static struct flock wr_lock = {
.l_type = F_WRLCK,
.l_whence = SEEK_SET,
- .l_start = offsetof(struct rte_mem_config, memseg),
- .l_len = sizeof(early_mem_config.memseg),
+ .l_start = offsetof(struct rte_mem_config, memsegs),
+ .l_len = sizeof(early_mem_config.memsegs),
};
/* Address of global and public configuration */
/* used by rte_rdtsc() */
int rte_cycles_vmware_tsc_map;
+/* platform-specific runtime dir */
+static char runtime_dir[PATH_MAX];
+
+static const char *default_runtime_dir = "/var/run";
+
+int
+eal_create_runtime_dir(void)
+{
+ const char *directory = default_runtime_dir;
+ const char *xdg_runtime_dir = getenv("XDG_RUNTIME_DIR");
+ const char *fallback = "/tmp";
+ char tmp[PATH_MAX];
+ int ret;
+
+ if (getuid() != 0) {
+ /* try XDG path first, fall back to /tmp */
+ if (xdg_runtime_dir != NULL)
+ directory = xdg_runtime_dir;
+ else
+ directory = fallback;
+ }
+ /* create DPDK subdirectory under runtime dir */
+ ret = snprintf(tmp, sizeof(tmp), "%s/dpdk", directory);
+ if (ret < 0 || ret == sizeof(tmp)) {
+ RTE_LOG(ERR, EAL, "Error creating DPDK runtime path name\n");
+ return -1;
+ }
+
+ /* create prefix-specific subdirectory under DPDK runtime dir */
+ ret = snprintf(runtime_dir, sizeof(runtime_dir), "%s/%s",
+ tmp, internal_config.hugefile_prefix);
+ if (ret < 0 || ret == sizeof(runtime_dir)) {
+ RTE_LOG(ERR, EAL, "Error creating prefix-specific runtime path name\n");
+ return -1;
+ }
+
+ /* create the path if it doesn't exist. no "mkdir -p" here, so do it
+ * step by step.
+ */
+ ret = mkdir(tmp, 0700);
+ if (ret < 0 && errno != EEXIST) {
+ RTE_LOG(ERR, EAL, "Error creating '%s': %s\n",
+ tmp, strerror(errno));
+ return -1;
+ }
+
+ ret = mkdir(runtime_dir, 0700);
+ if (ret < 0 && errno != EEXIST) {
+ RTE_LOG(ERR, EAL, "Error creating '%s': %s\n",
+ runtime_dir, strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+const char *
+eal_get_runtime_dir(void)
+{
+ return runtime_dir;
+}
+
/* Return user provided mbuf pool ops name */
const char * __rte_experimental
rte_eal_mbuf_user_pool_ops(void)
" --"OPT_BASE_VIRTADDR" Base virtual address\n"
" --"OPT_CREATE_UIO_DEV" Create /dev/uioX (usually done by hotplug)\n"
" --"OPT_VFIO_INTR" Interrupt mode for VFIO (legacy|msi|msix)\n"
+ " --"OPT_LEGACY_MEM" Legacy memory mode (no dynamic allocation, contiguous segments)\n"
+ " --"OPT_SINGLE_FILE_SEGMENTS" Put all hugepage memory in single files\n"
"\n");
/* Allow the application to print its usage message too if hook is set */
if ( rte_application_usage_hook ) {
break;
case OPT_MBUF_POOL_OPS_NAME_NUM:
- internal_config.user_mbuf_pool_ops_name = optarg;
+ internal_config.user_mbuf_pool_ops_name =
+ strdup(optarg);
break;
default:
return ret;
}
+static int
+check_socket(const struct rte_memseg_list *msl, void *arg)
+{
+ int *socket_id = arg;
+
+ return *socket_id == msl->socket_id;
+}
+
static void
eal_check_mem_on_local_socket(void)
{
- const struct rte_memseg *ms;
- int i, socket_id;
+ int socket_id;
socket_id = rte_lcore_to_socket_id(rte_config.master_lcore);
- ms = rte_eal_get_physmem_layout();
-
- for (i = 0; i < RTE_MAX_MEMSEG; i++)
- if (ms[i].socket_id == socket_id &&
- ms[i].len > 0)
- return;
-
- RTE_LOG(WARNING, EAL, "WARNING: Master core has no "
- "memory on local socket!\n");
+ if (rte_memseg_list_walk(check_socket, &socket_id) == 0)
+ RTE_LOG(WARNING, EAL, "WARNING: Master core has no memory on local socket!\n");
}
static int
/* ALL shared mem_config related INIT DONE */
if (rte_config.process_type == RTE_PROC_PRIMARY)
rte_config.mem_config->magic = RTE_MAGIC;
+
+ internal_config.init_complete = 1;
}
/*
#ifdef VFIO_PRESENT
static int rte_eal_vfio_setup(void)
{
- int vfio_enabled = 0;
-
if (rte_vfio_enable("vfio"))
return -1;
- vfio_enabled = rte_vfio_is_enabled("vfio");
-
- if (vfio_enabled) {
-
- /* if we are primary process, create a thread to communicate with
- * secondary processes. the thread will use a socket to wait for
- * requests from secondary process to send open file descriptors,
- * because VFIO does not allow multiple open descriptors on a group or
- * VFIO container.
- */
- if (internal_config.process_type == RTE_PROC_PRIMARY &&
- vfio_mp_sync_setup() < 0)
- return -1;
- }
return 0;
}
return -1;
}
+ /* create runtime data directory */
+ if (eal_create_runtime_dir() < 0) {
+ rte_eal_init_alert("Cannot create runtime directory\n");
+ rte_errno = EACCES;
+ return -1;
+ }
+
if (eal_plugins_init() < 0) {
rte_eal_init_alert("Cannot init plugins\n");
rte_errno = EINVAL;
return -1;
}
+ rte_config_init();
+
+ /* Put mp channel init before bus scan so that we can init the vdev
+ * bus through mp channel in the secondary process before the bus scan.
+ */
+ if (rte_mp_channel_init() < 0) {
+ rte_eal_init_alert("failed to init mp channel\n");
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ rte_errno = EFAULT;
+ return -1;
+ }
+ }
+
if (rte_bus_scan()) {
rte_eal_init_alert("Cannot scan the buses for devices\n");
rte_errno = ENODEV;
"KNI module inserted\n");
}
- if (internal_config.no_hugetlbfs == 0 &&
- internal_config.process_type != RTE_PROC_SECONDARY &&
- eal_hugepage_info_init() < 0) {
- rte_eal_init_alert("Cannot get hugepage information.");
- rte_errno = EACCES;
- rte_atomic32_clear(&run_once);
- return -1;
+ if (internal_config.no_hugetlbfs == 0) {
+ /* rte_config isn't initialized yet */
+ ret = internal_config.process_type == RTE_PROC_PRIMARY ?
+ eal_hugepage_info_init() :
+ eal_hugepage_info_read();
+ if (ret < 0) {
+ rte_eal_init_alert("Cannot get hugepage information.");
+ rte_errno = EACCES;
+ rte_atomic32_clear(&run_once);
+ return -1;
+ }
}
if (internal_config.memory == 0 && internal_config.force_sockets == 0) {
rte_srand(rte_rdtsc());
- rte_config_init();
-
if (rte_eal_log_init(logid, internal_config.syslog_facility) < 0) {
rte_eal_init_alert("Cannot init logging.");
rte_errno = ENOMEM;
return -1;
}
- if (rte_mp_channel_init() < 0) {
- rte_eal_init_alert("failed to init mp channel\n");
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- rte_errno = EFAULT;
- return -1;
- }
- }
-
#ifdef VFIO_PRESENT
if (rte_eal_vfio_setup() < 0) {
rte_eal_init_alert("Cannot init VFIO\n");
return -1;
}
#endif
+ /* in secondary processes, memory init may allocate additional fbarrays
+ * not present in primary processes, so to avoid any potential issues,
+ * initialize memzones first.
+ */
+ if (rte_eal_memzone_init() < 0) {
+ rte_eal_init_alert("Cannot init memzone\n");
+ rte_errno = ENODEV;
+ return -1;
+ }
if (rte_eal_memory_init() < 0) {
rte_eal_init_alert("Cannot init memory\n");
/* the directories are locked during eal_hugepage_info_init */
eal_hugedirs_unlock();
- if (rte_eal_memzone_init() < 0) {
- rte_eal_init_alert("Cannot init memzone\n");
+ if (rte_eal_malloc_heap_init() < 0) {
+ rte_eal_init_alert("Cannot init malloc heap\n");
rte_errno = ENODEV;
return -1;
}
eal_thread_init_master(rte_config.master_lcore);
- ret = eal_thread_dump_affinity(cpuset, RTE_CPU_AFFINITY_STR_LEN);
+ ret = eal_thread_dump_affinity(cpuset, sizeof(cpuset));
RTE_LOG(DEBUG, EAL, "Master lcore %u is ready (tid=%x;cpuset=[%s%s])\n",
rte_config.master_lcore, (int)thread_id, cpuset,
rte_panic("Cannot create thread\n");
/* Set thread_name for aid in debugging. */
- snprintf(thread_name, RTE_MAX_THREAD_NAME_LEN,
+ snprintf(thread_name, sizeof(thread_name),
"lcore-slave-%d", i);
ret = rte_thread_setname(lcore_config[i].thread_id,
thread_name);
return -1;
}
+#ifdef VFIO_PRESENT
+ /* Register mp action after probe() so that we got enough info */
+ if (rte_vfio_is_enabled("vfio") && vfio_mp_sync_setup() < 0)
+ return -1;
+#endif
+
/* initialize default service/lcore mappings and start running. Ignore
* -ENOTSUP, as it indicates no service coremask passed to EAL.
*/
Code Review / deb_dpdk.git / blobdiff