New upstream version 18.05

[deb_dpdk.git] / lib / librte_eal / linuxapp / kni / ethtool / igb / e1000_osdep.h

diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h b/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h
deleted file mode 100644 (file)
index 3228100..0000000
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-/* glue for the OS independent part of e1000
- * includes register access macros
- */
-
-#ifndef _E1000_OSDEP_H_
-#define _E1000_OSDEP_H_
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/sched.h>
-#include "kcompat.h"
-
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-#define usec_delay(x) udelay(x)
-#define usec_delay_irq(x) udelay(x)
-#ifndef msec_delay
-#define msec_delay(x) do { \
-       /* Don't mdelay in interrupt context! */ \
-       if (in_interrupt()) \
-               BUG(); \
-       else \
-               msleep(x); \
-} while (0)
-
-/* Some workarounds require millisecond delays and are run during interrupt
- * context.  Most notably, when establishing link, the phy may need tweaking
- * but cannot process phy register reads/writes faster than millisecond
- * intervals...and we establish link due to a "link status change" interrupt.
- */
-#define msec_delay_irq(x) mdelay(x)
-#endif
-
-#define PCI_COMMAND_REGISTER   PCI_COMMAND
-#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
-#define ETH_ADDR_LEN           ETH_ALEN
-
-#ifdef __BIG_ENDIAN
-#define E1000_BIG_ENDIAN __BIG_ENDIAN
-#endif
-
-
-#ifdef DEBUG
-#define DEBUGOUT(S) printk(KERN_DEBUG S)
-#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A)
-#else
-#define DEBUGOUT(S)
-#define DEBUGOUT1(S, A...)
-#endif
-
-#ifdef DEBUG_FUNC
-#define DEBUGFUNC(F) DEBUGOUT(F "\n")
-#else
-#define DEBUGFUNC(F)
-#endif
-#define DEBUGOUT2 DEBUGOUT1
-#define DEBUGOUT3 DEBUGOUT2
-#define DEBUGOUT7 DEBUGOUT3
-
-#define E1000_REGISTER(a, reg) reg
-
-#define E1000_WRITE_REG(a, reg, value) ( \
-    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg))))
-
-#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg)))
-
-#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
-    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))))
-
-#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
-    readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))
-
-#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
-#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
-
-#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
-    writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))))
-
-#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
-    readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))
-
-#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
-    writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))))
-
-#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
-    readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))
-
-#define E1000_WRITE_REG_IO(a, reg, offset) do { \
-    outl(reg, ((a)->io_base));                  \
-    outl(offset, ((a)->io_base + 4));      } while (0)
-
-#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS)
-
-#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
-    writel((value), ((a)->flash_address + reg)))
-
-#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \
-    writew((value), ((a)->flash_address + reg)))
-
-#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg))
-
-#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg))
-
-#endif /* _E1000_OSDEP_H_ */