#endif
#include <rte_io.h>
+#include <rte_bus.h>
#include "virtio_pci.h"
#include "virtio_logs.h"
* The remaining space is defined by each driver as the per-driver
* configuration space.
*/
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+ (((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
static inline int
check_vq_phys_addr_ok(struct virtqueue *vq)
uint32_t offset = cap->offset;
uint8_t *base;
- if (bar > 5) {
+ if (bar >= PCI_MAX_RESOURCE) {
PMD_INIT_LOG(ERR, "invalid bar: %u", bar);
return NULL;
}
return base + offset;
}
+#define PCI_MSIX_ENABLE 0x8000
+
static int
virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
{
}
ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
- if (ret < 0) {
- PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+ if (ret != 1) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci capability list, ret %d", ret);
return -1;
}
while (pos) {
- ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
- if (ret < 0) {
- PMD_INIT_LOG(ERR,
- "failed to read pci cap at pos: %x", pos);
+ ret = rte_pci_read_config(dev, &cap, 2, pos);
+ if (ret != 2) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci cap at pos: %x ret %d",
+ pos, ret);
break;
}
- if (cap.cap_vndr == PCI_CAP_ID_MSIX)
- hw->use_msix = 1;
+ if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+ /* Transitional devices would also have this capability,
+ * that's why we also check if msix is enabled.
+ * 1st byte is cap ID; 2nd byte is the position of next
+ * cap; next two bytes are the flags.
+ */
+ uint16_t flags;
+
+ ret = rte_pci_read_config(dev, &flags, sizeof(flags),
+ pos + 2);
+ if (ret != sizeof(flags)) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci cap at pos:"
+ " %x ret %d", pos + 2, ret);
+ break;
+ }
+
+ if (flags & PCI_MSIX_ENABLE)
+ hw->use_msix = VIRTIO_MSIX_ENABLED;
+ else
+ hw->use_msix = VIRTIO_MSIX_DISABLED;
+ }
if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
PMD_INIT_LOG(DEBUG,
goto next;
}
+ ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+ if (ret != sizeof(cap)) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci cap at pos: %x ret %d",
+ pos, ret);
+ break;
+ }
+
PMD_INIT_LOG(DEBUG,
"[%2x] cfg type: %u, bar: %u, offset: %04x, len: %u",
pos, cap.cfg_type, cap.bar, cap.offset, cap.length);
hw->common_cfg = get_cfg_addr(dev, &cap);
break;
case VIRTIO_PCI_CAP_NOTIFY_CFG:
- rte_pci_read_config(dev, &hw->notify_off_multiplier,
+ ret = rte_pci_read_config(dev,
+ &hw->notify_off_multiplier,
4, pos + sizeof(cap));
- hw->notify_base = get_cfg_addr(dev, &cap);
+ if (ret != 4)
+ PMD_INIT_LOG(DEBUG,
+ "failed to read notify_off_multiplier, ret %d",
+ ret);
+ else
+ hw->notify_base = get_cfg_addr(dev, &cap);
break;
case VIRTIO_PCI_CAP_DEVICE_CFG:
hw->dev_cfg = get_cfg_addr(dev, &cap);
if (rte_pci_ioport_map(dev, 0, VTPCI_IO(hw)) < 0) {
if (dev->kdrv == RTE_KDRV_UNKNOWN &&
(!dev->device.devargs ||
- dev->device.devargs->type !=
- RTE_DEVTYPE_WHITELISTED_PCI)) {
+ dev->device.devargs->bus !=
+ rte_bus_find_by_name("pci"))) {
PMD_INIT_LOG(INFO,
"skip kernel managed virtio device.");
return 1;
return 0;
}
+
+enum virtio_msix_status
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+ uint8_t pos;
+ int ret;
+
+ ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+ if (ret != 1) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci capability list, ret %d", ret);
+ return VIRTIO_MSIX_NONE;
+ }
+
+ while (pos) {
+ uint8_t cap[2];
+
+ ret = rte_pci_read_config(dev, cap, sizeof(cap), pos);
+ if (ret != sizeof(cap)) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci cap at pos: %x ret %d",
+ pos, ret);
+ break;
+ }
+
+ if (cap[0] == PCI_CAP_ID_MSIX) {
+ uint16_t flags;
+
+ ret = rte_pci_read_config(dev, &flags, sizeof(flags),
+ pos + sizeof(cap));
+ if (ret != sizeof(flags)) {
+ PMD_INIT_LOG(DEBUG,
+ "failed to read pci cap at pos:"
+ " %x ret %d", pos + 2, ret);
+ break;
+ }
+
+ if (flags & PCI_MSIX_ENABLE)
+ return VIRTIO_MSIX_ENABLED;
+ else
+ return VIRTIO_MSIX_DISABLED;
+ }
+
+ pos = cap[1];
+ }
+
+ return VIRTIO_MSIX_NONE;
+}