/**
* Bits 45:48 used for the tunnel type.
- * When doing Tx offload like TSO or checksum, the HW needs to configure the
- * tunnel type into the HW descriptors.
+ * The tunnel type must be specified for TSO or checksum on the inner part
+ * of tunnel packets.
+ * These flags can be used with PKT_TX_TCP_SEG for TSO, or PKT_TX_xxx_CKSUM.
+ * The mbuf fields for inner and outer header lengths are required:
+ * outer_l2_len, outer_l3_len, l2_len, l3_len, l4_len and tso_segsz for TSO.
*/
#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45)
#define PKT_TX_TUNNEL_GRE (0x2ULL << 45)
#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45)
#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45)
-/**< TX packet with MPLS-in-UDP RFC 7510 header. */
+/** TX packet with MPLS-in-UDP RFC 7510 header. */
#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
/* add new TX TUNNEL type here */
#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
* - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
* PKT_TX_TCP_CKSUM)
* - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
- * to 0 in the packet
+ * - if it's IPv4, set the PKT_TX_IP_CKSUM flag
* - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- * - calculate the pseudo header checksum without taking ip_len in account,
- * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and
- * rte_ipv6_phdr_cksum() that can be used as helpers.
*/
#define PKT_TX_TCP_SEG (1ULL << 50)
* - fill l2_len and l3_len in mbuf
* - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
* - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- * - calculate the pseudo header checksum and set it in the L4 header (only
- * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum().
- * For SCTP, set the crc field to 0.
*/
#define PKT_TX_L4_NO_CKSUM (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
#define PKT_TX_TCP_CKSUM (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
* Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
* also be set by the application, although a PMD will only check
* PKT_TX_IP_CKSUM.
- * - set the IP checksum field in the packet to 0
* - fill the mbuf offload information: l2_len, l3_len
*/
#define PKT_TX_IP_CKSUM (1ULL << 54)
/**
* Offload the IP checksum of an external header in the hardware. The
- * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh
- * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the
- * packet must be set to 0.
- * - set the outer IP checksum field in the packet to 0
+ * flag PKT_TX_OUTER_IPV4 should also be set by the application, although
+ * a PMD will only check PKT_TX_OUTER_IP_CKSUM.
* - fill the mbuf offload information: outer_l2_len, outer_l3_len
*/
#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58)
* which can be set for packet.
*/
#define PKT_TX_OFFLOAD_MASK ( \
+ PKT_TX_OUTER_IPV6 | \
+ PKT_TX_OUTER_IPV4 | \
+ PKT_TX_OUTER_IP_CKSUM | \
+ PKT_TX_VLAN_PKT | \
+ PKT_TX_IPV6 | \
+ PKT_TX_IPV4 | \
PKT_TX_IP_CKSUM | \
PKT_TX_L4_MASK | \
- PKT_TX_OUTER_IP_CKSUM | \
- PKT_TX_TCP_SEG | \
PKT_TX_IEEE1588_TMST | \
+ PKT_TX_TCP_SEG | \
PKT_TX_QINQ_PKT | \
- PKT_TX_VLAN_PKT | \
PKT_TX_TUNNEL_MASK | \
PKT_TX_MACSEC | \
PKT_TX_SEC_OFFLOAD)
static inline void
rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value)
{
- rte_atomic16_set(&m->refcnt_atomic, new_value);
+ rte_atomic16_set(&m->refcnt_atomic, (int16_t)new_value);
}
/* internal */
* reference counter can occur.
*/
if (likely(rte_mbuf_refcnt_read(m) == 1)) {
- rte_mbuf_refcnt_set(m, 1 + value);
- return 1 + value;
+ ++value;
+ rte_mbuf_refcnt_set(m, (uint16_t)value);
+ return (uint16_t)value;
}
return __rte_mbuf_refcnt_update(m, value);
*/
static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
{
- m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ m->data_off = (uint16_t)RTE_MIN((uint16_t)RTE_PKTMBUF_HEADROOM,
+ (uint16_t)m->buf_len);
}
/**
{
struct rte_mbuf *md = rte_mbuf_from_indirect(m);
struct rte_mempool *mp = m->pool;
- uint32_t mbuf_size, buf_len, priv_size;
+ uint32_t mbuf_size, buf_len;
+ uint16_t priv_size;
priv_size = rte_pktmbuf_priv_size(mp);
- mbuf_size = sizeof(struct rte_mbuf) + priv_size;
+ mbuf_size = (uint32_t)(sizeof(struct rte_mbuf) + priv_size);
buf_len = rte_pktmbuf_data_room_size(mp);
m->priv_size = priv_size;
if (unlikely(len > rte_pktmbuf_headroom(m)))
return NULL;
- m->data_off -= len;
+ /* NB: elaborating the subtraction like this instead of using
+ * -= allows us to ensure the result type is uint16_t
+ * avoiding compiler warnings on gcc 8.1 at least */
+ m->data_off = (uint16_t)(m->data_off - len);
m->data_len = (uint16_t)(m->data_len + len);
m->pkt_len = (m->pkt_len + len);
if (unlikely(len > m->data_len))
return NULL;
+ /* NB: elaborating the addition like this instead of using
+ * += allows us to ensure the result type is uint16_t
+ * avoiding compiler warnings on gcc 8.1 at least */
m->data_len = (uint16_t)(m->data_len - len);
- m->data_off += len;
+ m->data_off = (uint16_t)(m->data_off + len);
m->pkt_len = (m->pkt_len - len);
return (char *)m->buf_addr + m->data_off;
}
cur_tail = rte_pktmbuf_lastseg(head);
cur_tail->next = tail;
- /* accumulate number of segments and total length. */
- head->nb_segs += tail->nb_segs;
+ /* accumulate number of segments and total length.
+ * NB: elaborating the addition like this instead of using
+ * -= allows us to ensure the result type is uint16_t
+ * avoiding compiler warnings on gcc 8.1 at least */
+ head->nb_segs = (uint16_t)(head->nb_segs + tail->nb_segs);
head->pkt_len += tail->pkt_len;
/* pkt_len is only set in the head */
return 0;
if (ol_flags & PKT_TX_OUTER_IP_CKSUM)
- inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
+ /* NB: elaborating the addition like this instead of using
+ * += gives the result uint64_t type instead of int,
+ * avoiding compiler warnings on gcc 8.1 at least */
+ inner_l3_offset = inner_l3_offset + m->outer_l2_len +
+ m->outer_l3_len;
/* Headers are fragmented */
if (rte_pktmbuf_data_len(m) < inner_l3_offset + m->l3_len + m->l4_len)
static inline int
rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
{
- int seg_len, copy_len;
+ size_t seg_len, copy_len;
struct rte_mbuf *m;
struct rte_mbuf *m_next;
char *buffer;