New upstream version 18.11-rc1

[deb_dpdk.git] / drivers / net / qede / base / ecore_iov_api.h

diff --git a/drivers/net/qede/base/ecore_iov_api.h b/drivers/net/qede/base/ecore_iov_api.h
index 50cb3f2..55de708 100644 (file)
--- a/drivers/net/qede/base/ecore_iov_api.h
+++ b/drivers/net/qede/base/ecore_iov_api.h
@@ -1,9 +1,7 @@
-/*
- * Copyright (c) 2016 QLogic Corporation.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2016 - 2018 Cavium Inc.
  * All rights reserved.
- * www.qlogic.com
- *
- * See LICENSE.qede_pmd for copyright and licensing details.
+ * www.cavium.com
  */
 
 #ifndef __ECORE_SRIOV_API_H__
@@ -86,6 +84,13 @@ struct ecore_public_vf_info {
         */
        u8 forced_mac[ETH_ALEN];
        u16 forced_vlan;
+
+       /* Trusted VFs can configure promiscuous mode and
+        * set MAC address inspite PF has set forced MAC.
+        * Also store shadow promisc configuration if needed.
+        */
+       bool is_trusted_configured;
+       bool is_trusted_request;
 };
 
 struct ecore_iov_vf_init_params {
@@ -345,21 +350,13 @@ ecore_iov_get_public_vf_info(struct ecore_hwfn *p_hwfn,
                             u16 vfid, bool b_enabled_only);
 
 /**
- * @brief Set pending events bitmap for given @vfid
- *
- * @param p_hwfn
- * @param vfid
- */
-void ecore_iov_pf_add_pending_events(struct ecore_hwfn *p_hwfn, u8 vfid);
-
-/**
- * @brief Copy pending events bitmap in @events and clear
- *       original copy of events
+ * @brief fills a bitmask of all VFs which have pending unhandled
+ *        messages.
  *
  * @param p_hwfn
  */
-void ecore_iov_pf_get_and_clear_pending_events(struct ecore_hwfn *p_hwfn,
-                                              u64 *events);
+void ecore_iov_pf_get_pending_events(struct ecore_hwfn *p_hwfn,
+                                    u64 *events);
 
 /**
  * @brief Copy VF's message to PF's buffer
@@ -547,6 +544,17 @@ bool ecore_iov_is_valid_vfpf_msg_length(u32 length);
  */
 u32 ecore_iov_pfvf_msg_length(void);
 
+/**
+ * @brief Returns MAC address if one is configured
+ *
+ * @parm p_hwfn
+ * @parm rel_vf_id
+ *
+ * @return OSAL_NULL if mac isn't set; Otherwise, returns MAC.
+ */
+u8 *ecore_iov_bulletin_get_mac(struct ecore_hwfn *p_hwfn,
+                              u16 rel_vf_id);
+
 /**
  * @brief Returns forced MAC address if one is configured
  *
@@ -693,25 +701,70 @@ bool ecore_iov_is_vf_started(struct ecore_hwfn *p_hwfn,
  * @return - rate in Mbps
  */
 int ecore_iov_get_vf_min_rate(struct ecore_hwfn *p_hwfn, int vfid);
+
+/**
+ * @brief - Configure min rate for VF's vport.
+ * @param p_dev
+ * @param vfid
+ * @param - rate in Mbps
+ *
+ * @return
+ */
+enum _ecore_status_t ecore_iov_configure_min_tx_rate(struct ecore_dev *p_dev,
+                                                    int vfid, u32 rate);
 #endif
 
+/**
+ * @brief ecore_pf_configure_vf_queue_coalesce - PF configure coalesce
+ *    parameters of VFs for Rx and Tx queue.
+ *    While the API allows setting coalescing per-qid, all queues sharing a SB
+ *    should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
+ *    otherwise configuration would break.
+ *
+ * @param p_hwfn
+ * @param rx_coal - Rx Coalesce value in micro seconds.
+ * @param tx_coal - TX Coalesce value in micro seconds.
+ * @param vf_id
+ * @param qid
+ *
+ * @return int
+ **/
+enum _ecore_status_t
+ecore_iov_pf_configure_vf_queue_coalesce(struct ecore_hwfn *p_hwfn,
+                                        u16 rx_coal, u16 tx_coal,
+                                        u16 vf_id, u16 qid);
+
 /**
  * @brief - Given a VF index, return index of next [including that] active VF.
  *
  * @param p_hwfn
  * @param rel_vf_id
  *
- * @return E4_MAX_NUM_VFS in case no further active VFs, otherwise index.
+ * @return MAX_NUM_VFS_E4 in case no further active VFs, otherwise index.
  */
 u16 ecore_iov_get_next_active_vf(struct ecore_hwfn *p_hwfn, u16 rel_vf_id);
 
 void ecore_iov_bulletin_set_udp_ports(struct ecore_hwfn *p_hwfn, int vfid,
                                      u16 vxlan_port, u16 geneve_port);
+
+#ifdef CONFIG_ECORE_SW_CHANNEL
+/**
+ * @brief Set whether PF should communicate with VF using SW/HW channel
+ *        Needs to be called for an enabled VF before acquire is over
+ *        [latest good point for doing that is OSAL_IOV_VF_ACQUIRE()]
+ *
+ * @param p_hwfn
+ * @param vfid - relative vf index
+ * @param b_is_hw - true iff PF is to use HW channel for communication
+ */
+void ecore_iov_set_vf_hw_channel(struct ecore_hwfn *p_hwfn, int vfid,
+                                bool b_is_hw);
+#endif
 #endif /* CONFIG_ECORE_SRIOV */
 
 #define ecore_for_each_vf(_p_hwfn, _i)                                 \
        for (_i = ecore_iov_get_next_active_vf(_p_hwfn, 0);             \
-            _i < E4_MAX_NUM_VFS;                                       \
+            _i < MAX_NUM_VFS_E4;                                       \
             _i = ecore_iov_get_next_active_vf(_p_hwfn, _i + 1))
 
 #endif