New upstream version 18.05

[deb_dpdk.git] / drivers / net / szedata2 / szedata2_iobuf.c

diff --git a/drivers/net/szedata2/szedata2_iobuf.c b/drivers/net/szedata2/szedata2_iobuf.c
deleted file mode 100644 (file)
index 3b9a71f..0000000
--- a/drivers/net/szedata2/szedata2_iobuf.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright (c) 2017 CESNET
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of CESNET nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdint.h>
-
-#include <rte_common.h>
-
-#include "szedata2_iobuf.h"
-
-/*
- * IBUFs and OBUFs can generally be located at different offsets in different
- * firmwares (modes).
- * This part defines base offsets of IBUFs and OBUFs for various cards
- * and firmwares (modes).
- * Type of firmware (mode) is set through configuration option
- * CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS.
- * Possible values are:
- * 0 - for cards (modes):
- *     NFB-100G1 (100G1)
- *
- * 1 - for cards (modes):
- *     NFB-100G2Q (100G1)
- *
- * 2 - for cards (modes):
- *     NFB-40G2 (40G2)
- *     NFB-100G2C (100G2)
- *     NFB-100G2Q (40G2)
- *
- * 3 - for cards (modes):
- *     NFB-40G2 (10G8)
- *     NFB-100G2Q (10G8)
- *
- * 4 - for cards (modes):
- *     NFB-100G1 (10G10)
- *
- * 5 - for experimental firmwares and future use
- */
-#if !defined(RTE_LIBRTE_PMD_SZEDATA2_AS)
-#error "RTE_LIBRTE_PMD_SZEDATA2_AS has to be defined"
-#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 0
-
-/*
- * Cards (modes):
- *     NFB-100G1 (100G1)
- */
-
-const uint32_t szedata2_ibuf_base_table[] = {
-       0x8000
-};
-const uint32_t szedata2_obuf_base_table[] = {
-       0x9000
-};
-
-#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 1
-
-/*
- * Cards (modes):
- *     NFB-100G2Q (100G1)
- */
-
-const uint32_t szedata2_ibuf_base_table[] = {
-       0x8800
-};
-const uint32_t szedata2_obuf_base_table[] = {
-       0x9800
-};
-
-#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 2
-
-/*
- * Cards (modes):
- *     NFB-40G2 (40G2)
- *     NFB-100G2C (100G2)
- *     NFB-100G2Q (40G2)
- */
-
-const uint32_t szedata2_ibuf_base_table[] = {
-       0x8000,
-       0x8800
-};
-const uint32_t szedata2_obuf_base_table[] = {
-       0x9000,
-       0x9800
-};
-
-#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 3
-
-/*
- * Cards (modes):
- *     NFB-40G2 (10G8)
- *     NFB-100G2Q (10G8)
- */
-
-const uint32_t szedata2_ibuf_base_table[] = {
-       0x8000,
-       0x8200,
-       0x8400,
-       0x8600,
-       0x8800,
-       0x8A00,
-       0x8C00,
-       0x8E00
-};
-const uint32_t szedata2_obuf_base_table[] = {
-       0x9000,
-       0x9200,
-       0x9400,
-       0x9600,
-       0x9800,
-       0x9A00,
-       0x9C00,
-       0x9E00
-};
-
-#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 4
-
-/*
- * Cards (modes):
- *     NFB-100G1 (10G10)
- */
-
-const uint32_t szedata2_ibuf_base_table[] = {
-       0x8000,
-       0x8200,
-       0x8400,
-       0x8600,
-       0x8800,
-       0x8A00,
-       0x8C00,
-       0x8E00,
-       0x9000,
-       0x9200
-};
-const uint32_t szedata2_obuf_base_table[] = {
-       0xA000,
-       0xA200,
-       0xA400,
-       0xA600,
-       0xA800,
-       0xAA00,
-       0xAC00,
-       0xAE00,
-       0xB000,
-       0xB200
-};
-
-#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 5
-
-/*
- * Future use and experimental firmwares.
- */
-
-const uint32_t szedata2_ibuf_base_table[] = {
-       0x8000,
-       0x8200,
-       0x8400,
-       0x8600,
-       0x8800
-};
-const uint32_t szedata2_obuf_base_table[] = {
-       0x9000,
-       0x9200,
-       0x9400,
-       0x9600,
-       0x9800
-};
-
-#else
-#error "RTE_LIBRTE_PMD_SZEDATA2_AS has wrong value, see comments in config file"
-#endif
-
-const uint32_t szedata2_ibuf_count = RTE_DIM(szedata2_ibuf_base_table);
-const uint32_t szedata2_obuf_count = RTE_DIM(szedata2_obuf_base_table);