#include <stdio.h>
#include <sys/queue.h>
+#include <rte_config.h>
#include <rte_log.h>
__attribute__((format(printf, 2, 0)))
va_start(ap, fmt);
- char buffer[vsnprintf(NULL, 0, fmt, ap) + 1];
+ {
+ char buffer[vsnprintf(NULL, 0, fmt, ap) + 1];
- va_end(ap);
+ va_end(ap);
- va_start(ap, fmt);
- vsnprintf(buffer, sizeof(buffer), fmt, ap);
- va_end(ap);
+ va_start(ap, fmt);
+ vsnprintf(buffer, sizeof(buffer), fmt, ap);
+ va_end(ap);
- rte_log(RTE_LOG_ERR, RTE_LOGTYPE_PMD, "%s: %s", func_name, buffer);
+ rte_log(RTE_LOG_ERR, RTE_LOGTYPE_PMD, "%s: %s",
+ func_name, buffer);
+ }
}
+/*
+ * Enable RTE_PMD_DEBUG_TRACE() when at least one component relying on the
+ * RTE_*_RET() macros defined below is compiled in debug mode.
+ */
+#if defined(RTE_LIBRTE_ETHDEV_DEBUG) || \
+ defined(RTE_LIBRTE_CRYPTODEV_DEBUG) || \
+ defined(RTE_LIBRTE_EVENTDEV_DEBUG)
+#define RTE_PMD_DEBUG_TRACE(...) \
+ rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...) (void)0
+#endif
+
/* Macros for checking for restricting functions to primary instance only */
#define RTE_PROC_PRIMARY_OR_ERR_RET(retval) do { \
if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
} \
} while (0)
-
-/** Double linked list of device drivers. */
-TAILQ_HEAD(rte_driver_list, rte_driver);
-
/**
- * Initialization function called for each device driver once.
+ * Device driver.
*/
-typedef int (rte_dev_init_t)(const char *name, const char *args);
+enum rte_kernel_driver {
+ RTE_KDRV_UNKNOWN = 0,
+ RTE_KDRV_IGB_UIO,
+ RTE_KDRV_VFIO,
+ RTE_KDRV_UIO_GENERIC,
+ RTE_KDRV_NIC_UIO,
+ RTE_KDRV_NONE,
+};
/**
- * Uninitilization function called for each device driver once.
+ * Device policies.
*/
-typedef int (rte_dev_uninit_t)(const char *name);
+enum rte_dev_policy {
+ RTE_DEV_WHITELISTED,
+ RTE_DEV_BLACKLISTED,
+};
/**
- * Driver type enumeration
+ * A generic memory resource representation.
*/
-enum pmd_type {
- PMD_VDEV = 0,
- PMD_PDEV = 1,
+struct rte_mem_resource {
+ uint64_t phys_addr; /**< Physical address, 0 if not resource. */
+ uint64_t len; /**< Length of the resource. */
+ void *addr; /**< Virtual address, NULL when not mapped. */
};
/**
*/
struct rte_driver {
TAILQ_ENTRY(rte_driver) next; /**< Next in list. */
- enum pmd_type type; /**< PMD Driver type */
const char *name; /**< Driver name. */
- rte_dev_init_t *init; /**< Device init. function. */
- rte_dev_uninit_t *uninit; /**< Device uninit. function. */
+ const char *alias; /**< Driver alias. */
+};
+
+/*
+ * Internal identifier length
+ * Sufficiently large to allow for UUID or PCI address
+ */
+#define RTE_DEV_NAME_MAX_LEN 64
+
+/**
+ * A structure describing a generic device.
+ */
+struct rte_device {
+ TAILQ_ENTRY(rte_device) next; /**< Next device */
+ const char *name; /**< Device name */
+ const struct rte_driver *driver;/**< Associated driver */
+ int numa_node; /**< NUMA node connection */
+ struct rte_devargs *devargs; /**< Device user arguments */
};
/**
- * Register a device driver.
+ * Attach a device to a registered driver.
*
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be registered.
+ * @param name
+ * The device name, that refers to a pci device (or some private
+ * way of designating a vdev device). Based on this device name, eal
+ * will identify a driver capable of handling it and pass it to the
+ * driver probing function.
+ * @param devargs
+ * Device arguments to be passed to the driver.
+ * @return
+ * 0 on success, negative on error.
*/
-void rte_eal_driver_register(struct rte_driver *driver);
+int rte_eal_dev_attach(const char *name, const char *devargs);
/**
- * Unregister a device driver.
+ * Detach a device from its driver.
*
- * @param driver
- * A pointer to a rte_dev structure describing the driver
- * to be unregistered.
+ * @param dev
+ * A pointer to a rte_device structure.
+ * @return
+ * 0 on success, negative on error.
*/
-void rte_eal_driver_unregister(struct rte_driver *driver);
+int rte_eal_dev_detach(struct rte_device *dev);
/**
- * Initalize all the registered drivers in this process
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Hotplug add a given device to a specific bus.
+ *
+ * @param busname
+ * The bus name the device is added to.
+ * @param devname
+ * The device name. Based on this device name, eal will identify a driver
+ * capable of handling it and pass it to the driver probing function.
+ * @param devargs
+ * Device arguments to be passed to the driver.
+ * @return
+ * 0 on success, negative on error.
*/
-int rte_eal_dev_init(void);
+int rte_eal_hotplug_add(const char *busname, const char *devname,
+ const char *devargs);
/**
- * Initialize a driver specified by name.
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
*
- * @param name
- * The pointer to a driver name to be initialized.
- * @param args
- * The pointer to arguments used by driver initialization.
+ * Hotplug remove a given device from a specific bus.
+ *
+ * @param busname
+ * The bus name the device is removed from.
+ * @param devname
+ * The device name being removed.
* @return
- * 0 on success, negative on error
+ * 0 on success, negative on error.
*/
-int rte_eal_vdev_init(const char *name, const char *args);
+int rte_eal_hotplug_remove(const char *busname, const char *devname);
/**
- * Uninitalize a driver specified by name.
+ * Device comparison function.
+ *
+ * This type of function is used to compare an rte_device with arbitrary
+ * data.
+ *
+ * @param dev
+ * Device handle.
+ *
+ * @param data
+ * Data to compare against. The type of this parameter is determined by
+ * the kind of comparison performed by the function.
*
- * @param name
- * The pointer to a driver name to be initialized.
* @return
- * 0 on success, negative on error
+ * 0 if the device matches the data.
+ * !0 if the device does not match.
+ * <0 if ordering is possible and the device is lower than the data.
+ * >0 if ordering is possible and the device is greater than the data.
*/
-int rte_eal_vdev_uninit(const char *name);
+typedef int (*rte_dev_cmp_t)(const struct rte_device *dev, const void *data);
-#define PMD_REGISTER_DRIVER(d)\
-void devinitfn_ ##d(void);\
-void __attribute__((constructor, used)) devinitfn_ ##d(void)\
-{\
- rte_eal_driver_register(&d);\
-}
+#define RTE_PMD_EXPORT_NAME_ARRAY(n, idx) n##idx[]
+
+#define RTE_PMD_EXPORT_NAME(name, idx) \
+static const char RTE_PMD_EXPORT_NAME_ARRAY(this_pmd_name, idx) \
+__attribute__((used)) = RTE_STR(name)
+
+#define DRV_EXP_TAG(name, tag) __##name##_##tag
+
+#define RTE_PMD_REGISTER_PCI_TABLE(name, table) \
+static const char DRV_EXP_TAG(name, pci_tbl_export)[] __attribute__((used)) = \
+RTE_STR(table)
+
+#define RTE_PMD_REGISTER_PARAM_STRING(name, str) \
+static const char DRV_EXP_TAG(name, param_string_export)[] \
+__attribute__((used)) = str
+
+/**
+ * Advertise the list of kernel modules required to run this driver
+ *
+ * This string lists the kernel modules required for the devices
+ * associated to a PMD. The format of each line of the string is:
+ * "<device-pattern> <kmod-expression>".
+ *
+ * The possible formats for the device pattern are:
+ * "*" all devices supported by this driver
+ * "pci:*" all PCI devices supported by this driver
+ * "pci:v8086:d*:sv*:sd*" all PCI devices supported by this driver
+ * whose vendor id is 0x8086.
+ *
+ * The format of the kernel modules list is a parenthesed expression
+ * containing logical-and (&) and logical-or (|).
+ *
+ * The device pattern and the kmod expression are separated by a space.
+ *
+ * Example:
+ * - "* igb_uio | uio_pci_generic | vfio"
+ */
+#define RTE_PMD_REGISTER_KMOD_DEP(name, str) \
+static const char DRV_EXP_TAG(name, kmod_dep_export)[] \
+__attribute__((used)) = str
#ifdef __cplusplus
}
#endif
-#endif /* _RTE_VDEV_H_ */
+#endif /* _RTE_DEV_H_ */
Code Review / deb_dpdk.git / blobdiff