-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
def __init__(self):
"""Initialize library."""
# VPP Node to apply configuration on
- self._node = u""
+ self._node = ""
# Topology node key
- self._node_key = u""
+ self._node_key = ""
# VPP Configuration
self._nodeconfig = dict()
# Serialized VPP Configuration
- self._vpp_config = u""
+ self._vpp_config = ""
# VPP Service name
- self._vpp_service_name = u"vpp"
+ self._vpp_service_name = "vpp"
# VPP Startup config location
- self._vpp_startup_conf = u"/etc/vpp/startup.conf"
+ self._vpp_startup_conf = "/etc/vpp/startup.conf"
def set_node(self, node, node_key=None):
"""Set DUT node.
:type node_key: str
:raises RuntimeError: If Node type is not DUT.
"""
- if node[u"type"] != NodeType.DUT:
+ if node["type"] != NodeType.DUT:
raise RuntimeError(
- u"Startup config can only be applied to DUTnode."
+ "Startup config can only be applied to DUTnode."
)
self._node = node
self._node_key = node_key
if path[0] not in config:
config[path[0]] = dict()
elif isinstance(config[path[0]], str):
- config[path[0]] = dict() if config[path[0]] == u"" \
- else {config[path[0]]: u""}
+ config[path[0]] = dict() if config[path[0]] == "" \
+ else {config[path[0]]: ""}
self.add_config_item(config[path[0]], value, path[1:])
def dump_config(self, obj, level=-1):
:type level: int
:returns: nothing
"""
- indent = u" "
+ indent = " "
if level >= 0:
self._vpp_config += f"{level * indent}{{\n"
if isinstance(obj, dict):
:param value: Log file.
:type value: str
"""
- path = [u"unix", u"log"]
+ path = ["unix", "log"]
self.add_config_item(self._nodeconfig, value, path)
- def add_unix_cli_listen(self, value=u"/run/vpp/cli.sock"):
+ def add_unix_cli_listen(self, value="/run/vpp/cli.sock"):
"""Add UNIX cli-listen configuration.
:param value: CLI listen address and port or path to CLI socket.
:type value: str
"""
- path = [u"unix", u"cli-listen"]
+ path = ["unix", "cli-listen"]
self.add_config_item(self._nodeconfig, value, path)
def add_unix_cli_no_pager(self):
"""Add UNIX cli-no-pager configuration."""
- path = [u"unix", u"cli-no-pager"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["unix", "cli-no-pager"]
+ self.add_config_item(self._nodeconfig, "", path)
- def add_unix_gid(self, value=u"vpp"):
+ def add_unix_gid(self, value="vpp"):
"""Add UNIX gid configuration.
:param value: Gid.
:type value: str
"""
- path = [u"unix", u"gid"]
+ path = ["unix", "gid"]
self.add_config_item(self._nodeconfig, value, path)
def add_unix_nodaemon(self):
"""Add UNIX nodaemon configuration."""
- path = [u"unix", u"nodaemon"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["unix", "nodaemon"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_unix_coredump(self):
"""Add UNIX full-coredump configuration."""
- path = [u"unix", u"full-coredump"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["unix", "full-coredump"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_unix_exec(self, value):
"""Add UNIX exec configuration."""
- path = [u"unix", u"exec"]
+ path = ["unix", "exec"]
self.add_config_item(self._nodeconfig, value, path)
def add_socksvr(self, socket=Constants.SOCKSVR_PATH):
"""Add socksvr configuration."""
- path = [u"socksvr", u"socket-name"]
+ path = ["socksvr", "socket-name"]
self.add_config_item(self._nodeconfig, socket, path)
def add_graph_node_variant(self, variant=Constants.GRAPH_NODE_VARIANT):
:param value: Graph node variant default value.
:type value: str
"""
- if variant == u"":
+ if variant == "":
return
- variant_list = [u"hsw", u"skx", u"icl"]
+ variant_list = ["hsw", "skx", "icl"]
if variant not in variant_list:
raise ValueError("Invalid graph node variant value")
- path = [u"node", u"default", u"variant"]
+ path = ["node", "default", "variant"]
self.add_config_item(self._nodeconfig, variant, path)
- def add_api_segment_gid(self, value=u"vpp"):
- """Add API-SEGMENT gid configuration.
+ def add_api_segment_gid(self, value="testuser"):
+ """Add api-segment gid configuration.
:param value: Gid.
:type value: str
"""
- path = [u"api-segment", u"gid"]
+ path = ["api-segment", "gid"]
self.add_config_item(self._nodeconfig, value, path)
def add_api_segment_global_size(self, value):
- """Add API-SEGMENT global-size configuration.
+ """Add api-segment global-size configuration.
:param value: Global size.
:type value: str
"""
- path = [u"api-segment", u"global-size"]
+ path = ["api-segment", "global-size"]
+ self.add_config_item(self._nodeconfig, value, path)
+
+ def add_api_segment_prefix(self, value="vpp"):
+ """Add api-segment prefix configuration.
+
+ :param value: Gid.
+ :type value: str
+ """
+ path = ["api-segment", "prefix"]
self.add_config_item(self._nodeconfig, value, path)
def add_api_segment_api_size(self, value):
- """Add API-SEGMENT api-size configuration.
+ """Add api-segment api-size configuration.
:param value: API size.
:type value: str
"""
- path = [u"api-segment", u"api-size"]
+ path = ["api-segment", "api-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_buffers_per_numa(self, value):
:param value: Number of buffers allocated.
:type value: int
"""
- path = [u"buffers", u"buffers-per-numa"]
+ path = ["buffers", "buffers-per-numa"]
self.add_config_item(self._nodeconfig, value, path)
def add_buffers_default_data_size(self, value):
:param value: Buffers data-size allocated.
:type value: int
"""
- path = [u"buffers", u"default data-size"]
+ path = ["buffers", "default data-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_dev(self, *devices):
"""
for device in devices:
if pci_dev_check(device):
- path = [u"dpdk", f"dev {device}"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["dpdk", f"dev {device}"]
+ self.add_config_item(self._nodeconfig, "", path)
- def add_dpdk_cryptodev(self, count):
+ def add_dpdk_cryptodev(self, count, num_rx_queues=1):
"""Add DPDK Crypto PCI device configuration.
:param count: Number of HW crypto devices to add.
+ :param num_rx_queues: Number of RX queues per QAT interface.
:type count: int
+ :type num_rx_queues: int
"""
cryptodevs = Topology.get_cryptodev(self._node)
for device in cryptodevs.values():
for i in range(int(count/len(cryptodevs))):
- addr = re.sub(r"\d.\d$", f"0.{i+1}", device["pci_address"])
- path = ["dpdk", f"dev {addr}"]
- self.add_config_item(self._nodeconfig, "", path)
+ numvfs = device["numvfs"]
+ computed = f"{(i+1)//numvfs}.{(i+1)%numvfs}"
+ addr = re.sub(r"\d.\d$", computed, device["pci_address"])
+ path = ["dpdk", f"dev {addr}", "num-rx-queues"]
+ self.add_config_item(self._nodeconfig, num_rx_queues, path)
self.add_dpdk_uio_driver("vfio-pci")
def add_dpdk_sw_cryptodev(self, sw_pmd_type, socket_id, count):
for _ in range(count):
cryptodev_config = f"vdev cryptodev_{sw_pmd_type}_pmd," \
f"socket_id={str(socket_id)}"
- path = [u"dpdk", cryptodev_config]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["dpdk", cryptodev_config]
+ self.add_config_item(self._nodeconfig, "", path)
+
+ def add_dpdk_dev_default_devargs(self, value):
+ """Add DPDK dev default devargs configuration.
+
+ :param value: DPDK devargs to pass to interface.
+ :type value: str
+ """
+ path = ["dpdk", "dev default", "devargs"]
+ self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_dev_default_rxq(self, value):
"""Add DPDK dev default rxq configuration.
:param value: Default number of rxqs.
:type value: str
"""
- path = [u"dpdk", u"dev default", u"num-rx-queues"]
+ path = ["dpdk", "dev default", "num-rx-queues"]
self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_dev_default_txq(self, value):
:param value: Default number of txqs.
:type value: str
"""
- path = [u"dpdk", u"dev default", u"num-tx-queues"]
+ path = ["dpdk", "dev default", "num-tx-queues"]
self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_dev_default_rxd(self, value):
:param value: Default number of rxds.
:type value: str
"""
- path = [u"dpdk", u"dev default", u"num-rx-desc"]
+ path = ["dpdk", "dev default", "num-rx-desc"]
self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_dev_default_txd(self, value):
:param value: Default number of txds.
:type value: str
"""
- path = [u"dpdk", u"dev default", u"num-tx-desc"]
+ path = ["dpdk", "dev default", "num-tx-desc"]
self.add_config_item(self._nodeconfig, value, path)
+ def add_dpdk_dev_default_tso(self):
+ """Add DPDK dev default tso configuration."""
+ path = ["dpdk", "dev default", "tso"]
+ self.add_config_item(self._nodeconfig, "on", path)
+
def add_dpdk_log_level(self, value):
"""Add DPDK log-level configuration.
:param value: Log level.
:type value: str
"""
- path = [u"dpdk", u"log-level"]
+ path = ["dpdk", "log-level"]
self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_no_pci(self):
"""Add DPDK no-pci."""
- path = [u"dpdk", u"no-pci"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["dpdk", "no-pci"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_dpdk_uio_driver(self, value=None):
"""Add DPDK uio-driver configuration.
"""
if value is None:
value = Topology.get_uio_driver(self._node)
- path = [u"dpdk", u"uio-driver"]
+ path = ["dpdk", "uio-driver"]
self.add_config_item(self._nodeconfig, value, path)
def add_dpdk_max_simd_bitwidth(self, variant=Constants.GRAPH_NODE_VARIANT):
:param value: Graph node variant default value.
:type value: str
"""
- if variant == u"icl":
+ if variant == "icl":
value = 512
- elif variant in [u"skx", u"hsw"]:
+ elif variant in ["skx", "hsw"]:
value = 256
else:
return
- path = [u"dpdk", u"max-simd-bitwidth"]
+ path = ["dpdk", "max-simd-bitwidth"]
self.add_config_item(self._nodeconfig, value, path)
+ def add_dpdk_enable_tcp_udp_checksum(self):
+ """Add DPDK enable-tcp-udp-checksum configuration."""
+ path = ["dpdk", "enable-tcp-udp-checksum"]
+ self.add_config_item(self._nodeconfig, u"", path)
+
def add_cpu_main_core(self, value):
"""Add CPU main core configuration.
:param value: Main core option.
:type value: str
"""
- path = [u"cpu", u"main-core"]
+ path = ["cpu", "main-core"]
self.add_config_item(self._nodeconfig, value, path)
def add_cpu_corelist_workers(self, value):
:param value: Corelist-workers option.
:type value: str
"""
- path = [u"cpu", u"corelist-workers"]
+ path = ["cpu", "corelist-workers"]
self.add_config_item(self._nodeconfig, value, path)
def add_main_heap_size(self, value):
:param value: Amount of heap.
:type value: str
"""
- path = [u"memory", u"main-heap-size"]
+ path = ["memory", "main-heap-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_main_heap_page_size(self, value):
:param value: Heap page size.
:type value: str
"""
- path = [u"memory", u"main-heap-page-size"]
+ path = ["memory", "main-heap-page-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_default_hugepage_size(self, value=Constants.DEFAULT_HUGEPAGE_SIZE):
:param value: Hugepage size.
:type value: str
"""
- path = [u"memory", u"default-hugepage-size"]
+ path = ["memory", "default-hugepage-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_api_trace(self):
"""Add API trace configuration."""
- path = [u"api-trace", u"on"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["api-trace", "on"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_ip6_hash_buckets(self, value):
"""Add IP6 hash buckets configuration.
:param value: Number of IP6 hash buckets.
:type value: str
"""
- path = [u"ip6", u"hash-buckets"]
+ path = ["ip6", "hash-buckets"]
self.add_config_item(self._nodeconfig, value, path)
def add_ip6_heap_size(self, value):
:param value: IP6 Heapsize amount.
:type value: str
"""
- path = [u"ip6", u"heap-size"]
+ path = ["ip6", "heap-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_ipsec_spd_flow_cache_ipv4_inbound(self, value):
:param value: "on" to enable spd flow cache.
:type value: str
"""
- path = [u"ipsec", u"ipv4-inbound-spd-flow-cache"]
+ path = ["ipsec", "ipv4-inbound-spd-flow-cache"]
self.add_config_item(self._nodeconfig, value, path)
def add_ipsec_spd_flow_cache_ipv4_outbound(self, value):
:param value: "on" to enable spd flow cache.
:type value: str
"""
- path = [u"ipsec", u"ipv4-outbound-spd-flow-cache"]
+ path = ["ipsec", "ipv4-outbound-spd-flow-cache"]
self.add_config_item(self._nodeconfig, value, path)
def add_ipsec_spd_fast_path_ipv4_inbound(self, value):
:param value: "on" to enable spd fast path.
:type value: str
"""
- path = [u"ipsec", u"ipv4-inbound-spd-fast-path"]
+ path = ["ipsec", "ipv4-inbound-spd-fast-path"]
self.add_config_item(self._nodeconfig, value, path)
def add_ipsec_spd_fast_path_ipv4_outbound(self, value):
:param value: "on" to enable spd fast path.
:type value: str
"""
- path = [u"ipsec", u"ipv4-outbound-spd-fast-path"]
+ path = ["ipsec", "ipv4-outbound-spd-fast-path"]
self.add_config_item(self._nodeconfig, value, path)
def add_ipsec_spd_fast_path_num_buckets(self, value):
:param value: Number of buckets.
:type value: int
"""
- path = [u"ipsec", u"spd-fast-path-num-buckets"]
+ path = ["ipsec", "spd-fast-path-num-buckets"]
self.add_config_item(self._nodeconfig, value, path)
def add_statseg_size(self, value):
:param value: Stats heapsize amount.
:type value: str
"""
- path = [u"statseg", u"size"]
+ path = ["statseg", "size"]
self.add_config_item(self._nodeconfig, value, path)
def add_statseg_page_size(self, value):
:param value: Stats heapsize amount.
:type value: str
"""
- path = [u"statseg", u"page-size"]
+ path = ["statseg", "page-size"]
self.add_config_item(self._nodeconfig, value, path)
def add_statseg_per_node_counters(self, value):
:param value: "on" to switch the counters on.
:type value: str
"""
- path = [u"statseg", u"per-node-counters"]
+ path = ["statseg", "per-node-counters"]
self.add_config_item(self._nodeconfig, value, path)
def add_plugin(self, state, *plugins):
:type plugins: list
"""
for plugin in plugins:
- path = [u"plugins", f"plugin {plugin}", state]
- self.add_config_item(self._nodeconfig, u" ", path)
+ path = ["plugins", f"plugin {plugin}", state]
+ self.add_config_item(self._nodeconfig, " ", path)
def add_dpdk_no_multi_seg(self):
"""Add DPDK no-multi-seg configuration."""
- path = [u"dpdk", u"no-multi-seg"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["dpdk", "no-multi-seg"]
+ self.add_config_item(self._nodeconfig, "", path)
+
+ def add_dpdk_enable_tcp_udp_checksum(self):
+ """Add DPDK enable-tcp-udp-checksum configuration."""
+ path = ["dpdk", "enable-tcp-udp-checksum"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_dpdk_no_tx_checksum_offload(self):
"""Add DPDK no-tx-checksum-offload configuration."""
- path = [u"dpdk", u"no-tx-checksum-offload"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["dpdk", "no-tx-checksum-offload"]
+ self.add_config_item(self._nodeconfig, "", path)
- def add_nat(self, value=u"deterministic"):
+ def add_nat(self, value="deterministic"):
"""Add NAT mode configuration.
:param value: NAT mode.
:type value: str
"""
- path = [u"nat", value]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["nat", value]
+ self.add_config_item(self._nodeconfig, "", path)
def add_nat_max_translations_per_thread(self, value):
"""Add NAT max. translations per thread number configuration.
:param value: NAT mode.
:type value: str
"""
- path = [u"nat", u"max translations per thread"]
+ path = ["nat", "max translations per thread"]
self.add_config_item(self._nodeconfig, value, path)
def add_nsim_poll_main_thread(self):
"""Add NSIM poll-main-thread configuration."""
- path = [u"nsim", u"poll-main-thread"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["nsim", "poll-main-thread"]
+ self.add_config_item(self._nodeconfig, "", path)
- def add_tcp_congestion_control_algorithm(self, value=u"cubic"):
+ def add_tcp_congestion_control_algorithm(self, value="cubic"):
"""Add TCP congestion control algorithm.
:param value: The congestion control algorithm to use. Example: cubic
:type value: str
"""
- path = [u"tcp", u"cc-algo"]
+ path = ["tcp", "cc-algo"]
self.add_config_item(self._nodeconfig, value, path)
def add_tcp_preallocated_connections(self, value):
:param value: The number of pre-allocated connections.
:type value: int
"""
- path = [u"tcp", u"preallocated-connections"]
+ path = ["tcp", "preallocated-connections"]
self.add_config_item(self._nodeconfig, value, path)
def add_tcp_preallocated_half_open_connections(self, value):
:param value: The number of pre-allocated half open connections.
:type value: int
"""
- path = [u"tcp", u"preallocated-half-open-connections"]
+ path = ["tcp", "preallocated-half-open-connections"]
self.add_config_item(self._nodeconfig, value, path)
+ def add_tcp_tso(self):
+ """Add TCP tso configuration."""
+ path = ["tcp", "tso"]
+ self.add_config_item(self._nodeconfig, "", path)
+
def add_session_enable(self):
"""Add session enable."""
- path = [u"session", u"enable"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["session", "enable"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_session_app_socket_api(self):
"""Use session app socket api."""
- path = [u"session", u"use-app-socket-api"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["session", "use-app-socket-api"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_session_event_queues_memfd_segment(self):
"""Add session event queue memfd segment."""
- path = [u"session", u"evt_qs_memfd_seg"]
- self.add_config_item(self._nodeconfig, u"", path)
+ path = ["session", "evt_qs_memfd_seg"]
+ self.add_config_item(self._nodeconfig, "", path)
def add_session_event_queue_length(self, value):
"""Add session event queue length.
:param value: Session event queue length.
:type value: int
"""
- path = [u"session", u"event-queue-length"]
+ path = ["session", "event-queue-length"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_event_queues_segment_size(self, value):
:param value: Session event queue segment size.
:type value: str
"""
- path = [u"session", u"evt_qs_seg_size"]
+ path = ["session", "evt_qs_seg_size"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_preallocated_sessions(self, value):
:param value: Number of pre-allocated sessions.
:type value: int
"""
- path = [u"session", u"preallocated-sessions"]
+ path = ["session", "preallocated-sessions"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_v4_session_table_buckets(self, value):
:param value: Number of v4 session table buckets.
:type value: int
"""
- path = [u"session", u"v4-session-table-buckets"]
+ path = ["session", "v4-session-table-buckets"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_v4_session_table_memory(self, value):
:param value: Size of v4 session table memory.
:type value: str
"""
- path = [u"session", u"v4-session-table-memory"]
+ path = ["session", "v4-session-table-memory"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_v4_halfopen_table_buckets(self, value):
:param value: Number of v4 halfopen table buckets.
:type value: int
"""
- path = [u"session", u"v4-halfopen-table-buckets"]
+ path = ["session", "v4-halfopen-table-buckets"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_v4_halfopen_table_memory(self, value):
:param value: Size of v4 halfopen table memory.
:type value: str
"""
- path = [u"session", u"v4-halfopen-table-memory"]
+ path = ["session", "v4-halfopen-table-memory"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_local_endpoints_table_buckets(self, value):
:param value: Number of local endpoints table buckets.
:type value: int
"""
- path = [u"session", u"local-endpoints-table-buckets"]
+ path = ["session", "local-endpoints-table-buckets"]
self.add_config_item(self._nodeconfig, value, path)
def add_session_local_endpoints_table_memory(self, value):
:param value: Size of local endpoints table memory.
:type value: str
"""
- path = [u"session", u"local-endpoints-table-memory"]
+ path = ["session", "local-endpoints-table-memory"]
+ self.add_config_item(self._nodeconfig, value, path)
+
+ def add_session_use_dma(self):
+ """Add session use-dma configuration."""
+ path = [u"session", u"use-dma"]
+ self.add_config_item(self._nodeconfig, u"", path)
+
+ def add_dma_dev(self, devices):
+ """Add DMA devices configuration.
+
+ :param devices: DMA devices or work queues.
+ :type devices: list
+ """
+ for device in devices:
+ path = ["dsa", f"dev {device}"]
+ self.add_config_item(self._nodeconfig, "", path)
+
+ def add_logging_default_syslog_log_level(self, value="debug"):
+ """Add default logging level for syslog.
+
+ :param value: Log level.
+ :type value: str
+ """
+ path = ["logging", "default-syslog-log-level"]
self.add_config_item(self._nodeconfig, value, path)
def write_config(self, filename=None):
cmd = f"echo \"{self._vpp_config}\" | sudo tee {filename}"
exec_cmd_no_error(
- self._node, cmd, message=u"Writing config file failed!"
+ self._node, cmd, message="Writing config file failed!"
)
def apply_config(self, filename=None, verify_vpp=True):
"""
huge_size = Constants.DEFAULT_HUGEPAGE_SIZE
for node in nodes.values():
- if node[u"type"] == NodeType.DUT:
+ if node["type"] == NodeType.DUT:
vpp_config = VppConfigGenerator()
vpp_config.set_node(node)
vpp_config.add_unix_log()
vpp_config.add_plugin("enable", "dpdk_plugin.so")
vpp_config.add_dpdk_dev(
*[node["interfaces"][interface].get("pci_address") \
- for interface in node[u"interfaces"]]
+ for interface in node["interfaces"]]
)
vpp_config.add_ip6_hash_buckets(2000000)
vpp_config.add_ip6_heap_size("4G")
vpp_config.apply_config()
+
+ @staticmethod
+ def create_vpp_startup_configuration_container(node, cpuset_cpus=None):
+ """Create base startup configuration of VPP on container.
+
+ :param node: Node in the topology.
+ :param cpuset_cpus: List of CPU cores to allocate.
+ :type node: dict
+ :type cpuset_cpus: list.
+ :returns: Base VPP startup configuration for container.
+ :rtype: VppConfigGenerator
+ """
+ huge_size = Constants.DEFAULT_HUGEPAGE_SIZE
+
+ vpp_config = VppConfigGenerator()
+ vpp_config.set_node(node)
+ vpp_config.add_unix_log()
+ vpp_config.add_unix_cli_listen()
+ vpp_config.add_unix_cli_no_pager()
+ vpp_config.add_unix_exec("/tmp/running.exec")
+ vpp_config.add_socksvr(socket=Constants.SOCKSVR_PATH)
+ if cpuset_cpus:
+ # We will pop the first core from the list to be a main core
+ vpp_config.add_cpu_main_core(str(cpuset_cpus.pop(0)))
+ # If more cores in the list, the rest will be used as workers.
+ corelist_workers = ",".join(str(cpu) for cpu in cpuset_cpus)
+ vpp_config.add_cpu_corelist_workers(corelist_workers)
+ vpp_config.add_buffers_per_numa(215040)
+ vpp_config.add_plugin("disable", "default")
+ vpp_config.add_plugin("enable", "memif_plugin.so")
+ vpp_config.add_plugin("enable", "perfmon_plugin.so")
+ vpp_config.add_main_heap_size("2G")
+ vpp_config.add_main_heap_page_size(huge_size)
+ vpp_config.add_default_hugepage_size(huge_size)
+ vpp_config.add_statseg_size("2G")
+ vpp_config.add_statseg_page_size(huge_size)
+ vpp_config.add_statseg_per_node_counters("on")
+ vpp_config.add_ip6_hash_buckets(2000000)
+ vpp_config.add_ip6_heap_size("4G")
+
+ return vpp_config