-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation
*/
#include <stdio.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_eal.h>
-#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_ip.h>
/*
* Configurable number of RX/TX ring descriptors
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
#define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
#define MAX_RX_QUEUE_PER_PORT 128
struct lcore_conf lcore_conf[RTE_MAX_LCORE];
struct lcore_params {
- uint8_t port_id;
+ uint16_t port_id;
uint8_t queue_id;
uint8_t lcore_id;
} __rte_cache_aligned;
.mq_mode = ETH_MQ_RX_RSS,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 1, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CHECKSUM,
},
.rx_adv_conf = {
.rss_conf = {
}
static int
-check_port_config(const unsigned nb_ports)
+check_port_config(void)
{
- unsigned portid;
+ uint16_t portid;
uint16_t i;
for (i = 0; i < nb_lcore_params; ++i) {
printf("port %u is not enabled in port mask\n", portid);
return -1;
}
- if (portid >= nb_ports) {
+ if (!rte_eth_dev_is_valid_port(portid)) {
printf("port %u is not present on the board\n", portid);
return -1;
}
}
static uint8_t
-get_port_n_rx_queues(const uint8_t port)
+get_port_n_rx_queues(const uint16_t port)
{
int queue = -1;
uint16_t i;
static void
print_usage(const char *prgname)
{
- printf ("%s [EAL options] -- -p PORTMASK -P"
- " [--config (port,queue,lcore)[,(port,queue,lcore]]"
- " [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
- " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -P : enable promiscuous mode\n"
- " -E : enable exact match\n"
- " -L : enable longest prefix match\n"
- " --config (port,queue,lcore): rx queues configuration\n"
- " --eth-dest=X,MM:MM:MM:MM:MM:MM: optional, ethernet destination for port X\n"
- " --no-numa: optional, disable numa awareness\n"
- " --ipv6: optional, specify it if running ipv6 packets\n"
- " --enable-jumbo: enable jumbo frame"
- " which max packet len is PKTLEN in decimal (64-9600)\n"
- " --hash-entry-num: specify the hash entry number in hexadecimal to be setup\n",
+ fprintf(stderr, "%s [EAL options] --"
+ " -p PORTMASK"
+ " [-P]"
+ " [-E]"
+ " [-L]"
+ " --config (port,queue,lcore)[,(port,queue,lcore)]"
+ " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
+ " [--enable-jumbo [--max-pkt-len PKTLEN]]"
+ " [--no-numa]"
+ " [--hash-entry-num]"
+ " [--ipv6]"
+ " [--parse-ptype]\n\n"
+
+ " -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
+ " -P : Enable promiscuous mode\n"
+ " -E : Enable exact match\n"
+ " -L : Enable longest prefix match (default)\n"
+ " --config (port,queue,lcore): Rx queue configuration\n"
+ " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
+ " --enable-jumbo: Enable jumbo frames\n"
+ " --max-pkt-len: Under the premise of enabling jumbo,\n"
+ " maximum packet length in decimal (64-9600)\n"
+ " --no-numa: Disable numa awareness\n"
+ " --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
+ " --ipv6: Set if running ipv6 packets\n"
+ " --parse-ptype: Set to use software to analyze packet type\n\n",
prgname);
}
static void
parse_eth_dest(const char *optarg)
{
- uint8_t portid;
+ uint16_t portid;
char *port_end;
uint8_t c, *dest, peer_addr[6];
#define MAX_JUMBO_PKT_LEN 9600
#define MEMPOOL_CACHE_SIZE 256
+static const char short_options[] =
+ "p:" /* portmask */
+ "P" /* promiscuous */
+ "L" /* enable long prefix match */
+ "E" /* enable exact match */
+ ;
+
#define CMD_LINE_OPT_CONFIG "config"
#define CMD_LINE_OPT_ETH_DEST "eth-dest"
#define CMD_LINE_OPT_NO_NUMA "no-numa"
#define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
#define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
#define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
+enum {
+ /* long options mapped to a short option */
+
+ /* first long only option value must be >= 256, so that we won't
+ * conflict with short options */
+ CMD_LINE_OPT_MIN_NUM = 256,
+ CMD_LINE_OPT_CONFIG_NUM,
+ CMD_LINE_OPT_ETH_DEST_NUM,
+ CMD_LINE_OPT_NO_NUMA_NUM,
+ CMD_LINE_OPT_IPV6_NUM,
+ CMD_LINE_OPT_ENABLE_JUMBO_NUM,
+ CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
+ CMD_LINE_OPT_PARSE_PTYPE_NUM,
+};
+
+static const struct option lgopts[] = {
+ {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
+ {CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
+ {CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
+ {CMD_LINE_OPT_IPV6, 0, 0, CMD_LINE_OPT_IPV6_NUM},
+ {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
+ {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
+ {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
+ {NULL, 0, 0, 0}
+};
/*
* This expression is used to calculate the number of mbufs needed
* value of 8192
*/
#define NB_MBUF RTE_MAX( \
- (nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT + \
- nb_ports*nb_lcores*MAX_PKT_BURST + \
- nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT + \
- nb_lcores*MEMPOOL_CACHE_SIZE), \
+ (nb_ports*nb_rx_queue*nb_rxd + \
+ nb_ports*nb_lcores*MAX_PKT_BURST + \
+ nb_ports*n_tx_queue*nb_txd + \
+ nb_lcores*MEMPOOL_CACHE_SIZE), \
(unsigned)8192)
/* Parse the argument given in the command line of the application */
char **argvopt;
int option_index;
char *prgname = argv[0];
- static struct option lgopts[] = {
- {CMD_LINE_OPT_CONFIG, 1, 0, 0},
- {CMD_LINE_OPT_ETH_DEST, 1, 0, 0},
- {CMD_LINE_OPT_NO_NUMA, 0, 0, 0},
- {CMD_LINE_OPT_IPV6, 0, 0, 0},
- {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, 0},
- {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, 0},
- {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
- {NULL, 0, 0, 0}
- };
argvopt = argv;
/* Error or normal output strings. */
- const char *str1 = "L3FWD: Invalid portmask";
- const char *str2 = "L3FWD: Promiscuous mode selected";
- const char *str3 = "L3FWD: Exact match selected";
- const char *str4 = "L3FWD: Longest-prefix match selected";
- const char *str5 = "L3FWD: Invalid config";
- const char *str6 = "L3FWD: NUMA is disabled";
- const char *str7 = "L3FWD: IPV6 is specified";
- const char *str8 =
- "L3FWD: Jumbo frame is enabled - disabling simple TX path";
- const char *str9 = "L3FWD: Invalid packet length";
- const char *str10 = "L3FWD: Set jumbo frame max packet len to ";
- const char *str11 = "L3FWD: Invalid hash entry number";
- const char *str12 =
- "L3FWD: LPM and EM are mutually exclusive, select only one";
- const char *str13 = "L3FWD: LPM or EM none selected, default LPM on";
-
- while ((opt = getopt_long(argc, argvopt, "p:PLE",
+ while ((opt = getopt_long(argc, argvopt, short_options,
lgopts, &option_index)) != EOF) {
switch (opt) {
case 'p':
enabled_port_mask = parse_portmask(optarg);
if (enabled_port_mask == 0) {
- printf("%s\n", str1);
+ fprintf(stderr, "Invalid portmask\n");
print_usage(prgname);
return -1;
}
break;
+
case 'P':
- printf("%s\n", str2);
promiscuous_on = 1;
break;
case 'E':
- printf("%s\n", str3);
l3fwd_em_on = 1;
break;
case 'L':
- printf("%s\n", str4);
l3fwd_lpm_on = 1;
break;
/* long options */
- case 0:
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_CONFIG,
- sizeof(CMD_LINE_OPT_CONFIG))) {
-
- ret = parse_config(optarg);
- if (ret) {
- printf("%s\n", str5);
- print_usage(prgname);
- return -1;
- }
- }
-
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_ETH_DEST,
- sizeof(CMD_LINE_OPT_ETH_DEST))) {
- parse_eth_dest(optarg);
- }
-
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_NO_NUMA,
- sizeof(CMD_LINE_OPT_NO_NUMA))) {
- printf("%s\n", str6);
- numa_on = 0;
+ case CMD_LINE_OPT_CONFIG_NUM:
+ ret = parse_config(optarg);
+ if (ret) {
+ fprintf(stderr, "Invalid config\n");
+ print_usage(prgname);
+ return -1;
}
+ break;
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_IPV6,
- sizeof(CMD_LINE_OPT_IPV6))) {
- printf("%sn", str7);
- ipv6 = 1;
- }
+ case CMD_LINE_OPT_ETH_DEST_NUM:
+ parse_eth_dest(optarg);
+ break;
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_ENABLE_JUMBO,
- sizeof(CMD_LINE_OPT_ENABLE_JUMBO))) {
- struct option lenopts = {
- "max-pkt-len", required_argument, 0, 0
- };
-
- printf("%s\n", str8);
- port_conf.rxmode.jumbo_frame = 1;
-
- /*
- * if no max-pkt-len set, use the default
- * value ETHER_MAX_LEN.
- */
- if (0 == getopt_long(argc, argvopt, "",
- &lenopts, &option_index)) {
- ret = parse_max_pkt_len(optarg);
- if ((ret < 64) ||
- (ret > MAX_JUMBO_PKT_LEN)) {
- printf("%s\n", str9);
- print_usage(prgname);
- return -1;
- }
- port_conf.rxmode.max_rx_pkt_len = ret;
- }
- printf("%s %u\n", str10,
- (unsigned int)port_conf.rxmode.max_rx_pkt_len);
- }
+ case CMD_LINE_OPT_NO_NUMA_NUM:
+ numa_on = 0;
+ break;
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_HASH_ENTRY_NUM,
- sizeof(CMD_LINE_OPT_HASH_ENTRY_NUM))) {
+ case CMD_LINE_OPT_IPV6_NUM:
+ ipv6 = 1;
+ break;
- ret = parse_hash_entry_number(optarg);
- if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
- hash_entry_number = ret;
- } else {
- printf("%s\n", str11);
+ case CMD_LINE_OPT_ENABLE_JUMBO_NUM: {
+ const struct option lenopts = {
+ "max-pkt-len", required_argument, 0, 0
+ };
+
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+
+ /*
+ * if no max-pkt-len set, use the default
+ * value ETHER_MAX_LEN.
+ */
+ if (getopt_long(argc, argvopt, "",
+ &lenopts, &option_index) == 0) {
+ ret = parse_max_pkt_len(optarg);
+ if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) {
+ fprintf(stderr,
+ "invalid maximum packet length\n");
print_usage(prgname);
return -1;
}
+ port_conf.rxmode.max_rx_pkt_len = ret;
}
+ break;
+ }
- if (!strncmp(lgopts[option_index].name,
- CMD_LINE_OPT_PARSE_PTYPE,
- sizeof(CMD_LINE_OPT_PARSE_PTYPE))) {
- printf("soft parse-ptype is enabled\n");
- parse_ptype = 1;
+ case CMD_LINE_OPT_HASH_ENTRY_NUM_NUM:
+ ret = parse_hash_entry_number(optarg);
+ if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
+ hash_entry_number = ret;
+ } else {
+ fprintf(stderr, "invalid hash entry number\n");
+ print_usage(prgname);
+ return -1;
}
+ break;
+ case CMD_LINE_OPT_PARSE_PTYPE_NUM:
+ printf("soft parse-ptype is enabled\n");
+ parse_ptype = 1;
break;
default:
/* If both LPM and EM are selected, return error. */
if (l3fwd_lpm_on && l3fwd_em_on) {
- printf("%s\n", str12);
+ fprintf(stderr, "LPM and EM are mutually exclusive, select only one\n");
return -1;
}
* as default match.
*/
if (!l3fwd_lpm_on && !l3fwd_em_on) {
+ fprintf(stderr, "LPM or EM none selected, default LPM on\n");
l3fwd_lpm_on = 1;
- printf("%s\n", str13);
}
/*
argv[optind-1] = prgname;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
return ret;
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("\nChecking link status");
if (force_quit)
return;
all_ports_up = 1;
- for (portid = 0; portid < port_num; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if (force_quit)
return;
if ((port_mask & (1 << portid)) == 0)
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. Speed %u Mbps -%s\n",
+ portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
}
static int
-prepare_ptype_parser(uint8_t portid, uint16_t queueid)
+prepare_ptype_parser(uint16_t portid, uint16_t queueid)
{
if (parse_ptype) {
printf("Port %d: softly parse packet type info\n", portid);
struct rte_eth_txconf *txconf;
int ret;
unsigned nb_ports;
- uint16_t queueid;
+ uint16_t queueid, portid;
unsigned lcore_id;
uint32_t n_tx_queue, nb_lcores;
- uint8_t portid, nb_rx_queue, queue, socketid;
+ uint8_t nb_rx_queue, queue, socketid;
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
- nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
+ nb_ports = rte_eth_dev_count_avail();
- if (check_port_config(nb_ports) < 0)
+ if (check_port_config() < 0)
rte_exit(EXIT_FAILURE, "check_port_config failed\n");
nb_lcores = rte_lcore_count();
setup_l3fwd_lookup_tables();
/* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
+ struct rte_eth_conf local_port_conf = port_conf;
+
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);
n_tx_queue = MAX_TX_QUEUE_PER_PORT;
printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
nb_rx_queue, (unsigned)n_tx_queue );
+
+ rte_eth_dev_info_get(portid, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+ dev_info.flow_type_rss_offloads;
+ if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+ port_conf.rx_adv_conf.rss_conf.rss_hf) {
+ printf("Port %u modified RSS hash function based on hardware support,"
+ "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+ portid,
+ port_conf.rx_adv_conf.rss_conf.rss_hf,
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+ }
+
ret = rte_eth_dev_configure(portid, nb_rx_queue,
- (uint16_t)n_tx_queue, &port_conf);
+ (uint16_t)n_tx_queue, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE,
"Cannot configure device: err=%d, port=%d\n",
ret, portid);
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+ &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot adjust number of descriptors: err=%d, "
+ "port=%d\n", ret, portid);
+
rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
print_ethaddr(" Address:", &ports_eth_addr[portid]);
printf(", ");
printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
fflush(stdout);
- rte_eth_dev_info_get(portid, &dev_info);
txconf = &dev_info.default_txconf;
- if (port_conf.rxmode.jumbo_frame)
- txconf->txq_flags = 0;
+ txconf->offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
socketid, txconf);
if (ret < 0)
fflush(stdout);
/* init RX queues */
for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ struct rte_eth_dev *dev;
+ struct rte_eth_conf *conf;
+ struct rte_eth_rxconf rxq_conf;
+
portid = qconf->rx_queue_list[queue].port_id;
queueid = qconf->rx_queue_list[queue].queue_id;
+ dev = &rte_eth_devices[portid];
+ conf = &dev->data->dev_conf;
if (numa_on)
socketid =
printf("rxq=%d,%d,%d ", portid, queueid, socketid);
fflush(stdout);
+ rte_eth_dev_info_get(portid, &dev_info);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = conf->rxmode.offloads;
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
socketid,
- NULL,
+ &rxq_conf,
pktmbuf_pool[socketid]);
if (ret < 0)
rte_exit(EXIT_FAILURE,
printf("\n");
/* start ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
}
- check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
+ check_all_ports_link_status(enabled_port_mask);
ret = 0;
/* launch per-lcore init on every lcore */
}
/* stop ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
printf("Closing port %d...", portid);
Code Review / deb_dpdk.git / blobdiff