--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016-2017 Intel Corporation
+ */
+
+#include <getopt.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <signal.h>
+#include <sched.h>
+
+#include "pipeline_common.h"
+
+struct config_data cdata = {
+ .num_packets = (1L << 25), /* do ~32M packets */
+ .num_fids = 512,
+ .queue_type = RTE_SCHED_TYPE_ATOMIC,
+ .next_qid = {-1},
+ .qid = {-1},
+ .num_stages = 1,
+ .worker_cq_depth = 16
+};
+
+static bool
+core_in_use(unsigned int lcore_id) {
+ return (fdata->rx_core[lcore_id] || fdata->sched_core[lcore_id] ||
+ fdata->tx_core[lcore_id] || fdata->worker_core[lcore_id]);
+}
+
+static void
+eth_tx_buffer_retry(struct rte_mbuf **pkts, uint16_t unsent,
+ void *userdata)
+{
+ int port_id = (uintptr_t) userdata;
+ unsigned int _sent = 0;
+
+ do {
+ /* Note: hard-coded TX queue */
+ _sent += rte_eth_tx_burst(port_id, 0, &pkts[_sent],
+ unsent - _sent);
+ } while (_sent != unsent);
+}
+
+/*
+ * Parse the coremask given as argument (hexadecimal string) and fill
+ * the global configuration (core role and core count) with the parsed
+ * value.
+ */
+static int xdigit2val(unsigned char c)
+{
+ int val;
+
+ if (isdigit(c))
+ val = c - '0';
+ else if (isupper(c))
+ val = c - 'A' + 10;
+ else
+ val = c - 'a' + 10;
+ return val;
+}
+
+static uint64_t
+parse_coremask(const char *coremask)
+{
+ int i, j, idx = 0;
+ unsigned int count = 0;
+ char c;
+ int val;
+ uint64_t mask = 0;
+ const int32_t BITS_HEX = 4;
+
+ if (coremask == NULL)
+ return -1;
+ /* Remove all blank characters ahead and after .
+ * Remove 0x/0X if exists.
+ */
+ while (isblank(*coremask))
+ coremask++;
+ if (coremask[0] == '0' && ((coremask[1] == 'x')
+ || (coremask[1] == 'X')))
+ coremask += 2;
+ i = strlen(coremask);
+ while ((i > 0) && isblank(coremask[i - 1]))
+ i--;
+ if (i == 0)
+ return -1;
+
+ for (i = i - 1; i >= 0 && idx < MAX_NUM_CORE; i--) {
+ c = coremask[i];
+ if (isxdigit(c) == 0) {
+ /* invalid characters */
+ return -1;
+ }
+ val = xdigit2val(c);
+ for (j = 0; j < BITS_HEX && idx < MAX_NUM_CORE; j++, idx++) {
+ if ((1 << j) & val) {
+ mask |= (1UL << idx);
+ count++;
+ }
+ }
+ }
+ for (; i >= 0; i--)
+ if (coremask[i] != '0')
+ return -1;
+ if (count == 0)
+ return -1;
+ return mask;
+}
+
+static struct option long_options[] = {
+ {"workers", required_argument, 0, 'w'},
+ {"packets", required_argument, 0, 'n'},
+ {"atomic-flows", required_argument, 0, 'f'},
+ {"num_stages", required_argument, 0, 's'},
+ {"rx-mask", required_argument, 0, 'r'},
+ {"tx-mask", required_argument, 0, 't'},
+ {"sched-mask", required_argument, 0, 'e'},
+ {"cq-depth", required_argument, 0, 'c'},
+ {"work-cycles", required_argument, 0, 'W'},
+ {"mempool-size", required_argument, 0, 'm'},
+ {"queue-priority", no_argument, 0, 'P'},
+ {"parallel", no_argument, 0, 'p'},
+ {"ordered", no_argument, 0, 'o'},
+ {"quiet", no_argument, 0, 'q'},
+ {"use-atq", no_argument, 0, 'a'},
+ {"dump", no_argument, 0, 'D'},
+ {0, 0, 0, 0}
+};
+
+static void
+usage(void)
+{
+ const char *usage_str =
+ " Usage: eventdev_demo [options]\n"
+ " Options:\n"
+ " -n, --packets=N Send N packets (default ~32M), 0 implies no limit\n"
+ " -f, --atomic-flows=N Use N random flows from 1 to N (default 16)\n"
+ " -s, --num_stages=N Use N atomic stages (default 1)\n"
+ " -r, --rx-mask=core mask Run NIC rx on CPUs in core mask\n"
+ " -w, --worker-mask=core mask Run worker on CPUs in core mask\n"
+ " -t, --tx-mask=core mask Run NIC tx on CPUs in core mask\n"
+ " -e --sched-mask=core mask Run scheduler on CPUs in core mask\n"
+ " -c --cq-depth=N Worker CQ depth (default 16)\n"
+ " -W --work-cycles=N Worker cycles (default 0)\n"
+ " -P --queue-priority Enable scheduler queue prioritization\n"
+ " -o, --ordered Use ordered scheduling\n"
+ " -p, --parallel Use parallel scheduling\n"
+ " -q, --quiet Minimize printed output\n"
+ " -a, --use-atq Use all type queues\n"
+ " -m, --mempool-size=N Dictate the mempool size\n"
+ " -D, --dump Print detailed statistics before exit"
+ "\n";
+ fprintf(stderr, "%s", usage_str);
+ exit(1);
+}
+
+static void
+parse_app_args(int argc, char **argv)
+{
+ /* Parse cli options*/
+ int option_index;
+ int c;
+ opterr = 0;
+ uint64_t rx_lcore_mask = 0;
+ uint64_t tx_lcore_mask = 0;
+ uint64_t sched_lcore_mask = 0;
+ uint64_t worker_lcore_mask = 0;
+ int i;
+
+ for (;;) {
+ c = getopt_long(argc, argv, "r:t:e:c:w:n:f:s:m:paoPqDW:",
+ long_options, &option_index);
+ if (c == -1)
+ break;
+
+ int popcnt = 0;
+ switch (c) {
+ case 'n':
+ cdata.num_packets = (int64_t)atol(optarg);
+ if (cdata.num_packets == 0)
+ cdata.num_packets = INT64_MAX;
+ break;
+ case 'f':
+ cdata.num_fids = (unsigned int)atoi(optarg);
+ break;
+ case 's':
+ cdata.num_stages = (unsigned int)atoi(optarg);
+ break;
+ case 'c':
+ cdata.worker_cq_depth = (unsigned int)atoi(optarg);
+ break;
+ case 'W':
+ cdata.worker_cycles = (unsigned int)atoi(optarg);
+ break;
+ case 'P':
+ cdata.enable_queue_priorities = 1;
+ break;
+ case 'o':
+ cdata.queue_type = RTE_SCHED_TYPE_ORDERED;
+ break;
+ case 'p':
+ cdata.queue_type = RTE_SCHED_TYPE_PARALLEL;
+ break;
+ case 'a':
+ cdata.all_type_queues = 1;
+ break;
+ case 'q':
+ cdata.quiet = 1;
+ break;
+ case 'D':
+ cdata.dump_dev = 1;
+ break;
+ case 'w':
+ worker_lcore_mask = parse_coremask(optarg);
+ break;
+ case 'r':
+ rx_lcore_mask = parse_coremask(optarg);
+ popcnt = __builtin_popcountll(rx_lcore_mask);
+ fdata->rx_single = (popcnt == 1);
+ break;
+ case 't':
+ tx_lcore_mask = parse_coremask(optarg);
+ popcnt = __builtin_popcountll(tx_lcore_mask);
+ fdata->tx_single = (popcnt == 1);
+ break;
+ case 'e':
+ sched_lcore_mask = parse_coremask(optarg);
+ popcnt = __builtin_popcountll(sched_lcore_mask);
+ fdata->sched_single = (popcnt == 1);
+ break;
+ case 'm':
+ cdata.num_mbuf = (uint64_t)atol(optarg);
+ break;
+ default:
+ usage();
+ }
+ }
+
+ cdata.worker_lcore_mask = worker_lcore_mask;
+ cdata.sched_lcore_mask = sched_lcore_mask;
+ cdata.rx_lcore_mask = rx_lcore_mask;
+ cdata.tx_lcore_mask = tx_lcore_mask;
+
+ if (cdata.num_stages == 0 || cdata.num_stages > MAX_NUM_STAGES)
+ usage();
+
+ for (i = 0; i < MAX_NUM_CORE; i++) {
+ fdata->rx_core[i] = !!(rx_lcore_mask & (1UL << i));
+ fdata->tx_core[i] = !!(tx_lcore_mask & (1UL << i));
+ fdata->sched_core[i] = !!(sched_lcore_mask & (1UL << i));
+ fdata->worker_core[i] = !!(worker_lcore_mask & (1UL << i));
+
+ if (fdata->worker_core[i])
+ cdata.num_workers++;
+ if (core_in_use(i))
+ cdata.active_cores++;
+ }
+}
+
+/*
+ * Initializes a given port using global settings and with the RX buffers
+ * coming from the mbuf_pool passed as a parameter.
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+ static const struct rte_eth_conf port_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_RSS,
+ .max_rx_pkt_len = ETHER_MAX_LEN,
+ .ignore_offload_bitfield = 1,
+ },
+ .rx_adv_conf = {
+ .rss_conf = {
+ .rss_hf = ETH_RSS_IP |
+ ETH_RSS_TCP |
+ ETH_RSS_UDP,
+ }
+ }
+ };
+ const uint16_t rx_rings = 1, tx_rings = 1;
+ const uint16_t rx_ring_size = 512, tx_ring_size = 512;
+ struct rte_eth_conf port_conf = port_conf_default;
+ int retval;
+ uint16_t q;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_txconf txconf;
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+
+ rte_eth_dev_info_get(port, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ /* Configure the Ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ /* Allocate and set up 1 RX queue per Ethernet port. */
+ for (q = 0; q < rx_rings; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
+ rte_eth_dev_socket_id(port), NULL, mbuf_pool);
+ if (retval < 0)
+ return retval;
+ }
+
+ txconf = dev_info.default_txconf;
+ txconf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txconf.offloads = port_conf_default.txmode.offloads;
+ /* Allocate and set up 1 TX queue per Ethernet port. */
+ for (q = 0; q < tx_rings; q++) {
+ retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
+ rte_eth_dev_socket_id(port), &txconf);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the Ethernet port. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0)
+ return retval;
+
+ /* Display the port MAC address. */
+ struct ether_addr addr;
+ rte_eth_macaddr_get(port, &addr);
+ printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
+ " %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
+ (unsigned int)port,
+ addr.addr_bytes[0], addr.addr_bytes[1],
+ addr.addr_bytes[2], addr.addr_bytes[3],
+ addr.addr_bytes[4], addr.addr_bytes[5]);
+
+ /* Enable RX in promiscuous mode for the Ethernet device. */
+ rte_eth_promiscuous_enable(port);
+
+ return 0;
+}
+
+static int
+init_ports(unsigned int num_ports)
+{
+ uint8_t portid;
+ unsigned int i;
+
+ if (!cdata.num_mbuf)
+ cdata.num_mbuf = 16384 * num_ports;
+
+ struct rte_mempool *mp = rte_pktmbuf_pool_create("packet_pool",
+ /* mbufs */ cdata.num_mbuf,
+ /* cache_size */ 512,
+ /* priv_size*/ 0,
+ /* data_room_size */ RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
+
+ for (portid = 0; portid < num_ports; portid++)
+ if (port_init(portid, mp) != 0)
+ rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8 "\n",
+ portid);
+
+ for (i = 0; i < num_ports; i++) {
+ void *userdata = (void *)(uintptr_t) i;
+ fdata->tx_buf[i] =
+ rte_malloc(NULL, RTE_ETH_TX_BUFFER_SIZE(32), 0);
+ if (fdata->tx_buf[i] == NULL)
+ rte_panic("Out of memory\n");
+ rte_eth_tx_buffer_init(fdata->tx_buf[i], 32);
+ rte_eth_tx_buffer_set_err_callback(fdata->tx_buf[i],
+ eth_tx_buffer_retry,
+ userdata);
+ }
+
+ return 0;
+}
+
+static void
+do_capability_setup(uint16_t nb_ethdev, uint8_t eventdev_id)
+{
+ int i;
+ uint8_t mt_unsafe = 0;
+ uint8_t burst = 0;
+
+ for (i = 0; i < nb_ethdev; i++) {
+ struct rte_eth_dev_info dev_info;
+ memset(&dev_info, 0, sizeof(struct rte_eth_dev_info));
+
+ rte_eth_dev_info_get(i, &dev_info);
+ /* Check if it is safe ask worker to tx. */
+ mt_unsafe |= !(dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_MT_LOCKFREE);
+ }
+
+ struct rte_event_dev_info eventdev_info;
+ memset(&eventdev_info, 0, sizeof(struct rte_event_dev_info));
+
+ rte_event_dev_info_get(eventdev_id, &eventdev_info);
+ burst = eventdev_info.event_dev_cap & RTE_EVENT_DEV_CAP_BURST_MODE ? 1 :
+ 0;
+
+ if (mt_unsafe)
+ set_worker_generic_setup_data(&fdata->cap, burst);
+ else
+ set_worker_tx_setup_data(&fdata->cap, burst);
+}
+
+static void
+signal_handler(int signum)
+{
+ if (fdata->done)
+ rte_exit(1, "Exiting on signal %d\n", signum);
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ fdata->done = 1;
+ }
+ if (signum == SIGTSTP)
+ rte_event_dev_dump(0, stdout);
+}
+
+static inline uint64_t
+port_stat(int dev_id, int32_t p)
+{
+ char statname[64];
+ snprintf(statname, sizeof(statname), "port_%u_rx", p);
+ return rte_event_dev_xstats_by_name_get(dev_id, statname, NULL);
+}
+
+int
+main(int argc, char **argv)
+{
+ struct worker_data *worker_data;
+ unsigned int num_ports;
+ int lcore_id;
+ int err;
+
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+ signal(SIGTSTP, signal_handler);
+
+ err = rte_eal_init(argc, argv);
+ if (err < 0)
+ rte_panic("Invalid EAL arguments\n");
+
+ argc -= err;
+ argv += err;
+
+ fdata = rte_malloc(NULL, sizeof(struct fastpath_data), 0);
+ if (fdata == NULL)
+ rte_panic("Out of memory\n");
+
+ /* Parse cli options*/
+ parse_app_args(argc, argv);
+
+ num_ports = rte_eth_dev_count();
+ if (num_ports == 0)
+ rte_panic("No ethernet ports found\n");
+
+ const unsigned int cores_needed = cdata.active_cores;
+
+ if (!cdata.quiet) {
+ printf(" Config:\n");
+ printf("\tports: %u\n", num_ports);
+ printf("\tworkers: %u\n", cdata.num_workers);
+ printf("\tpackets: %"PRIi64"\n", cdata.num_packets);
+ printf("\tQueue-prio: %u\n", cdata.enable_queue_priorities);
+ if (cdata.queue_type == RTE_SCHED_TYPE_ORDERED)
+ printf("\tqid0 type: ordered\n");
+ if (cdata.queue_type == RTE_SCHED_TYPE_ATOMIC)
+ printf("\tqid0 type: atomic\n");
+ printf("\tCores available: %u\n", rte_lcore_count());
+ printf("\tCores used: %u\n", cores_needed);
+ }
+
+ if (rte_lcore_count() < cores_needed)
+ rte_panic("Too few cores (%d < %d)\n", rte_lcore_count(),
+ cores_needed);
+
+ const unsigned int ndevs = rte_event_dev_count();
+ if (ndevs == 0)
+ rte_panic("No dev_id devs found. Pasl in a --vdev eventdev.\n");
+ if (ndevs > 1)
+ fprintf(stderr, "Warning: More than one eventdev, using idx 0");
+
+
+ do_capability_setup(num_ports, 0);
+ fdata->cap.check_opt();
+
+ worker_data = rte_calloc(0, cdata.num_workers,
+ sizeof(worker_data[0]), 0);
+ if (worker_data == NULL)
+ rte_panic("rte_calloc failed\n");
+
+ int dev_id = fdata->cap.evdev_setup(&cons_data, worker_data);
+ if (dev_id < 0)
+ rte_exit(EXIT_FAILURE, "Error setting up eventdev\n");
+
+ init_ports(num_ports);
+ fdata->cap.adptr_setup(num_ports);
+
+ int worker_idx = 0;
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ if (lcore_id >= MAX_NUM_CORE)
+ break;
+
+ if (!fdata->rx_core[lcore_id] &&
+ !fdata->worker_core[lcore_id] &&
+ !fdata->tx_core[lcore_id] &&
+ !fdata->sched_core[lcore_id])
+ continue;
+
+ if (fdata->rx_core[lcore_id])
+ printf(
+ "[%s()] lcore %d executing NIC Rx\n",
+ __func__, lcore_id);
+
+ if (fdata->tx_core[lcore_id])
+ printf(
+ "[%s()] lcore %d executing NIC Tx, and using eventdev port %u\n",
+ __func__, lcore_id, cons_data.port_id);
+
+ if (fdata->sched_core[lcore_id])
+ printf("[%s()] lcore %d executing scheduler\n",
+ __func__, lcore_id);
+
+ if (fdata->worker_core[lcore_id])
+ printf(
+ "[%s()] lcore %d executing worker, using eventdev port %u\n",
+ __func__, lcore_id,
+ worker_data[worker_idx].port_id);
+
+ err = rte_eal_remote_launch(fdata->cap.worker,
+ &worker_data[worker_idx], lcore_id);
+ if (err) {
+ rte_panic("Failed to launch worker on core %d\n",
+ lcore_id);
+ continue;
+ }
+ if (fdata->worker_core[lcore_id])
+ worker_idx++;
+ }
+
+ lcore_id = rte_lcore_id();
+
+ if (core_in_use(lcore_id))
+ fdata->cap.worker(&worker_data[worker_idx++]);
+
+ rte_eal_mp_wait_lcore();
+
+ if (cdata.dump_dev)
+ rte_event_dev_dump(dev_id, stdout);
+
+ if (!cdata.quiet && (port_stat(dev_id, worker_data[0].port_id) !=
+ (uint64_t)-ENOTSUP)) {
+ printf("\nPort Workload distribution:\n");
+ uint32_t i;
+ uint64_t tot_pkts = 0;
+ uint64_t pkts_per_wkr[RTE_MAX_LCORE] = {0};
+ for (i = 0; i < cdata.num_workers; i++) {
+ pkts_per_wkr[i] =
+ port_stat(dev_id, worker_data[i].port_id);
+ tot_pkts += pkts_per_wkr[i];
+ }
+ for (i = 0; i < cdata.num_workers; i++) {
+ float pc = pkts_per_wkr[i] * 100 /
+ ((float)tot_pkts);
+ printf("worker %i :\t%.1f %% (%"PRIu64" pkts)\n",
+ i, pc, pkts_per_wkr[i]);
+ }
+
+ }
+
+ return 0;
+}
Code Review / deb_dpdk.git / blobdiff