-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox Technologies, Ltd
*/
#ifndef RTE_PMD_MLX5_DEFS_H_
#define RTE_PMD_MLX5_DEFS_H_
+#include <rte_ethdev_driver.h>
+
#include "mlx5_autoconf.h"
/* Reported driver name. */
#define MLX5_DRIVER_NAME "net_mlx5"
+/* Maximum number of simultaneous unicast MAC addresses. */
+#define MLX5_MAX_UC_MAC_ADDRESSES 128
+/* Maximum number of simultaneous Multicast MAC addresses. */
+#define MLX5_MAX_MC_MAC_ADDRESSES 128
/* Maximum number of simultaneous MAC addresses. */
-#define MLX5_MAX_MAC_ADDRESSES 128
+#define MLX5_MAX_MAC_ADDRESSES \
+ (MLX5_MAX_UC_MAC_ADDRESSES + MLX5_MAX_MC_MAC_ADDRESSES)
/* Maximum number of simultaneous VLAN filters. */
#define MLX5_MAX_VLAN_IDS 128
-/* Maximum number of special flows. */
-#define MLX5_MAX_SPECIAL_FLOWS 4
-
/*
* Request TX completion every time descriptors reach this threshold since
* the previous request. Must be a power of two for performance reasons.
*/
#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
-/*
- * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
- * from which buffers are to be transmitted will have to be mapped by this
- * driver to their own Memory Region (MR). This is a slow operation.
- *
- * This value is always 1 for RX queues.
- */
-#ifndef MLX5_PMD_TX_MP_CACHE
-#define MLX5_PMD_TX_MP_CACHE 8
-#endif
+/* Size of per-queue MR cache array for linear search. */
+#define MLX5_MR_CACHE_N 8
+
+/* Size of MR cache table for binary search. */
+#define MLX5_MR_BTREE_CACHE_N 256
/*
* If defined, only use software counters. The PMD will never ask the hardware
#define MLX5_MAX_XSTATS 32
/* Maximum Packet headers size (L2+L3+L4) for TSO. */
-#define MLX5_MAX_TSO_HEADER 128
+#define MLX5_MAX_TSO_HEADER 192
+
+/* Default minimum number of Tx queues for vectorized Tx. */
+#define MLX5_VPMD_MIN_TXQS 4
+
+/* Threshold of buffer replenishment for vectorized Rx. */
+#define MLX5_VPMD_RXQ_RPLNSH_THRESH 64U
+
+/* Maximum size of burst for vectorized Rx. */
+#define MLX5_VPMD_RX_MAX_BURST MLX5_VPMD_RXQ_RPLNSH_THRESH
+
+/*
+ * Maximum size of burst for vectorized Tx. This is related to the maximum size
+ * of Enhanced MPW (eMPW) WQE as vectorized Tx is supported with eMPW.
+ * Careful when changing, large value can cause WQE DS to overlap.
+ */
+#define MLX5_VPMD_TX_MAX_BURST 32U
+
+/* Number of packets vectorized Rx can simultaneously process in a loop. */
+#define MLX5_VPMD_DESCS_PER_LOOP 4
+
+/* Supported RSS */
+#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))
+
+/* Timeout in seconds to get a valid link status. */
+#define MLX5_LINK_STATUS_TIMEOUT 10
+
+/* Reserved address space for UAR mapping. */
+#define MLX5_UAR_SIZE (1ULL << 32)
+
+/* Offset of reserved UAR address space to hugepage memory. Offset is used here
+ * to minimize possibility of address next to hugepage being used by other code
+ * in either primary or secondary process, failing to map TX UAR would make TX
+ * packets invisible to HW.
+ */
+#define MLX5_UAR_OFFSET (1ULL << 32)
+
+/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_STRIDE_NUM_N 4U
+
+/* Two-byte shift is disabled for Multi-Packet RQ. */
+#define MLX5_MPRQ_TWO_BYTE_SHIFT 0
+
+/*
+ * Minimum size of packet to be memcpy'd instead of being attached as an
+ * external buffer.
+ */
+#define MLX5_MPRQ_MEMCPY_DEFAULT_LEN 128
+
+/* Minimum number Rx queues to enable Multi-Packet RQ. */
+#define MLX5_MPRQ_MIN_RXQS 12
+
+/* Cache size of mempool for Multi-Packet RQ. */
+#define MLX5_MPRQ_MP_CACHE_SZ 32
#endif /* RTE_PMD_MLX5_DEFS_H_ */
Code Review / deb_dpdk.git / blobdiff