#include <rte_flow.h>
#include <rte_malloc.h>
#include <rte_common.h>
+#include <rte_cycles.h>
#include "mlx5.h"
#include "mlx5_flow.h"
#define MLX5_VXLAN_PORT_MIN 30000
#define MLX5_VXLAN_PORT_MAX 60000
#define MLX5_VXLAN_DEVICE_PFX "vmlx_"
+/**
+ * Timeout in milliseconds to wait VXLAN UDP offloaded port
+ * registration completed within the mlx5 driver.
+ */
+#define MLX5_VXLAN_WAIT_PORT_REG_MS 250
/** Tunnel action type, used for @p type in header structure. */
enum flow_tcf_tunact_type {
unsigned int ifindex; /**< Own interface index. */
unsigned int ifouter; /**< Index of device attached to. */
uint16_t port;
- uint8_t created;
+ uint32_t created:1; /**< Actually created by PMD. */
+ uint32_t waitreg:1; /**< Wait for VXLAN UDP port registration. */
};
/** Tunnel descriptor header, common for all tunnel types. */
uint8_t src[IPV6_ADDR_LEN];
} ipv6;
};
-struct {
+ struct {
rte_be16_t src;
rte_be16_t dst;
} udp;
struct rte_flow_item_tcp tcp;
struct rte_flow_item_udp udp;
struct rte_flow_item_vxlan vxlan;
-} flow_tcf_mask_empty;
+} flow_tcf_mask_empty = {
+ {0},
+};
/** Supported masks for known item types. */
static const struct {
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
**/
static int
flow_tcf_validate_vxlan_encap_ipv6(const struct rte_flow_item *item,
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
**/
static int
flow_tcf_validate_vxlan_encap_udp(const struct rte_flow_item *item,
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
**/
static int
flow_tcf_validate_vxlan_encap_vni(const struct rte_flow_item *item,
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
**/
static int
flow_tcf_validate_vxlan_encap(const struct rte_flow_action *action,
}
/**
- * Validate RTE_FLOW_ITEM_TYPE_IPV4 item if VXLAN_DECAP action
- * is present in actions list.
- *
- * @param[in] ipv4
- * Outer IPv4 address item (if any, NULL otherwise).
- * @param[out] error
- * Pointer to the error structure.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
- **/
-static int
-flow_tcf_validate_vxlan_decap_ipv4(const struct rte_flow_item *ipv4,
- struct rte_flow_error *error)
-{
- const struct rte_flow_item_ipv4 *spec = ipv4->spec;
- const struct rte_flow_item_ipv4 *mask = ipv4->mask;
-
- if (!spec) {
- /*
- * Specification for IP addresses cannot be empty
- * because it is required as decap parameter.
- */
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, ipv4,
- "NULL outer ipv4 address"
- " specification for vxlan"
- " for vxlan decapsulation");
- }
- if (!mask)
- mask = &rte_flow_item_ipv4_mask;
- if (mask->hdr.dst_addr != RTE_BE32(0x00000000)) {
- if (mask->hdr.dst_addr != RTE_BE32(0xffffffff))
- return rte_flow_error_set
- (error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
- "no support for partial mask on"
- " \"ipv4.hdr.dst_addr\" field");
- /* More IP address validations can be put here. */
- } else {
- /*
- * Kernel uses the destination IP address
- * to determine the ingress network interface
- * for traffic being decapsulated.
- */
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, ipv4,
- "outer ipv4 destination address"
- " must be specified for"
- " vxlan decapsulation");
- }
- /* Source IP address is optional for decap. */
- if (mask->hdr.src_addr != RTE_BE32(0x00000000) &&
- mask->hdr.src_addr != RTE_BE32(0xffffffff))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
- "no support for partial mask on"
- " \"ipv4.hdr.src_addr\" field");
- return 0;
-}
-
-/**
- * Validate RTE_FLOW_ITEM_TYPE_IPV6 item if VXLAN_DECAP action
- * is present in actions list.
- *
- * @param[in] ipv6
- * Outer IPv6 address item (if any, NULL otherwise).
- * @param[out] error
- * Pointer to the error structure.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
- **/
-static int
-flow_tcf_validate_vxlan_decap_ipv6(const struct rte_flow_item *ipv6,
- struct rte_flow_error *error)
-{
- const struct rte_flow_item_ipv6 *spec = ipv6->spec;
- const struct rte_flow_item_ipv6 *mask = ipv6->mask;
-
- if (!spec) {
- /*
- * Specification for IP addresses cannot be empty
- * because it is required as decap parameter.
- */
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, ipv6,
- "NULL outer ipv6 address"
- " specification for vxlan"
- " decapsulation");
- }
- if (!mask)
- mask = &rte_flow_item_ipv6_mask;
- if (memcmp(&mask->hdr.dst_addr,
- &flow_tcf_mask_empty.ipv6.hdr.dst_addr,
- IPV6_ADDR_LEN)) {
- if (memcmp(&mask->hdr.dst_addr,
- &rte_flow_item_ipv6_mask.hdr.dst_addr,
- IPV6_ADDR_LEN))
- return rte_flow_error_set
- (error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
- "no support for partial mask on"
- " \"ipv6.hdr.dst_addr\" field");
- /* More IP address validations can be put here. */
- } else {
- /*
- * Kernel uses the destination IP address
- * to determine the ingress network interface
- * for traffic being decapsulated.
- */
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, ipv6,
- "outer ipv6 destination address must be "
- "specified for vxlan decapsulation");
- }
- /* Source IP address is optional for decap. */
- if (memcmp(&mask->hdr.src_addr,
- &flow_tcf_mask_empty.ipv6.hdr.src_addr,
- IPV6_ADDR_LEN)) {
- if (memcmp(&mask->hdr.src_addr,
- &rte_flow_item_ipv6_mask.hdr.src_addr,
- IPV6_ADDR_LEN))
- return rte_flow_error_set
- (error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
- "no support for partial mask on"
- " \"ipv6.hdr.src_addr\" field");
- }
- return 0;
-}
-
-/**
- * Validate RTE_FLOW_ITEM_TYPE_UDP item if VXLAN_DECAP action
- * is present in actions list.
+ * Validate outer RTE_FLOW_ITEM_TYPE_UDP item if tunnel item
+ * RTE_FLOW_ITEM_TYPE_VXLAN is present in item list.
*
* @param[in] udp
* Outer UDP layer item (if any, NULL otherwise).
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
**/
static int
flow_tcf_validate_vxlan_decap_udp(const struct rte_flow_item *udp,
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_tcf_validate(struct rte_eth_dev *dev,
const struct rte_flow_action_set_ipv4 *set_ipv4;
const struct rte_flow_action_set_ipv6 *set_ipv6;
} conf;
+ const struct rte_flow_item *outer_udp = NULL;
+ rte_be16_t inner_etype = RTE_BE16(ETH_P_ALL);
+ rte_be16_t outer_etype = RTE_BE16(ETH_P_ALL);
+ rte_be16_t vlan_etype = RTE_BE16(ETH_P_ALL);
uint64_t item_flags = 0;
uint64_t action_flags = 0;
- uint8_t next_protocol = -1;
+ uint8_t next_protocol = 0xff;
unsigned int tcm_ifindex = 0;
uint8_t pedit_validated = 0;
struct flow_tcf_ptoi ptoi[PTOI_TABLE_SZ_MAX(dev)];
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
unsigned int i;
- if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
- items->type != RTE_FLOW_ITEM_TYPE_ETH)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- items,
- "only L2 inner item"
- " is supported");
switch (items->type) {
case RTE_FLOW_ITEM_TYPE_VOID:
break;
case RTE_FLOW_ITEM_TYPE_PORT_ID:
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, items,
+ "inner tunnel port id"
+ " item is not supported");
mask.port_id = flow_tcf_item_mask
(items, &rte_flow_item_port_id_mask,
&flow_tcf_mask_supported.port_id,
if (ret < 0)
return ret;
item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
- MLX5_FLOW_LAYER_INNER_L2 :
- MLX5_FLOW_LAYER_OUTER_L2;
+ MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
/* TODO:
* Redundant check due to different supported mask.
* Same for the rest of items.
mask.eth,
"no support for partial mask on"
" \"type\" field");
+ assert(items->spec);
+ spec.eth = items->spec;
+ if (mask.eth->type &&
+ (item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+ inner_etype != RTE_BE16(ETH_P_ALL) &&
+ inner_etype != spec.eth->type)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "inner eth_type conflict");
+ if (mask.eth->type &&
+ !(item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+ outer_etype != RTE_BE16(ETH_P_ALL) &&
+ outer_etype != spec.eth->type)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "outer eth_type conflict");
+ if (mask.eth->type) {
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ inner_etype = spec.eth->type;
+ else
+ outer_etype = spec.eth->type;
+ }
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, items,
+ "inner tunnel VLAN"
+ " is not supported");
ret = mlx5_flow_validate_item_vlan(items, item_flags,
error);
if (ret < 0)
"no support for partial masks on"
" \"tci\" (PCP and VID parts) and"
" \"inner_type\" fields");
+ if (outer_etype != RTE_BE16(ETH_P_ALL) &&
+ outer_etype != RTE_BE16(ETH_P_8021Q))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "outer eth_type conflict,"
+ " must be 802.1Q");
+ outer_etype = RTE_BE16(ETH_P_8021Q);
+ assert(items->spec);
+ spec.vlan = items->spec;
+ if (mask.vlan->inner_type &&
+ vlan_etype != RTE_BE16(ETH_P_ALL) &&
+ vlan_etype != spec.vlan->inner_type)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "vlan eth_type conflict");
+ if (mask.vlan->inner_type)
+ vlan_etype = spec.vlan->inner_type;
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
ret = mlx5_flow_validate_item_ipv4(items, item_flags,
error);
if (ret < 0)
return ret;
- item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
mask.ipv4 = flow_tcf_item_mask
(items, &rte_flow_item_ipv4_mask,
&flow_tcf_mask_supported.ipv4,
next_protocol =
((const struct rte_flow_item_ipv4 *)
(items->spec))->hdr.next_proto_id;
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
- ret = flow_tcf_validate_vxlan_decap_ipv4
- (items, error);
- if (ret < 0)
- return ret;
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+ if (inner_etype != RTE_BE16(ETH_P_ALL) &&
+ inner_etype != RTE_BE16(ETH_P_IP))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "inner eth_type conflict,"
+ " IPv4 is required");
+ inner_etype = RTE_BE16(ETH_P_IP);
+ } else if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN) {
+ if (vlan_etype != RTE_BE16(ETH_P_ALL) &&
+ vlan_etype != RTE_BE16(ETH_P_IP))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "vlan eth_type conflict,"
+ " IPv4 is required");
+ vlan_etype = RTE_BE16(ETH_P_IP);
+ } else {
+ if (outer_etype != RTE_BE16(ETH_P_ALL) &&
+ outer_etype != RTE_BE16(ETH_P_IP))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "eth_type conflict,"
+ " IPv4 is required");
+ outer_etype = RTE_BE16(ETH_P_IP);
}
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
error);
if (ret < 0)
return ret;
- item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
mask.ipv6 = flow_tcf_item_mask
(items, &rte_flow_item_ipv6_mask,
&flow_tcf_mask_supported.ipv6,
next_protocol =
((const struct rte_flow_item_ipv6 *)
(items->spec))->hdr.proto;
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
- ret = flow_tcf_validate_vxlan_decap_ipv6
- (items, error);
- if (ret < 0)
- return ret;
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+ if (inner_etype != RTE_BE16(ETH_P_ALL) &&
+ inner_etype != RTE_BE16(ETH_P_IPV6))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "inner eth_type conflict,"
+ " IPv6 is required");
+ inner_etype = RTE_BE16(ETH_P_IPV6);
+ } else if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN) {
+ if (vlan_etype != RTE_BE16(ETH_P_ALL) &&
+ vlan_etype != RTE_BE16(ETH_P_IPV6))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "vlan eth_type conflict,"
+ " IPv6 is required");
+ vlan_etype = RTE_BE16(ETH_P_IPV6);
+ } else {
+ if (outer_etype != RTE_BE16(ETH_P_ALL) &&
+ outer_etype != RTE_BE16(ETH_P_IPV6))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "eth_type conflict,"
+ " IPv6 is required");
+ outer_etype = RTE_BE16(ETH_P_IPV6);
}
break;
case RTE_FLOW_ITEM_TYPE_UDP:
next_protocol, error);
if (ret < 0)
return ret;
- item_flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
mask.udp = flow_tcf_item_mask
(items, &rte_flow_item_udp_mask,
&flow_tcf_mask_supported.udp,
error);
if (!mask.udp)
return -rte_errno;
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
- ret = flow_tcf_validate_vxlan_decap_udp
- (items, error);
- if (ret < 0)
- return ret;
- }
+ /*
+ * Save the presumed outer UDP item for extra check
+ * if the tunnel item will be found later in the list.
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_TUNNEL))
+ outer_udp = items;
break;
case RTE_FLOW_ITEM_TYPE_TCP:
ret = mlx5_flow_validate_item_tcp
error);
if (ret < 0)
return ret;
- item_flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
mask.tcp = flow_tcf_item_mask
(items, &rte_flow_item_tcp_mask,
&flow_tcf_mask_supported.tcp,
return -rte_errno;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
- if (!(action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP))
+ if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN)
return rte_flow_error_set
(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- items,
- "vni pattern should be followed by"
- " vxlan decapsulation action");
+ RTE_FLOW_ERROR_TYPE_ITEM, items,
+ "vxlan tunnel over vlan"
+ " is not supported");
ret = mlx5_flow_validate_item_vxlan(items,
item_flags, error);
if (ret < 0)
mask.vxlan,
"no support for partial or "
"empty mask on \"vxlan.vni\" field");
+ /*
+ * The VNI item assumes the VXLAN tunnel, it requires
+ * at least the outer destination UDP port must be
+ * specified without wildcards to allow kernel select
+ * the virtual VXLAN device by port. Also outer IPv4
+ * or IPv6 item must be specified (wilcards or even
+ * zero mask are allowed) to let driver know the tunnel
+ * IP version and process UDP traffic correctly.
+ */
+ if (!(item_flags &
+ (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no outer IP pattern found"
+ " for vxlan tunnel");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no outer UDP pattern found"
+ " for vxlan tunnel");
+ /*
+ * All items preceding the tunnel item become outer
+ * ones and we should do extra validation for them
+ * due to tc limitations for tunnel outer parameters.
+ * Currently only outer UDP item requres extra check,
+ * use the saved pointer instead of item list rescan.
+ */
+ assert(outer_udp);
+ ret = flow_tcf_validate_vxlan_decap_udp
+ (outer_udp, error);
+ if (ret < 0)
+ return ret;
+ /* Reset L4 protocol for inner parameters. */
+ next_protocol = 0xff;
break;
default:
return rte_flow_error_set(error, ENOTSUP,
*/
if ((action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN) &&
(action_flags & MLX5_FLOW_ACTION_PORT_ID) &&
- ((struct priv *)port_id_dev->data->dev_private)->representor)
+ ((struct mlx5_priv *)port_id_dev->data->dev_private)->representor)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, actions,
"vlan push can only be applied"
"no ethernet found in"
" pattern");
}
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
- if (!(item_flags &
- (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
- MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- NULL,
- "no outer IP pattern found"
- " for vxlan decap action");
- if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- NULL,
- "no outer UDP pattern found"
- " for vxlan decap action");
- if (!(item_flags & MLX5_FLOW_LAYER_VXLAN))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- NULL,
- "no VNI pattern found"
- " for vxlan decap action");
- }
+ if ((action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) &&
+ !(item_flags & MLX5_FLOW_LAYER_VXLAN))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no VNI pattern found"
+ " for vxlan decap action");
+ if ((action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP) &&
+ (item_flags & MLX5_FLOW_LAYER_TUNNEL))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "vxlan encap not supported"
+ " for tunneled traffic");
return 0;
}
* Pointer to the flow attributes.
* @param[in] items
* Pointer to the list of items.
+ * @param[out] action_flags
+ * Pointer to the detected actions.
*
* @return
* Maximum size of memory for items.
*/
static int
flow_tcf_get_items_size(const struct rte_flow_attr *attr,
- const struct rte_flow_item items[])
+ const struct rte_flow_item items[],
+ uint64_t *action_flags)
{
int size = 0;
size += SZ_NLATTR_STRZ_OF("flower") +
+ SZ_NLATTR_TYPE_OF(uint16_t) + /* Outer ether type. */
SZ_NLATTR_NEST + /* TCA_OPTIONS. */
SZ_NLATTR_TYPE_OF(uint32_t); /* TCA_CLS_FLAGS_SKIP_SW. */
if (attr->group > 0)
case RTE_FLOW_ITEM_TYPE_PORT_ID:
break;
case RTE_FLOW_ITEM_TYPE_ETH:
- size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
- SZ_NLATTR_DATA_OF(ETHER_ADDR_LEN) * 4;
+ size += SZ_NLATTR_DATA_OF(ETHER_ADDR_LEN) * 4;
/* dst/src MAC addr and mask. */
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
- size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
- SZ_NLATTR_TYPE_OF(uint16_t) +
+ size += SZ_NLATTR_TYPE_OF(uint16_t) +
/* VLAN Ether type. */
SZ_NLATTR_TYPE_OF(uint8_t) + /* VLAN prio. */
SZ_NLATTR_TYPE_OF(uint16_t); /* VLAN ID. */
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
- size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
- SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
+ size += SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
SZ_NLATTR_TYPE_OF(uint32_t) * 4;
/* dst/src IP addr and mask. */
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
- size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
- SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
+ size += SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
SZ_NLATTR_DATA_OF(IPV6_ADDR_LEN) * 4;
/* dst/src IP addr and mask. */
break;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
size += SZ_NLATTR_TYPE_OF(uint32_t);
+ /*
+ * There might be no VXLAN decap action in the action
+ * list, nonetheless the VXLAN tunnel flow requires
+ * the decap structure to be correctly applied to
+ * VXLAN device, set the flag to create the structure.
+ * Translation routine will not put the decap action
+ * in tne Netlink message if there is no actual action
+ * in the list.
+ */
+ *action_flags |= MLX5_FLOW_ACTION_VXLAN_DECAP;
break;
default:
DRV_LOG(WARNING,
uint64_t *action_flags)
{
int size = 0;
- uint64_t flags = 0;
+ uint64_t flags = *action_flags;
size += SZ_NLATTR_NEST; /* TCA_FLOWER_ACT. */
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
return size;
}
-/**
- * Brand rtnetlink buffer with unique handle.
- *
- * This handle should be unique for a given network interface to avoid
- * collisions.
- *
- * @param nlh
- * Pointer to Netlink message.
- * @param handle
- * Unique 32-bit handle to use.
- */
-static void
-flow_tcf_nl_brand(struct nlmsghdr *nlh, uint32_t handle)
-{
- struct tcmsg *tcm = mnl_nlmsg_get_payload(nlh);
-
- tcm->tcm_handle = handle;
- DRV_LOG(DEBUG, "Netlink msg %p is branded with handle %x",
- (void *)nlh, handle);
-}
-
/**
* Prepare a flow object for Linux TC flower. It calculates the maximum size of
* memory required, allocates the memory, initializes Netlink message headers
*
* @return
* Pointer to mlx5_flow object on success,
- * otherwise NULL and rte_ernno is set.
+ * otherwise NULL and rte_errno is set.
*/
static struct mlx5_flow *
flow_tcf_prepare(const struct rte_flow_attr *attr,
struct tcmsg *tcm;
uint8_t *sp, *tun = NULL;
- size += flow_tcf_get_items_size(attr, items);
+ size += flow_tcf_get_items_size(attr, items, &action_flags);
size += flow_tcf_get_actions_and_size(actions, &action_flags);
dev_flow = rte_zmalloc(__func__, size, MNL_ALIGNTO);
if (!dev_flow) {
dev_flow->tcf.tunnel->type = FLOW_TCF_TUNACT_VXLAN_DECAP;
else if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
dev_flow->tcf.tunnel->type = FLOW_TCF_TUNACT_VXLAN_ENCAP;
- /*
- * Generate a reasonably unique handle based on the address of the
- * target buffer.
- *
- * This is straightforward on 32-bit systems where the flow pointer can
- * be used directly. Otherwise, its least significant part is taken
- * after shifting it by the previous power of two of the pointed buffer
- * size.
- */
- if (sizeof(dev_flow) <= 4)
- flow_tcf_nl_brand(nlh, (uintptr_t)dev_flow);
- else
- flow_tcf_nl_brand(nlh, (uintptr_t)dev_flow >>
- rte_log2_u32(rte_align32prevpow2(size)));
return dev_flow;
}
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
struct nlmsghdr *nlh = dev_flow->tcf.nlh;
struct tcmsg *tcm = dev_flow->tcf.tcm;
uint32_t na_act_index_cur;
- bool eth_type_set = 0;
- bool vlan_present = 0;
- bool vlan_eth_type_set = 0;
+ rte_be16_t inner_etype = RTE_BE16(ETH_P_ALL);
+ rte_be16_t outer_etype = RTE_BE16(ETH_P_ALL);
+ rte_be16_t vlan_etype = RTE_BE16(ETH_P_ALL);
bool ip_proto_set = 0;
+ bool tunnel_outer = 0;
struct nlattr *na_flower;
struct nlattr *na_flower_act;
struct nlattr *na_vlan_id = NULL;
switch (dev_flow->tcf.tunnel->type) {
case FLOW_TCF_TUNACT_VXLAN_DECAP:
decap.vxlan = dev_flow->tcf.vxlan_decap;
+ tunnel_outer = 1;
break;
case FLOW_TCF_TUNACT_VXLAN_ENCAP:
encap.vxlan = dev_flow->tcf.vxlan_encap;
* Priority cannot be zero to prevent the kernel from picking one
* automatically.
*/
- tcm->tcm_info = TC_H_MAKE((attr->priority + 1) << 16,
- RTE_BE16(ETH_P_ALL));
+ tcm->tcm_info = TC_H_MAKE((attr->priority + 1) << 16, outer_etype);
if (attr->group > 0)
mnl_attr_put_u32(nlh, TCA_CHAIN, attr->group);
mnl_attr_put_strz(nlh, TCA_KIND, "flower");
tcm->tcm_ifindex = ptoi[i].ifindex;
break;
case RTE_FLOW_ITEM_TYPE_ETH:
- item_flags |= (item_flags & MLX5_FLOW_LAYER_VXLAN) ?
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
MLX5_FLOW_LAYER_INNER_L2 :
MLX5_FLOW_LAYER_OUTER_L2;
mask.eth = flow_tcf_item_mask
if (mask.eth == &flow_tcf_mask_empty.eth)
break;
spec.eth = items->spec;
- if (decap.vxlan &&
- !(item_flags & MLX5_FLOW_LAYER_VXLAN)) {
+ if (mask.eth->type) {
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ inner_etype = spec.eth->type;
+ else
+ outer_etype = spec.eth->type;
+ }
+ if (tunnel_outer) {
DRV_LOG(WARNING,
- "outer L2 addresses cannot be forced"
- " for vxlan decapsulation, parameter"
- " ignored");
+ "outer L2 addresses cannot be"
+ " forced is outer ones for tunnel,"
+ " parameter is ignored");
break;
}
- if (mask.eth->type) {
- mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_ETH_TYPE,
- spec.eth->type);
- eth_type_set = 1;
- }
if (!is_zero_ether_addr(&mask.eth->dst)) {
mnl_attr_put(nlh, TCA_FLOWER_KEY_ETH_DST,
ETHER_ADDR_LEN,
case RTE_FLOW_ITEM_TYPE_VLAN:
assert(!encap.hdr);
assert(!decap.hdr);
+ assert(!tunnel_outer);
item_flags |= MLX5_FLOW_LAYER_OUTER_VLAN;
mask.vlan = flow_tcf_item_mask
(items, &rte_flow_item_vlan_mask,
sizeof(flow_tcf_mask_supported.vlan),
error);
assert(mask.vlan);
- if (!eth_type_set)
- mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_ETH_TYPE,
- RTE_BE16(ETH_P_8021Q));
- eth_type_set = 1;
- vlan_present = 1;
if (mask.vlan == &flow_tcf_mask_empty.vlan)
break;
spec.vlan = items->spec;
- if (mask.vlan->inner_type) {
- mnl_attr_put_u16(nlh,
- TCA_FLOWER_KEY_VLAN_ETH_TYPE,
- spec.vlan->inner_type);
- vlan_eth_type_set = 1;
- }
+ assert(outer_etype == RTE_BE16(ETH_P_ALL) ||
+ outer_etype == RTE_BE16(ETH_P_8021Q));
+ outer_etype = RTE_BE16(ETH_P_8021Q);
+ if (mask.vlan->inner_type)
+ vlan_etype = spec.vlan->inner_type;
if (mask.vlan->tci & RTE_BE16(0xe000))
mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_VLAN_PRIO,
(rte_be_to_cpu_16
assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
- item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
mask.ipv4 = flow_tcf_item_mask
(items, &rte_flow_item_ipv4_mask,
&flow_tcf_mask_supported.ipv4,
sizeof(flow_tcf_mask_supported.ipv4),
error);
assert(mask.ipv4);
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+ assert(inner_etype == RTE_BE16(ETH_P_ALL) ||
+ inner_etype == RTE_BE16(ETH_P_IP));
+ inner_etype = RTE_BE16(ETH_P_IP);
+ } else if (outer_etype == RTE_BE16(ETH_P_8021Q)) {
+ assert(vlan_etype == RTE_BE16(ETH_P_ALL) ||
+ vlan_etype == RTE_BE16(ETH_P_IP));
+ vlan_etype = RTE_BE16(ETH_P_IP);
+ } else {
+ assert(outer_etype == RTE_BE16(ETH_P_ALL) ||
+ outer_etype == RTE_BE16(ETH_P_IP));
+ outer_etype = RTE_BE16(ETH_P_IP);
+ }
spec.ipv4 = items->spec;
- if (!decap.vxlan) {
- if (!eth_type_set ||
- (!vlan_eth_type_set && vlan_present))
- mnl_attr_put_u16
- (nlh,
- vlan_present ?
- TCA_FLOWER_KEY_VLAN_ETH_TYPE :
- TCA_FLOWER_KEY_ETH_TYPE,
- RTE_BE16(ETH_P_IP));
- eth_type_set = 1;
- vlan_eth_type_set = 1;
- if (mask.ipv4 == &flow_tcf_mask_empty.ipv4)
+ if (!tunnel_outer && mask.ipv4->hdr.next_proto_id) {
+ /*
+ * No way to set IP protocol for outer tunnel
+ * layers. Usually it is fixed, for example,
+ * to UDP for VXLAN/GPE.
+ */
+ assert(spec.ipv4); /* Mask is not empty. */
+ mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_IP_PROTO,
+ spec.ipv4->hdr.next_proto_id);
+ ip_proto_set = 1;
+ }
+ if (mask.ipv4 == &flow_tcf_mask_empty.ipv4 ||
+ (!mask.ipv4->hdr.src_addr &&
+ !mask.ipv4->hdr.dst_addr)) {
+ if (!tunnel_outer)
break;
- if (mask.ipv4->hdr.next_proto_id) {
- mnl_attr_put_u8
- (nlh, TCA_FLOWER_KEY_IP_PROTO,
- spec.ipv4->hdr.next_proto_id);
- ip_proto_set = 1;
- }
- } else {
- assert(mask.ipv4 != &flow_tcf_mask_empty.ipv4);
+ /*
+ * For tunnel outer we must set outer IP key
+ * anyway, even if the specification/mask is
+ * empty. There is no another way to tell
+ * kernel about he outer layer protocol.
+ */
+ mnl_attr_put_u32
+ (nlh, TCA_FLOWER_KEY_ENC_IPV4_SRC,
+ mask.ipv4->hdr.src_addr);
+ mnl_attr_put_u32
+ (nlh, TCA_FLOWER_KEY_ENC_IPV4_SRC_MASK,
+ mask.ipv4->hdr.src_addr);
+ assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
+ break;
}
if (mask.ipv4->hdr.src_addr) {
mnl_attr_put_u32
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV4_SRC :
TCA_FLOWER_KEY_IPV4_SRC,
spec.ipv4->hdr.src_addr);
mnl_attr_put_u32
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV4_SRC_MASK :
TCA_FLOWER_KEY_IPV4_SRC_MASK,
mask.ipv4->hdr.src_addr);
}
if (mask.ipv4->hdr.dst_addr) {
mnl_attr_put_u32
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV4_DST :
TCA_FLOWER_KEY_IPV4_DST,
spec.ipv4->hdr.dst_addr);
mnl_attr_put_u32
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV4_DST_MASK :
TCA_FLOWER_KEY_IPV4_DST_MASK,
mask.ipv4->hdr.dst_addr);
}
assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
break;
- case RTE_FLOW_ITEM_TYPE_IPV6:
- item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ case RTE_FLOW_ITEM_TYPE_IPV6: {
+ bool ipv6_src, ipv6_dst;
+
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
mask.ipv6 = flow_tcf_item_mask
(items, &rte_flow_item_ipv6_mask,
&flow_tcf_mask_supported.ipv6,
sizeof(flow_tcf_mask_supported.ipv6),
error);
assert(mask.ipv6);
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+ assert(inner_etype == RTE_BE16(ETH_P_ALL) ||
+ inner_etype == RTE_BE16(ETH_P_IPV6));
+ inner_etype = RTE_BE16(ETH_P_IPV6);
+ } else if (outer_etype == RTE_BE16(ETH_P_8021Q)) {
+ assert(vlan_etype == RTE_BE16(ETH_P_ALL) ||
+ vlan_etype == RTE_BE16(ETH_P_IPV6));
+ vlan_etype = RTE_BE16(ETH_P_IPV6);
+ } else {
+ assert(outer_etype == RTE_BE16(ETH_P_ALL) ||
+ outer_etype == RTE_BE16(ETH_P_IPV6));
+ outer_etype = RTE_BE16(ETH_P_IPV6);
+ }
spec.ipv6 = items->spec;
- if (!decap.vxlan) {
- if (!eth_type_set ||
- (!vlan_eth_type_set && vlan_present))
- mnl_attr_put_u16
- (nlh,
- vlan_present ?
- TCA_FLOWER_KEY_VLAN_ETH_TYPE :
- TCA_FLOWER_KEY_ETH_TYPE,
- RTE_BE16(ETH_P_IPV6));
- eth_type_set = 1;
- vlan_eth_type_set = 1;
- if (mask.ipv6 == &flow_tcf_mask_empty.ipv6)
+ if (!tunnel_outer && mask.ipv6->hdr.proto) {
+ /*
+ * No way to set IP protocol for outer tunnel
+ * layers. Usually it is fixed, for example,
+ * to UDP for VXLAN/GPE.
+ */
+ assert(spec.ipv6); /* Mask is not empty. */
+ mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_IP_PROTO,
+ spec.ipv6->hdr.proto);
+ ip_proto_set = 1;
+ }
+ ipv6_dst = !IN6_IS_ADDR_UNSPECIFIED
+ (mask.ipv6->hdr.dst_addr);
+ ipv6_src = !IN6_IS_ADDR_UNSPECIFIED
+ (mask.ipv6->hdr.src_addr);
+ if (mask.ipv6 == &flow_tcf_mask_empty.ipv6 ||
+ (!ipv6_dst && !ipv6_src)) {
+ if (!tunnel_outer)
break;
- if (mask.ipv6->hdr.proto) {
- mnl_attr_put_u8
- (nlh, TCA_FLOWER_KEY_IP_PROTO,
- spec.ipv6->hdr.proto);
- ip_proto_set = 1;
- }
- } else {
- assert(mask.ipv6 != &flow_tcf_mask_empty.ipv6);
+ /*
+ * For tunnel outer we must set outer IP key
+ * anyway, even if the specification/mask is
+ * empty. There is no another way to tell
+ * kernel about he outer layer protocol.
+ */
+ mnl_attr_put(nlh,
+ TCA_FLOWER_KEY_ENC_IPV6_SRC,
+ IPV6_ADDR_LEN,
+ mask.ipv6->hdr.src_addr);
+ mnl_attr_put(nlh,
+ TCA_FLOWER_KEY_ENC_IPV6_SRC_MASK,
+ IPV6_ADDR_LEN,
+ mask.ipv6->hdr.src_addr);
+ assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
+ break;
}
- if (!IN6_IS_ADDR_UNSPECIFIED(mask.ipv6->hdr.src_addr)) {
- mnl_attr_put(nlh, decap.vxlan ?
+ if (ipv6_src) {
+ mnl_attr_put(nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV6_SRC :
TCA_FLOWER_KEY_IPV6_SRC,
IPV6_ADDR_LEN,
spec.ipv6->hdr.src_addr);
- mnl_attr_put(nlh, decap.vxlan ?
+ mnl_attr_put(nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV6_SRC_MASK :
TCA_FLOWER_KEY_IPV6_SRC_MASK,
IPV6_ADDR_LEN,
mask.ipv6->hdr.src_addr);
}
- if (!IN6_IS_ADDR_UNSPECIFIED(mask.ipv6->hdr.dst_addr)) {
- mnl_attr_put(nlh, decap.vxlan ?
+ if (ipv6_dst) {
+ mnl_attr_put(nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV6_DST :
TCA_FLOWER_KEY_IPV6_DST,
IPV6_ADDR_LEN,
spec.ipv6->hdr.dst_addr);
- mnl_attr_put(nlh, decap.vxlan ?
+ mnl_attr_put(nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_IPV6_DST_MASK :
TCA_FLOWER_KEY_IPV6_DST_MASK,
IPV6_ADDR_LEN,
}
assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
break;
+ }
case RTE_FLOW_ITEM_TYPE_UDP:
- item_flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
mask.udp = flow_tcf_item_mask
(items, &rte_flow_item_udp_mask,
&flow_tcf_mask_supported.udp,
error);
assert(mask.udp);
spec.udp = items->spec;
- if (!decap.vxlan) {
+ if (!tunnel_outer) {
if (!ip_proto_set)
mnl_attr_put_u8
(nlh, TCA_FLOWER_KEY_IP_PROTO,
}
if (mask.udp->hdr.src_port) {
mnl_attr_put_u16
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_UDP_SRC_PORT :
TCA_FLOWER_KEY_UDP_SRC,
spec.udp->hdr.src_port);
mnl_attr_put_u16
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_UDP_SRC_PORT_MASK :
TCA_FLOWER_KEY_UDP_SRC_MASK,
mask.udp->hdr.src_port);
}
if (mask.udp->hdr.dst_port) {
mnl_attr_put_u16
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_UDP_DST_PORT :
TCA_FLOWER_KEY_UDP_DST,
spec.udp->hdr.dst_port);
mnl_attr_put_u16
- (nlh, decap.vxlan ?
+ (nlh, tunnel_outer ?
TCA_FLOWER_KEY_ENC_UDP_DST_PORT_MASK :
TCA_FLOWER_KEY_UDP_DST_MASK,
mask.udp->hdr.dst_port);
assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
break;
case RTE_FLOW_ITEM_TYPE_TCP:
- item_flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
mask.tcp = flow_tcf_item_mask
(items, &rte_flow_item_tcp_mask,
&flow_tcf_mask_supported.tcp,
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
assert(decap.vxlan);
+ tunnel_outer = 0;
item_flags |= MLX5_FLOW_LAYER_VXLAN;
spec.vxlan = items->spec;
mnl_attr_put_u32(nlh,
NULL, "item not supported");
}
}
+ /*
+ * Set the ether_type flower key and tc rule protocol:
+ * - if there is nor VLAN neither VXLAN the key is taken from
+ * eth item directly or deduced from L3 items.
+ * - if there is vlan item then key is fixed to 802.1q.
+ * - if there is vxlan item then key is set to inner tunnel type.
+ * - simultaneous vlan and vxlan items are prohibited.
+ */
+ if (outer_etype != RTE_BE16(ETH_P_ALL)) {
+ tcm->tcm_info = TC_H_MAKE((attr->priority + 1) << 16,
+ outer_etype);
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+ if (inner_etype != RTE_BE16(ETH_P_ALL))
+ mnl_attr_put_u16(nlh,
+ TCA_FLOWER_KEY_ETH_TYPE,
+ inner_etype);
+ } else {
+ mnl_attr_put_u16(nlh,
+ TCA_FLOWER_KEY_ETH_TYPE,
+ outer_etype);
+ if (outer_etype == RTE_BE16(ETH_P_8021Q) &&
+ vlan_etype != RTE_BE16(ETH_P_ALL))
+ mnl_attr_put_u16(nlh,
+ TCA_FLOWER_KEY_VLAN_ETH_TYPE,
+ vlan_etype);
+ }
+ assert(dev_flow->tcf.nlsize >= nlh->nlmsg_len);
+ }
na_flower_act = mnl_attr_nest_start(nlh, TCA_FLOWER_ACT);
na_act_index_cur = 1;
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
mnl_attr_get_payload
(mnl_nlmsg_get_payload_tail
(nlh)))->ifindex;
+ } else if (decap.hdr) {
+ assert(dev_flow->tcf.tunnel);
+ dev_flow->tcf.tunnel->ifindex_ptr =
+ (unsigned int *)&tcm->tcm_ifindex;
}
mnl_attr_put(nlh, TCA_MIRRED_PARMS,
sizeof(struct tc_mirred),
/**
* Cleanup the outer interface. Removes all found vxlan devices
- * attached to specified index, flushes the meigh and local IP
- * datavase.
+ * attached to specified index, flushes the neigh and local IP
+ * database.
*
* @param[in] tcf
* Context object initialized by mlx5_flow_tcf_context_create().
* when we do not need it anymore.
*/
vtep->created = 1;
+ vtep->waitreg = 1;
}
/* Try to get ifindex of created of pre-existing device. */
ret = if_nametoindex(name);
static void
flow_tcf_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_tcf_context *ctx = priv->tcf_context;
struct mlx5_flow *dev_flow;
struct nlmsghdr *nlh;
+ struct tcmsg *tcm;
if (!flow)
return;
dev_flow);
dev_flow->tcf.tunnel->vtep = NULL;
}
+ /* Cleanup the rule handle value. */
+ tcm = mnl_nlmsg_get_payload(nlh);
+ tcm->tcm_handle = 0;
dev_flow->tcf.applied = 0;
}
}
+/**
+ * Fetch the applied rule handle. This is callback routine called by
+ * libmnl mnl_cb_run() in loop for every message in received packet.
+ * When the NLM_F_ECHO flag i sspecified the kernel sends the created
+ * rule descriptor back to the application and we can retrieve the
+ * actual rule handle from updated descriptor.
+ *
+ * @param[in] nlh
+ * Pointer to reply header.
+ * @param[in, out] arg
+ * Context pointer for this callback.
+ *
+ * @return
+ * A positive, nonzero value on success (required by libmnl
+ * to continue messages processing).
+ */
+static int
+flow_tcf_collect_apply_cb(const struct nlmsghdr *nlh, void *arg)
+{
+ struct nlmsghdr *nlhrq = arg;
+ struct tcmsg *tcmrq = mnl_nlmsg_get_payload(nlhrq);
+ struct tcmsg *tcm = mnl_nlmsg_get_payload(nlh);
+ struct nlattr *na;
+
+ if (nlh->nlmsg_type != RTM_NEWTFILTER ||
+ nlh->nlmsg_seq != nlhrq->nlmsg_seq)
+ return 1;
+ mnl_attr_for_each(na, nlh, sizeof(*tcm)) {
+ switch (mnl_attr_get_type(na)) {
+ case TCA_KIND:
+ if (strcmp(mnl_attr_get_payload(na), "flower")) {
+ /* Not flower filter, drop entire message. */
+ return 1;
+ }
+ tcmrq->tcm_handle = tcm->tcm_handle;
+ return 1;
+ }
+ }
+ return 1;
+}
/**
* Apply flow to E-Switch by sending Netlink message.
*
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_tcf_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_tcf_context *ctx = priv->tcf_context;
struct mlx5_flow *dev_flow;
struct nlmsghdr *nlh;
+ struct tcmsg *tcm;
+ uint64_t start = 0;
+ uint64_t twait = 0;
+ int ret;
dev_flow = LIST_FIRST(&flow->dev_flows);
/* E-Switch flow can't be expanded. */
return 0;
nlh = dev_flow->tcf.nlh;
nlh->nlmsg_type = RTM_NEWTFILTER;
- nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL;
+ nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE |
+ NLM_F_EXCL | NLM_F_ECHO;
+ tcm = mnl_nlmsg_get_payload(nlh);
+ /* Allow kernel to assign handle on its own. */
+ tcm->tcm_handle = 0;
if (dev_flow->tcf.tunnel) {
/*
* Replace the interface index, target for
dev_flow->tcf.tunnel->ifindex_org);
*dev_flow->tcf.tunnel->ifindex_ptr =
dev_flow->tcf.tunnel->vtep->ifindex;
+ if (dev_flow->tcf.tunnel->vtep->waitreg) {
+ /* Clear wait flag for VXLAN port registration. */
+ dev_flow->tcf.tunnel->vtep->waitreg = 0;
+ twait = rte_get_timer_hz();
+ assert(twait > MS_PER_S);
+ twait = twait * MLX5_VXLAN_WAIT_PORT_REG_MS;
+ twait = twait / MS_PER_S;
+ start = rte_get_timer_cycles();
+ }
}
- if (!flow_tcf_nl_ack(ctx, nlh, NULL, NULL)) {
+ /*
+ * Kernel creates the VXLAN devices and registers UDP ports to
+ * be hardware offloaded within the NIC kernel drivers. The
+ * registration process is being performed into context of
+ * working kernel thread and the race conditions might happen.
+ * The VXLAN device is created and success is returned to
+ * calling application, but the UDP port registration process
+ * is not completed yet. The next applied rule may be rejected
+ * by the driver with ENOSUP code. We are going to wait a bit,
+ * allowing registration process to be completed. The waiting
+ * is performed once after device been created.
+ */
+ do {
+ struct timespec onems;
+
+ ret = flow_tcf_nl_ack(ctx, nlh,
+ flow_tcf_collect_apply_cb, nlh);
+ if (!ret || ret != -ENOTSUP || !twait)
+ break;
+ /* Wait one millisecond and try again till timeout. */
+ onems.tv_sec = 0;
+ onems.tv_nsec = NS_PER_S / MS_PER_S;
+ nanosleep(&onems, 0);
+ if ((rte_get_timer_cycles() - start) > twait) {
+ /* Timeout elapsed, try once more and exit. */
+ twait = 0;
+ }
+ } while (true);
+ if (!ret) {
+ if (!tcm->tcm_handle) {
+ flow_tcf_remove(dev, flow);
+ return rte_flow_error_set
+ (error, ENOENT,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "netlink: rule zero handle returned");
+ }
dev_flow->tcf.applied = 1;
if (*dev_flow->tcf.ptc_flags & TCA_CLS_FLAGS_SKIP_SW)
return 0;
{
struct flow_tcf_stats_basic sb_data;
struct rte_flow_query_count *qc = data;
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_tcf_context *ctx = priv->tcf_context;
struct mnl_socket *nl = ctx->nl;
struct mlx5_flow *dev_flow;
Code Review / deb_dpdk.git / blobdiff