq output index that maps queue to VLAN id in VLVFB
* @vlan_on: boolean flag to turn on/off VLAN in VLVF
* @vfta_delta: pointer to the difference between the current value of VFTA
- * and the desired value
+ * and the desired value
* @vfta: the desired value of the VFTA
* @vlvf_bypass: boolean flag indicating updating default pool is okay
*
*/
if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
return IXGBE_SUCCESS;
+
vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
if (vlvf_index < 0)
return vlvf_index;
return IXGBE_SUCCESS;
}
+
/* If there are still bits set in the VLVFB registers
* for the VLAN ID indicated we need to see if the
* caller is requesting that we clear the VFTA entry bit.
return IXGBE_SUCCESS;
}
+/**
+ * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
+ * @hw: pointer to hardware structure
+ *
+ * Contains the logic to identify if we need to verify link for the
+ * crosstalk fix
+ **/
+static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
+{
+
+ /* Does FW say we need the fix */
+ if (!hw->need_crosstalk_fix)
+ return false;
+
+ /* Only consider SFP+ PHYs i.e. media type fiber */
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ case ixgbe_media_type_fiber_qsfp:
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
/**
* ixgbe_check_mac_link_generic - Determine link and speed status
* @hw: pointer to hardware structure
DEBUGFUNC("ixgbe_check_mac_link_generic");
+ /* If Crosstalk fix enabled do the sanity check of making sure
+ * the SFP+ cage is full.
+ */
+ if (ixgbe_need_crosstalk_fix(hw)) {
+ u32 sfp_cage_full;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+ IXGBE_ESDP_SDP2;
+ break;
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+ IXGBE_ESDP_SDP0;
+ break;
+ default:
+ /* sanity check - No SFP+ devices here */
+ sfp_cage_full = false;
+ break;
+ }
+
+ if (!sfp_cage_full) {
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ return IXGBE_SUCCESS;
+ }
+ }
+
/* clear the old state */
links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
*speed = IXGBE_LINK_SPEED_5GB_FULL;
}
break;
+ case IXGBE_LINKS_SPEED_10_X550EM_A:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+ hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+ *speed = IXGBE_LINK_SPEED_10_FULL;
+ }
+ break;
default:
*speed = IXGBE_LINK_SPEED_UNKNOWN;
}
/* first pull in the header so we know the buffer length */
for (bi = 0; bi < dword_len; bi++) {
buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
- IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ IXGBE_LE32_TO_CPUS((uintptr_t)&buffer[bi]);
}
/* If there is any thing in data position pull it in */
/* Pull in the rest of the buffer (bi is where we left off) */
for (; bi <= dword_len; bi++) {
buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
- IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ IXGBE_LE32_TO_CPUS((uintptr_t)&buffer[bi]);
}
rel_out:
/* Set the module link speed */
switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber:
ixgbe_set_rate_select_speed(hw,
IXGBE_LINK_SPEED_10GB_FULL);
/* Set the module link speed */
switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber:
ixgbe_set_rate_select_speed(hw,
IXGBE_LINK_SPEED_1GB_FULL);