-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2015 Intel Corporation
*/
#include <stdint.h>
/*
* Configurable number of RX/TX ring descriptors
*/
-#define RTE_RX_DESC_DEFAULT 128
-#define RTE_TX_DESC_DEFAULT 512
+#define RTE_RX_DESC_DEFAULT 1024
+#define RTE_TX_DESC_DEFAULT 1024
#define BOND_IP_1 7
#define BOND_IP_2 0
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
int retval;
uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
- if (portid >= rte_eth_dev_count())
+ if (!rte_eth_dev_is_valid_port(portid))
rte_exit(EXIT_FAILURE, "Invalid port\n");
- retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+ rte_eth_dev_info_get(portid, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+ dev_info.flow_type_rss_offloads;
+ if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+ port_conf.rx_adv_conf.rss_conf.rss_hf) {
+ printf("Port %u modified RSS hash function based on hardware support,"
+ "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+ portid,
+ port_conf.rx_adv_conf.rss_conf.rss_hf,
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+ }
+
+ retval = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
portid, retval);
"failed (res=%d)\n", portid, retval);
/* RX setup */
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
- rte_eth_dev_socket_id(portid), NULL,
+ rte_eth_dev_socket_id(portid),
+ &rxq_conf,
mbuf_pool);
if (retval < 0)
rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)",
portid, retval);
/* TX setup */
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
- rte_eth_dev_socket_id(portid), NULL);
+ rte_eth_dev_socket_id(portid), &txq_conf);
if (retval < 0)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
uint8_t i;
uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
- retval = rte_eth_bond_create("bond0", BONDING_MODE_ALB,
+ retval = rte_eth_bond_create("net_bonding0", BONDING_MODE_ALB,
0 /*SOCKET_ID_ANY*/);
if (retval < 0)
rte_exit(EXIT_FAILURE,
BOND_PORT = retval;
- retval = rte_eth_dev_configure(BOND_PORT, 1, 1, &port_conf);
+ rte_eth_dev_info_get(BOND_PORT, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ retval = rte_eth_dev_configure(BOND_PORT, 1, 1, &local_port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
BOND_PORT, retval);
"failed (res=%d)\n", BOND_PORT, retval);
/* RX setup */
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
retval = rte_eth_rx_queue_setup(BOND_PORT, 0, nb_rxd,
- rte_eth_dev_socket_id(BOND_PORT), NULL,
- mbuf_pool);
+ rte_eth_dev_socket_id(BOND_PORT),
+ &rxq_conf, mbuf_pool);
if (retval < 0)
rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)",
BOND_PORT, retval);
/* TX setup */
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
retval = rte_eth_tx_queue_setup(BOND_PORT, 0, nb_txd,
- rte_eth_dev_socket_id(BOND_PORT), NULL);
+ rte_eth_dev_socket_id(BOND_PORT), &txq_conf);
if (retval < 0)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
(BOND_IP_3 << 16) | (BOND_IP_4 << 24);
created_pkt = rte_pktmbuf_alloc(mbuf_pool);
+ if (created_pkt == NULL) {
+ cmdline_printf(cl, "Failed to allocate mbuf\n");
+ return;
+ }
+
pkt_size = sizeof(struct ether_hdr) + sizeof(struct arp_hdr);
created_pkt->data_len = pkt_size;
created_pkt->pkt_len = pkt_size;
main(int argc, char *argv[])
{
int ret;
- uint8_t nb_ports, i;
+ uint16_t nb_ports, i;
/* init EAL */
ret = rte_eal_init(argc, argv);
- rte_eal_devargs_dump(stdout);
+ rte_devargs_dump(stdout);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
argc -= ret;
argv += ret;
- nb_ports = rte_eth_dev_count();
+ nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "Give at least one port\n");
else if (nb_ports > MAX_PORTS)
/* initialize all ports */
slaves_count = nb_ports;
- for (i = 0; i < nb_ports; i++) {
+ RTE_ETH_FOREACH_DEV(i) {
slave_port_init(i, mbuf_pool);
slaves[i] = i;
}
Code Review / deb_dpdk.git / blobdiff