-/*
- * Copyright (c) 2016 QLogic Corporation.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2016 - 2018 Cavium Inc.
* All rights reserved.
- * www.qlogic.com
- *
- * See LICENSE.qede_pmd for copyright and licensing details.
+ * www.cavium.com
*/
#ifndef _INIT_FW_FUNCS_H
#define _INIT_FW_FUNCS_H
-/* forward declarations */
+/* Forward declarations */
+
struct init_qm_pq_params;
+
/**
- * @brief ecore_qm_pf_mem_size - prepare QM ILT sizes
+ * @brief ecore_qm_pf_mem_size - Prepare QM ILT sizes
*
* Returns the required host memory size in 4KB units.
* Must be called before all QM init HSI functions.
*
- * @param pf_id - physical function ID
- * @param num_pf_cids - number of connections used by this PF
- * @param num_vf_cids - number of connections used by VFs of this PF
- * @param num_tids - number of tasks used by this PF
- * @param num_pf_pqs - number of PQs used by this PF
- * @param num_vf_pqs - number of PQs used by VFs of this PF
+ * @param num_pf_cids - number of connections used by this PF
+ * @param num_vf_cids - number of connections used by VFs of this PF
+ * @param num_tids - number of tasks used by this PF
+ * @param num_pf_pqs - number of PQs used by this PF
+ * @param num_vf_pqs - number of PQs used by VFs of this PF
*
* @return The required host memory size in 4KB units.
*/
-u32 ecore_qm_pf_mem_size(u8 pf_id,
- u32 num_pf_cids,
+u32 ecore_qm_pf_mem_size(u32 num_pf_cids,
u32 num_vf_cids,
u32 num_tids,
u16 num_pf_pqs,
u16 num_vf_pqs);
+
/**
* @brief ecore_qm_common_rt_init - Prepare QM runtime init values for engine
* phase
* @param p_hwfn
* @param max_ports_per_engine - max number of ports per engine in HW
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
- * @param pf_rl_en - enable per-PF rate limiters
- * @param pf_wfq_en - enable per-PF WFQ
- * @param vport_rl_en - enable per-VPORT rate limiters
- * @param vport_wfq_en - enable per-VPORT WFQ
+ * @param pf_rl_en - enable per-PF rate limiters
+ * @param pf_wfq_en - enable per-PF WFQ
+ * @param vport_rl_en - enable per-VPORT rate limiters
+ * @param vport_wfq_en - enable per-VPORT WFQ
* @param port_params - array of size MAX_NUM_PORTS with params for each port
*
* @return 0 on success, -1 on error.
bool vport_rl_en,
bool vport_wfq_en,
struct init_qm_port_params port_params[MAX_NUM_PORTS]);
+
/**
* @brief ecore_qm_pf_rt_init Prepare QM runtime init values for the PF phase
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
- * @param port_id - port ID
- * @param pf_id - PF ID
+ * @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
- * @param is_first_pf - 1 = first PF in engine, 0 = othwerwise
- * @param num_pf_cids - number of connections used by this PF
+ * @param is_pf_loading - indicates if the PF is currently loading,
+ * i.e. it has no allocated QM resources.
+ * @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
- * @param num_tids - number of tasks used by this PF
- * @param start_pq - first Tx PQ ID associated with this PF
- * @param num_pf_pqs - number of Tx PQs associated with this PF (non-VF)
- * @param num_vf_pqs - number of Tx PQs associated with a VF
- * @param start_vport - first VPORT ID associated with this PF
+ * @param num_tids - number of tasks used by this PF
+ * @param start_pq - first Tx PQ ID associated with this PF
+ * @param num_pf_pqs - number of Tx PQs associated with this PF
+ * (non-VF)
+ * @param num_vf_pqs - number of Tx PQs associated with a VF
+ * @param start_vport - first VPORT ID associated with this PF
* @param num_vports - number of VPORTs associated with this PF
* @param pf_wfq - WFQ weight. if PF WFQ is globally disabled, the weight must
* be 0. otherwise, the weight must be non-zero.
* @param pf_rl - rate limit in Mb/sec units. a value of 0 means don't
* configure. ignored if PF RL is globally disabled.
+ * @param link_speed - link speed in Mbps.
* @param pq_params - array of size (num_pf_pqs+num_vf_pqs) with parameters for
* each Tx PQ associated with the specified PF.
* @param vport_params - array of size num_vports with parameters for each
* @return 0 on success, -1 on error.
*/
int ecore_qm_pf_rt_init(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u8 port_id,
- u8 pf_id,
- u8 max_phys_tcs_per_port,
- bool is_first_pf,
- u32 num_pf_cids,
- u32 num_vf_cids,
- u32 num_tids,
- u16 start_pq,
- u16 num_pf_pqs,
- u16 num_vf_pqs,
- u8 start_vport,
- u8 num_vports,
- u16 pf_wfq,
- u32 pf_rl,
- struct init_qm_pq_params *pq_params,
- struct init_qm_vport_params *vport_params);
+ struct ecore_ptt *p_ptt,
+ u8 pf_id,
+ u8 max_phys_tcs_per_port,
+ bool is_pf_loading,
+ u32 num_pf_cids,
+ u32 num_vf_cids,
+ u32 num_tids,
+ u16 start_pq,
+ u16 num_pf_pqs,
+ u16 num_vf_pqs,
+ u8 start_vport,
+ u8 num_vports,
+ u16 pf_wfq,
+ u32 pf_rl,
+ u32 link_speed,
+ struct init_qm_pq_params *pq_params,
+ struct init_qm_vport_params *vport_params);
+
/**
* @brief ecore_init_pf_wfq Initializes the WFQ weight of the specified PF
*
struct ecore_ptt *p_ptt,
u8 pf_id,
u16 pf_wfq);
+
/**
- * @brief ecore_init_pf_rl Initializes the rate limit of the specified PF
+ * @brief ecore_init_pf_rl - Initializes the rate limit of the specified PF
*
* @param p_hwfn
- * @param p_ptt - ptt window used for writing the registers
+ * @param p_ptt - ptt window used for writing the registers
* @param pf_id - PF ID
* @param pf_rl - rate limit in Mb/sec units
*
struct ecore_ptt *p_ptt,
u8 pf_id,
u32 pf_rl);
+
/**
* @brief ecore_init_vport_wfq Initializes the WFQ weight of specified VPORT
*
struct ecore_ptt *p_ptt,
u16 first_tx_pq_id[NUM_OF_TCS],
u16 vport_wfq);
+
/**
- * @brief ecore_init_vport_rl Initializes the rate limit of the specified VPORT
+ * @brief ecore_init_vport_rl - Initializes the rate limit of the specified
+ * VPORT.
*
- * @param p_hwfn
- * @param p_ptt - ptt window used for writing the registers
- * @param vport_id - VPORT ID
- * @param vport_rl - rate limit in Mb/sec units
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers
+ * @param vport_id - VPORT ID
+ * @param vport_rl - rate limit in Mb/sec units
+ * @param link_speed - link speed in Mbps.
*
* @return 0 on success, -1 on error.
*/
int ecore_init_vport_rl(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u8 vport_id,
- u32 vport_rl);
+ u32 vport_rl,
+ u32 link_speed);
+
/**
* @brief ecore_send_qm_stop_cmd Sends a stop command to the QM
*
u16 start_pq,
u16 num_pqs);
#ifndef UNUSED_HSI_FUNC
+
/**
* @brief ecore_init_nig_ets - initializes the NIG ETS arbiter
*
struct ecore_ptt *p_ptt,
struct init_ets_req *req,
bool is_lb);
+
/**
* @brief ecore_init_nig_lb_rl - initializes the NIG LB RLs
*
struct ecore_ptt *p_ptt,
struct init_nig_lb_rl_req *req);
#endif /* UNUSED_HSI_FUNC */
+
/**
* @brief ecore_init_nig_pri_tc_map - initializes the NIG priority to TC map.
*
void ecore_init_nig_pri_tc_map(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
struct init_nig_pri_tc_map_req *req);
+
#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_init_prs_ets - initializes the PRS Rx ETS arbiter
struct ecore_ptt *p_ptt,
struct init_ets_req *req);
#endif /* UNUSED_HSI_FUNC */
+
#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_init_brb_ram - initializes BRB RAM sizes per TC
struct ecore_ptt *p_ptt,
struct init_brb_ram_req *req);
#endif /* UNUSED_HSI_FUNC */
-#ifndef UNUSED_HSI_FUNC
+
/**
- * @brief ecore_set_engine_mf_ovlan_eth_type - initializes Nig,Prs,Pbf and llh
- * ethType Regs to input ethType
- * should Be called once per engine
- * if engine
- * is in BD mode.
+ * @brief ecore_set_vxlan_no_l2_enable - enable or disable VXLAN no L2 parsing
*
- * @param p_ptt - ptt window used for writing the registers.
- * @param ethType - etherType to configure
+ * @param p_ptt - ptt window used for writing the registers.
+ * @param enable - VXLAN no L2 enable flag.
*/
-void ecore_set_engine_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 ethType);
+void ecore_set_vxlan_no_l2_enable(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ bool enable);
+
+#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_set_port_mf_ovlan_eth_type - initializes DORQ ethType Regs to
* input ethType should Be called
* once per port.
*
- * @param p_ptt - ptt window used for writing the registers.
+ * @param p_hwfn - HW device data
* @param ethType - etherType to configure
*/
void ecore_set_port_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 ethType);
+ u32 ethType);
#endif /* UNUSED_HSI_FUNC */
+
/**
* @brief ecore_set_vxlan_dest_port - initializes vxlan tunnel destination udp
* port
void ecore_set_vxlan_dest_port(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u16 dest_port);
+
/**
* @brief ecore_set_vxlan_enable - enable or disable VXLAN tunnel in HW
*
- * @param p_ptt - ptt window used for writing the registers.
- * @param vxlan_enable - vxlan enable flag.
+ * @param p_ptt - ptt window used for writing the registers.
+ * @param vxlan_enable - vxlan enable flag.
*/
void ecore_set_vxlan_enable(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
bool vxlan_enable);
+
/**
* @brief ecore_set_gre_enable - enable or disable GRE tunnel in HW
*
struct ecore_ptt *p_ptt,
bool eth_gre_enable,
bool ip_gre_enable);
+
/**
* @brief ecore_set_geneve_dest_port - initializes geneve tunnel destination
* udp port
void ecore_set_geneve_dest_port(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u16 dest_port);
+
/**
* @brief ecore_set_gre_enable - enable or disable GRE tunnel in HW
*
bool eth_geneve_enable,
bool ip_geneve_enable);
#ifndef UNUSED_HSI_FUNC
+
/**
* @brief ecore_set_gft_event_id_cm_hdr - configure GFT event id and cm header
*
*/
void ecore_set_gft_event_id_cm_hdr(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt);
+
/**
-* @brief ecore_set_rfs_mode_enable - enable and configure HW for RFS
-*
+ * @brief ecore_gft_disable - Disable and GFT
+ *
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers.
+ * @param pf_id - pf on which to disable GFT.
+ */
+void ecore_gft_disable(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 pf_id);
+
+/**
+ * @brief ecore_gft_config - Enable and configure HW for GFT
*
-* @param p_ptt - ptt window used for writing the registers.
-* @param pf_id - pf on which to enable RFS.
-* @param tcp - set profile tcp packets.
-* @param udp - set profile udp packet.
-* @param ipv4 - set profile ipv4 packet.
-* @param ipv6 - set profile ipv6 packet.
+* @param p_ptt - ptt window used for writing the registers.
+ * @param pf_id - pf on which to enable GFT.
+* @param tcp - set profile tcp packets.
+* @param udp - set profile udp packet.
+* @param ipv4 - set profile ipv4 packet.
+* @param ipv6 - set profile ipv6 packet.
+ * @param profile_type - define packet same fields. Use enum gft_profile_type.
*/
-void ecore_set_rfs_mode_enable(struct ecore_hwfn *p_hwfn,
+void ecore_gft_config(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u16 pf_id,
bool tcp,
bool udp,
bool ipv4,
- bool ipv6);
+ bool ipv6,
+ enum gft_profile_type profile_type);
#endif /* UNUSED_HSI_FUNC */
+
/**
* @brief ecore_config_vf_zone_size_mode - Configure VF zone size mode. Must be
* used before first ETH queue started.
*/
void ecore_config_vf_zone_size_mode(struct ecore_hwfn *p_hwfn, struct ecore_ptt
*p_ptt, u16 mode, bool runtime_init);
+
/**
-* @brief ecore_get_mstorm_queue_stat_offset - get mstorm statistics offset by VF
-* zone size mode.
+ * @brief ecore_get_mstorm_queue_stat_offset - Get mstorm statistics offset by
+ * VF zone size mode.
*
* @param stat_cnt_id - statistic counter id
* @param vf_zone_size_mode - VF zone size mode. Use enum vf_zone_size_mode.
*/
u32 ecore_get_mstorm_queue_stat_offset(struct ecore_hwfn *p_hwfn,
u16 stat_cnt_id, u16 vf_zone_size_mode);
+
/**
-* @brief ecore_get_mstorm_eth_vf_prods_offset - VF producer offset by VF zone
-* size mode.
+ * @brief ecore_get_mstorm_eth_vf_prods_offset - VF producer offset by VF zone
+ * size mode.
*
* @param vf_id - vf id.
* @param vf_queue_id - per VF rx queue id.
*/
u32 ecore_get_mstorm_eth_vf_prods_offset(struct ecore_hwfn *p_hwfn, u8 vf_id, u8
vf_queue_id, u16 vf_zone_size_mode);
+/**
+ * @brief ecore_enable_context_validation - Enable and configure context
+ * validation.
+ *
+ * @param p_ptt - ptt window used for writing the registers.
+ */
+void ecore_enable_context_validation(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt);
+/**
+ * @brief ecore_calc_session_ctx_validation - Calcualte validation byte for
+ * session context.
+ *
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - context size.
+ * @param ctx_type - context type.
+ * @param cid - context cid.
+ */
+void ecore_calc_session_ctx_validation(void *p_ctx_mem,
+ u16 ctx_size,
+ u8 ctx_type,
+ u32 cid);
+
+/**
+ * @brief ecore_calc_task_ctx_validation - Calcualte validation byte for task
+ * context.
+ *
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - context size.
+ * @param ctx_type - context type.
+ * @param tid - context tid.
+ */
+void ecore_calc_task_ctx_validation(void *p_ctx_mem,
+ u16 ctx_size,
+ u8 ctx_type,
+ u32 tid);
+
+/**
+ * @brief ecore_memset_session_ctx - Memset session context to 0 while
+ * preserving validation bytes.
+ *
+ * @param p_hwfn - HW device data
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - size to initialzie.
+ * @param ctx_type - context type.
+ */
+void ecore_memset_session_ctx(void *p_ctx_mem,
+ u32 ctx_size,
+ u8 ctx_type);
+/**
+ * @brief ecore_memset_task_ctx - Memset task context to 0 while preserving
+ * validation bytes.
+ *
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - size to initialzie.
+ * @param ctx_type - context type.
+ */
+void ecore_memset_task_ctx(void *p_ctx_mem,
+ u32 ctx_size,
+ u8 ctx_type);
+
+
+/*******************************************************************************
+ * File name : rdma_init.h
+ * Author : Michael Shteinbok
+ *******************************************************************************
+ *******************************************************************************
+ * Description:
+ * RDMA HSI functions header
+ *
+ *******************************************************************************
+ * Notes: This is the input to the auto generated file drv_init_fw_funcs.h
+ *
+ *******************************************************************************
+ */
+#define NUM_STORMS 6
+
+
+
+/**
+ * @brief ecore_set_rdma_error_level - Sets the RDMA assert level.
+ * If the severity of the error will be
+ * above the level, the FW will assert.
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers
+ * @param assert_level - An array of assert levels for each storm.
+ */
+void ecore_set_rdma_error_level(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u8 assert_level[NUM_STORMS]);
+
+
#endif
Code Review / deb_dpdk.git / blobdiff