-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
pci_id="0x154c"
tg_netdev=(enp5s2 enp5s3 enp5s4 enp5s5
enp5s6 enp5s7 enp5s8 enp5s9)
- tg_netdev+=(enp8s2 enp8s3 enp8s4 enp8s5
- enp8s6 enp8s7 enp8s8 enp8s9)
- tg_netdev+=(enp8s10 enp8s11 enp8s12 enp8s13
- enp8s14 enp8s15 enp8s16 enp8s17)
- dut1_netdev=(enp133s2 enp133s3 enp133s4 enp133s5
- enp133s6 enp133s7 enp133s8 enp133s9)
- dut1_netdev+=(enp133s10 enp133s11 enp133s12 enp133s13
- enp133s14 enp133s15 enp133s16 enp133s17)
- dut1_netdev+=(enp5s10 enp5s11 enp5s12 enp5s13
- enp5s14 enp5s15 enp5s16 enp5s17)
+ tg_netdev+=(enp5s10 enp5s11 enp5s12 enp5s13
+ enp5s14 enp5s15 enp5s16 enp5s17)
+ dut1_netdev=(enp145s2 enp145s3 enp145s4 enp145s5
+ enp145s6 enp145s7 enp145s8 enp145s9)
+ dut1_netdev+=(enp145s10 enp145s11 enp145s12 enp145s13
+ enp145s14 enp145s15 enp145s16 enp145s17)
;;
"1n_vbox")
# Add Intel Corporation 82545EM Gigabit Ethernet Controller to the
# whitelist.
pci_id="0x100f"
- tg_netdev=(enpTGa enpTGb)
- dut1_netdev=(enpSUTa enpSUTb)
+ tg_netdev=(enp0s8 enp0s9)
+ dut1_netdev=(enp0s16 enp0s17)
;;
*)
die "Unknown specification: ${case_text}!"
TG_PCIDEVS=()
TG_NETMACS=()
TG_DRIVERS=()
+ TG_VLANS=()
# DUT1 side of connections.
DUT1_NETDEVS=()
DUT1_PCIDEVS=()
DUT1_NETMACS=()
DUT1_DRIVERS=()
+ DUT1_VLANS=()
# Find the first ${device_count} number of available TG Linux network
# VF device names. Only allowed VF PCI IDs are filtered.
get_pci_addr
get_mac_addr
get_krn_driver
+ get_vlan_filter
TG_PCIDEVS+=(${PCI_ADDR})
TG_NETMACS+=(${MAC_ADDR})
TG_DRIVERS+=(${KRN_DRIVER})
+ TG_VLANS+=(${VLAN_ID})
done
for NETDEV in "${DUT1_NETDEVS[@]}"; do
get_pci_addr
get_mac_addr
get_krn_driver
+ get_vlan_filter
DUT1_PCIDEVS+=(${PCI_ADDR})
DUT1_NETMACS+=(${MAC_ADDR})
DUT1_DRIVERS+=(${KRN_DRIVER})
+ DUT1_VLANS+=(${VLAN_ID})
done
# We need at least two interfaces for TG/DUT1 for building topology.
}
+function get_vlan_filter () {
+
+ # Get VLAN stripping filter from PF searched by mac adress.
+ #
+ # Variables read:
+ # - MAC_ADDR - MAC address of VF.
+ # Variables set:
+ # - VLAN_ID - VLAN ids.
+
+ set -exuo pipefail
+
+ # Sed regular expression pattern.
+ exp="s/^.*vlan ([[:digit:]]+).*$/\1/"
+ VLAN_ID=$(ip link | grep vlan | grep ${MAC_ADDR} | sed -re "${exp}") || true
+ VLAN_ID="${VLAN_ID:-0}"
+}
+
+
function installed () {
# Check if the given utility is installed. Fail if not installed.
DCR_UUIDS+=([dut1]="${CSIT_DUT1_UUID}")
TG_PCIDEVS=("${CSIT_TG_INTERFACES_PORT1_PCI}")
TG_DRIVERS=("${CSIT_TG_INTERFACES_PORT1_DRV}")
+ TG_VLANS+=("${CSIT_TG_INTERFACES_PORT1_VLAN}")
TG_PCIDEVS+=("${CSIT_TG_INTERFACES_PORT2_PCI}")
TG_DRIVERS+=("${CSIT_TG_INTERFACES_PORT2_DRV}")
+ TG_VLANS+=("${CSIT_TG_INTERFACES_PORT2_VLAN}")
DUT1_PCIDEVS=("${CSIT_DUT1_INTERFACES_PORT1_PCI}")
DUT1_DRIVERS=("${CSIT_DUT1_INTERFACES_PORT1_DRV}")
+ DUT1_VLANS+=("${CSIT_DUT1_INTERFACES_PORT1_VLAN}")
DUT1_PCIDEVS+=("${CSIT_DUT1_INTERFACES_PORT2_PCI}")
DUT1_DRIVERS+=("${CSIT_DUT1_INTERFACES_PORT2_DRV}")
+ DUT1_VLANS+=("${CSIT_DUT1_INTERFACES_PORT2_VLAN}")
}
CSIT_TG_INTERFACES_PORT1_MAC="${TG_NETMACS[0]}"
CSIT_TG_INTERFACES_PORT1_PCI="${TG_PCIDEVS[0]}"
CSIT_TG_INTERFACES_PORT1_DRV="${TG_DRIVERS[0]}"
+ CSIT_TG_INTERFACES_PORT1_VLAN="${TG_VLANS[0]}"
CSIT_TG_INTERFACES_PORT2_MAC="${TG_NETMACS[1]}"
CSIT_TG_INTERFACES_PORT2_PCI="${TG_PCIDEVS[1]}"
CSIT_TG_INTERFACES_PORT2_DRV="${TG_DRIVERS[1]}"
+ CSIT_TG_INTERFACES_PORT2_VLAN="${TG_VLANS[1]}"
CSIT_DUT1_INTERFACES_PORT1_MAC="${DUT1_NETMACS[0]}"
CSIT_DUT1_INTERFACES_PORT1_PCI="${DUT1_PCIDEVS[0]}"
CSIT_DUT1_INTERFACES_PORT1_DRV="${DUT1_DRIVERS[0]}"
+ CSIT_DUT1_INTERFACES_PORT1_VLAN="${DUT1_VLANS[0]}"
CSIT_DUT1_INTERFACES_PORT2_MAC="${DUT1_NETMACS[1]}"
CSIT_DUT1_INTERFACES_PORT2_PCI="${DUT1_PCIDEVS[1]}"
CSIT_DUT1_INTERFACES_PORT2_DRV="${DUT1_DRIVERS[1]}"
+ CSIT_DUT1_INTERFACES_PORT2_VLAN="${DUT1_VLANS[1]}"
set +a
}
# Override access to PCI bus by attaching a filesystem mount to the
# container.
dcr_stc_params+="--mount type=tmpfs,destination=/sys/bus/pci/devices "
- # Mount vfio to be able to bind to see binded interfaces. We cannot use
- # --device=/dev/vfio as this does not see newly binded interfaces.
+ # Mount vfio to be able to bind to see bound interfaces. We cannot use
+ # --device=/dev/vfio as this does not see newly bound interfaces.
dcr_stc_params+="--volume /dev/vfio:/dev/vfio "
- # Mount nested_vm image to be able to run VM tests.
- dcr_stc_params+="--volume /var/lib/vm/vhost-nested.img:/var/lib/vm/vhost-nested.img "
# Mount docker.sock to be able to use docker deamon of the host.
dcr_stc_params+="--volume /var/run/docker.sock:/var/run/docker.sock "
# Mount /opt/boot/ where VM kernel and initrd are located.