# Keywords used in setups and teardowns
-| Set variables in 2-node circular topology
+| Set variables in 2-node circular topology with DUT interface model
| | [Documentation]
-| | ... | Compute path for testing on two given nodes in circular
-| | ... | topology and set corresponding suite variables.
+| | ... | Compute path for testing on two given nodes in circular topology
+| | ... | based on interface model provided as an argument and set
+| | ... | corresponding suite variables.
+| | ...
+| | ... | *Arguments:*
+| | ... | - iface_model - Interface model. Type: string
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
| | ... | - tg - TG node
| | ... | - tg_if1 - 1st TG interface towards DUT.
+| | ... | - tg_if1 - 1st TG interface MAC address.
| | ... | - tg_if2 - 2nd TG interface towards DUT.
+| | ... | - tg_if2 - 2nd TG interface MAC address.
| | ... | - dut1 - DUT1 node
| | ... | - dut1_if1 - 1st DUT interface towards TG.
| | ... | - dut1_if2 - 2nd DUT interface towards TG.
| | ...
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | ... | *Example:*
+| | ...
+| | ... | \| Set variables in 2-node circular topology with DUT interface model\
+| | ... | \| Intel-X520-DA2 \|
+| | ...
+| | [Arguments] | ${iface_model}
+| | ...
+| | ${iface_model_list}= | Create list | ${iface_model}
+| | Append Node | ${nodes['TG']}
+| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
+| | Append Node | ${nodes['TG']}
| | Compute Path | always_same_link=${FALSE}
| | ${tg_if1} | ${tg}= | First Interface
| | ${dut1_if1} | ${dut1}= | First Ingress Interface
| | ${dut1_if2} | ${dut1}= | Last Egress Interface
| | ${tg_if2} | ${tg}= | Last Interface
+| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
| | Set Suite Variable | ${tg}
| | Set Suite Variable | ${tg_if1}
+| | Set Suite Variable | ${tg_if1_mac}
| | Set Suite Variable | ${tg_if2}
+| | Set Suite Variable | ${tg_if2_mac}
| | Set Suite Variable | ${dut1}
| | Set Suite Variable | ${dut1_if1}
| | Set Suite Variable | ${dut1_if2}
-| Set variables in 3-node circular topology
-| | [Documentation]
-| | ... | Compute path for testing on three given nodes in circular
-| | ... | topology and set corresponding suite variables.
-| | ...
-| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - tg - TG node
-| | ... | - tg_if1 - TG interface towards DUT1.
-| | ... | - tg_if2 - TG interface towards DUT2.
-| | ... | - dut1 - DUT1 node
-| | ... | - dut1_if1 - DUT1 interface towards TG.
-| | ... | - dut1_if2 - DUT1 interface towards DUT2.
-| | ... | - dut2 - DUT2 node
-| | ... | - dut2_if1 - DUT2 interface towards DUT1.
-| | ... | - dut2_if2 - DUT2 interface towards TG.
-| | ...
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | ... | ${nodes['TG']}
-| | Compute Path
-| | ${tg_if1} | ${tg}= | Next Interface
-| | ${dut1_if1} | ${dut1}= | Next Interface
-| | ${dut1_if2} | ${dut1}= | Next Interface
-| | ${dut2_if1} | ${dut2}= | Next Interface
-| | ${dut2_if2} | ${dut2}= | Next Interface
-| | ${tg_if2} | ${tg}= | Next Interface
-| | Set Suite Variable | ${tg}
-| | Set Suite Variable | ${tg_if1}
-| | Set Suite Variable | ${tg_if2}
-| | Set Suite Variable | ${dut1}
-| | Set Suite Variable | ${dut1_if1}
-| | Set Suite Variable | ${dut1_if2}
-| | Set Suite Variable | ${dut2}
-| | Set Suite Variable | ${dut2_if1}
-| | Set Suite Variable | ${dut2_if2}
-
-| Set variables in 2-node circular topology with DUT interface model
+| Set variables in 3-node circular topology with DUT interface model
| | [Documentation]
-| | ... | Compute path for testing on two given nodes in circular topology
+| | ... | Compute path for testing on three given nodes in circular topology
| | ... | based on interface model provided as an argument and set
| | ... | corresponding suite variables.
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
| | ... | - tg - TG node
| | ... | - tg_if1 - 1st TG interface towards DUT.
+| | ... | - tg_if1 - 1st TG interface MAC address.
| | ... | - tg_if2 - 2nd TG interface towards DUT.
+| | ... | - tg_if2 - 2nd TG interface MAC address.
| | ... | - dut1 - DUT1 node
-| | ... | - dut1_if1 - 1st DUT interface towards TG.
-| | ... | - dut1_if2 - 2nd DUT interface towards TG.
+| | ... | - dut1_if1 - DUT1 interface towards TG.
+| | ... | - dut1_if2 - DUT1 interface towards DUT2.
+| | ... | - dut2 - DUT2 node
+| | ... | - dut2_if1 - DUT2 interface towards DUT1.
+| | ... | - dut2_if2 - DUT2 interface towards TG.
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Set variables in 2-node circular topology with DUT interface model\
+| | ... | \| Set variables in 3-node circular topology with DUT interface model\
| | ... | \| Intel-X520-DA2 \|
| | ...
| | [Arguments] | ${iface_model}
| | ${iface_model_list}= | Create list | ${iface_model}
| | Append Node | ${nodes['TG']}
| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
+| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
| | Append Node | ${nodes['TG']}
-| | Compute Path | always_same_link=${FALSE}
-| | ${tg_if1} | ${tg}= | First Interface
-| | ${dut1_if1} | ${dut1}= | First Ingress Interface
-| | ${dut1_if2} | ${dut1}= | Last Egress Interface
-| | ${tg_if2} | ${tg}= | Last Interface
+| | Compute Path
+| | ${tg_if1} | ${tg}= | Next Interface
+| | ${dut1_if1} | ${dut1}= | Next Interface
+| | ${dut1_if2} | ${dut1}= | Next Interface
+| | ${dut2_if1} | ${dut2}= | Next Interface
+| | ${dut2_if2} | ${dut2}= | Next Interface
+| | ${tg_if2} | ${tg}= | Next Interface
+| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
| | Set Suite Variable | ${tg}
| | Set Suite Variable | ${tg_if1}
+| | Set Suite Variable | ${tg_if1_mac}
| | Set Suite Variable | ${tg_if2}
+| | Set Suite Variable | ${tg_if2_mac}
| | Set Suite Variable | ${dut1}
| | Set Suite Variable | ${dut1_if1}
| | Set Suite Variable | ${dut1_if2}
+| | Set Suite Variable | ${dut2}
+| | Set Suite Variable | ${dut2_if1}
+| | Set Suite Variable | ${dut2_if2}
-| Set variables in 3-node circular topology with DUT interface model
+| Set variables in 3-node circular topology with DUT interface model with double link between DUTs
| | [Documentation]
| | ... | Compute path for testing on three given nodes in circular topology
-| | ... | based on interface model provided as an argument and set
-| | ... | corresponding suite variables.
+| | ... | with double link between DUTs based on interface model provided as an
+| | ... | argument and set corresponding suite variables.
| | ...
| | ... | *Arguments:*
| | ... | - iface_model - Interface model. Type: string
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
| | ... | - tg - TG node
-| | ... | - tg_if1 - TG interface towards DUT1.
-| | ... | - tg_if2 - TG interface towards DUT2.
+| | ... | - tg_if1 - 1st TG interface towards DUT.
+| | ... | - tg_if1 - 1st TG interface MAC address.
+| | ... | - tg_if2 - 2nd TG interface towards DUT.
+| | ... | - tg_if2 - 2nd TG interface MAC address.
| | ... | - dut1 - DUT1 node
| | ... | - dut1_if1 - DUT1 interface towards TG.
-| | ... | - dut1_if2 - DUT1 interface towards DUT2.
+| | ... | - dut1_if2_1 - DUT1 interface 1 towards DUT2.
+| | ... | - dut1_if2_2 - DUT1 interface 2 towards DUT2.
| | ... | - dut2 - DUT2 node
-| | ... | - dut2_if1 - DUT2 interface towards TG.
-| | ... | - dut2_if2 - DUT2 interface towards DUT1.
+| | ... | - dut2_if1_1 - DUT2 interface 1 towards DUT1.
+| | ... | - dut2_if1_2 - DUT2 interface 2 towards DUT1.
+| | ... | - dut2_if2 - DUT2 interface towards TG.
| | ...
| | ... | *Example:*
| | ...
| | ... | \| Set variables in 3-node circular topology with DUT interface model\
-| | ... | \| Intel-X520-DA2 \|
+| | ... | with double link between DUTs \| Intel-X520-DA2 \|
| | ...
| | [Arguments] | ${iface_model}
| | ...
| | ${iface_model_list}= | Create list | ${iface_model}
+| | # Compute path TG - DUT1 with single link in between
| | Append Node | ${nodes['TG']}
| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
-| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
| | Append Node | ${nodes['TG']}
| | Compute Path
| | ${tg_if1} | ${tg}= | Next Interface
| | ${dut1_if1} | ${dut1}= | Next Interface
-| | ${dut1_if2} | ${dut1}= | Next Interface
-| | ${dut2_if1} | ${dut2}= | Next Interface
-| | ${dut2_if2} | ${dut2}= | Next Interface
+| | # Compute path TG - DUT2 with single link in between
+| | Clear Path
+| | Append Node | ${nodes['TG']}
+| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
+| | Append Node | ${nodes['TG']}
+| | Compute Path
| | ${tg_if2} | ${tg}= | Next Interface
+| | ${dut2_if2} | ${dut2}= | Next Interface
+| | # Compute path DUT1 - DUT2 with double link in between
+| | Clear Path
+| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
+| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
+| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
+| | Compute Path | always_same_link=${FALSE}
+| | ${dut1_if2_1} | ${dut1}= | First Interface
+| | ${dut1_if2_2} | ${dut1}= | Last Interface
+| | ${dut2_if1_1} | ${dut2}= | First Ingress Interface
+| | ${dut2_if1_2} | ${dut2}= | Last Egress Interface
+| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | # Set suite variables
| | Set Suite Variable | ${tg}
| | Set Suite Variable | ${tg_if1}
+| | Set Suite Variable | ${tg_if1_mac}
| | Set Suite Variable | ${tg_if2}
+| | Set Suite Variable | ${tg_if2_mac}
| | Set Suite Variable | ${dut1}
| | Set Suite Variable | ${dut1_if1}
-| | Set Suite Variable | ${dut1_if2}
+| | Set Suite Variable | ${dut1_if2_1}
+| | Set Suite Variable | ${dut1_if2_2}
| | Set Suite Variable | ${dut2}
-| | Set Suite Variable | ${dut2_if1}
+| | Set Suite Variable | ${dut2_if1_1}
+| | Set Suite Variable | ${dut2_if1_2}
| | Set Suite Variable | ${dut2_if2}
| Tear down guest VM with dpdk-testpmd
| Set up 2-node performance topology with DUT's NIC model
| | [Documentation]
-| | ... | Suite preparation phase that setup default startup configuration of
-| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
+| | ... | Suite preparation phase that sets the default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
| | ... | variables used in test cases based on interface model provided as an
| | ... | argument. Initializes traffic generator.
| | ...
| Set up 2-node-switched performance topology with DUT's NIC model
| | [Documentation]
-| | ... | Suite preparation phase that setup default startup configuration of
-| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
+| | ... | Suite preparation phase that sets the default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
| | ... | variables used in test cases based on interface model provided as an
| | ... | argument. Initializes traffic generator.
| | ...
| Set up 3-node performance topology with DUT's NIC model
| | [Documentation]
-| | ... | Suite preparation phase that setup default startup configuration of
-| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
+| | ... | Suite preparation phase that sets the default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
| | ... | variables used in test cases based on interface model provided as an
| | ... | argument. Initializes traffic generator.
| | ...
| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
+| Set up 3-node performance topology with DUT's NIC model with double link between DUTs
+| | [Documentation]
+| | ... | Suite preparation phase that sets the default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
+| | ... | variables used in test cases based on interface model provided as an
+| | ... | argument. Initializes traffic generator.
+| | ...
+| | ... | *Arguments:*
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - nic_model - Interface model. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Set up 3-node performance topology with DUT's NIC model with \
+| | ... | double link between DUTs \| L2 \| Intel-X520-DA2 \|
+| | ...
+| | [Arguments] | ${topology_type} | ${nic_model}
+| | ...
+| | Set variables in 3-node circular topology with DUT interface model with double link between DUTs
+| | ... | ${nic_model}
+| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
+
| Set up DPDK 2-node performance topology with DUT's NIC model
| | [Documentation]
-| | ... | Updates interfaces on all nodes and setup global
+| | ... | Updates interfaces on all nodes and sets the global
| | ... | variables used in test cases based on interface model provided as an
| | ... | argument. Initializes traffic generator. Initializes DPDK test
| | ... | environment.
| Set up DPDK 3-node performance topology with DUT's NIC model
| | [Documentation]
-| | ... | Updates interfaces on all nodes and setup global
+| | ... | Updates interfaces on all nodes and sets the global
| | ... | variables used in test cases based on interface model provided as an
| | ... | argument. Initializes traffic generator. Initializes DPDK test
| | ... | environment.
| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
+| Set up SRIOV 2-node performance topology with DUT's NIC model
+| | [Documentation]
+| | ... | Suite preparation phase that sets default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global
+| | ... | variables used in test cases based on interface model provided as an
+| | ... | argument. Initializes traffic generator.
+| | ... | It configures PCI device with VFs on all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - nic_model - Interface model. Type: string
+| | ... | - vf_driver - Virtual function driver. Type: string
+| | ... | - numvfs - Number of VFs. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Set up SRIOV 2-node performance topology with DUT's NIC model \
+| | ... | \| L2 \| Intel-X520-DA2 \| AVF \|
+| | ...
+| | [Arguments] | ${topology_type} | ${nic_model} | ${vf_driver}
+| | ... | ${numvfs}=${1}
+| | ...
+| | Set variables in 2-node circular topology with DUT interface model
+| | ... | ${nic_model}
+| | Run Keyword If | '${vf_driver}' == 'AVF'
+| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs}
+| | ... | topology_type=${topology_type}
+| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut1} | ${dut1_if2_vf0}
+| | ... | ${topology_type}
+
+| Set up SRIOV 3-node performance topology with DUT's NIC model
+| | [Documentation]
+| | ... | Suite preparation phase that sets default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global
+| | ... | variables used in test cases based on interface model provided as an
+| | ... | argument. Initializes traffic generator.
+| | ... | It configures PCI device with VFs on all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - nic_model - Interface model. Type: string
+| | ... | - vf_driver - Virtual function driver. Type: string
+| | ... | - numvfs - Number of VFs. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Set up SRIOV 3-node performance topology with DUT's NIC model \
+| | ... | \| L2 \| Intel-X520-DA2 \| AVF \|
+| | ...
+| | [Arguments] | ${topology_type} | ${nic_model} | ${vf_driver}
+| | ... | ${numvfs}=${1}
+| | ...
+| | Set variables in 3-node circular topology with DUT interface model
+| | ... | ${nic_model}
+| | Run Keyword If | '${vf_driver}' == 'AVF'
+| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs}
+| | ... | topology_type=${topology_type}
+| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut2} | ${dut2_if2_vf0}
+| | ... | ${topology_type}
+
| Set up IPSec performance test suite
| | [Documentation]
| | ... | Suite preparation phase that sets default startup configuration of
| | ... | ${topology_type} | ${nic_model}
| | ${numvfs}= | Set Variable If
| | ... | '${crypto_type}' == 'HW_cryptodev' | ${32}
-| | ... | '${crypto_type}' == 'SW_cryptodev' | ${0}
-| | Configure crypto device on all DUTs | force_init=${True} | numvfs=${numvfs}
| | Run Keyword If | '${crypto_type}' == 'HW_cryptodev'
-| | ... | Configure kernel module on all DUTs | igb_uio | force_load=${True}
-
-| Set up performance topology with containers
-| | [Documentation]
-| | ... | Suite preparation phase that starts containers
-| | ...
-| | Set Suite Variable | @{container_groups} | @{EMPTY}
-| | Construct VNF containers on all DUTs
-| | Acquire all 'VNF' containers
-| | Create all 'VNF' containers
-| | Configure VPP in all 'VNF' containers
-| | Install VPP in all 'VNF' containers
+| | ... | Configure crypto device on all DUTs | force_init=${True}
+| | ... | numvfs=${numvfs}
+| | Run Keyword If | '${crypto_type}' == 'HW_cryptodev'
+| | ... | Configure kernel module on all DUTs | vfio_pci | force_load=${True}
| Set up performance test suite with MEMIF
| | [Documentation]
| | Set Suite Variable | @{plugins_to_enable}
| | Append To List | ${plugins_to_enable} | acl_plugin.so
+| Set up performance test suite with AVF driver
+| | [Documentation]
+| | ... | Append avf_plugin.so to the list of enabled plugins.
+| | ...
+| | Set Suite Variable | @{plugins_to_enable}
+| | Append To List | ${plugins_to_enable} | avf_plugin.so
+
| Set up performance test suite with Static SRv6 proxy
| | [Documentation]
| | ... | Append srv6as_plugin.so to the list of enabled plugins.
| | Set Suite Variable | @{plugins_to_enable}
| | Append To List | ${plugins_to_enable} | srv6am_plugin.so
+| Set up performance test suite with LACP mode link bonding
+| | [Documentation]
+| | ... | Append lacp_plugin.so to the list of enabled plugins.
+| | ...
+| | Set Suite Variable | @{plugins_to_enable}
+| | Append To List | ${plugins_to_enable} | lacp_plugin.so
+
| Set up 3-node performance topology with wrk and DUT's NIC model
| | [Documentation]
-| | ... | Suite preparation phase that setup default startup configuration of
-| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
+| | ... | Suite preparation phase that sets the default startup configuration of
+| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
| | ... | variables used in test cases based on interface model provided as an
| | ... | argument. Installs the traffic generator.
| | ...
# Suite teardowns
-| Tear down 3-node performance topology
-| | [Documentation]
-| | ... | Suite teardown phase with traffic generator teardown.
-| | ...
-| | Teardown traffic generator | ${tg}
-
-| Tear down 3-node performance topology with container
-| | [Documentation]
-| | ... | Suite teardown phase with traffic generator teardown and container
-| | ... | destroy.
-| | ...
-| | Teardown traffic generator | ${tg}
-| | :FOR | ${group} | IN | @{container_groups}
-| | | Destroy all '${group}' containers
-
| Tear down 2-node performance topology
| | [Documentation]
| | ... | Suite teardown phase with traffic generator teardown.
| | ...
| | Teardown traffic generator | ${tg}
-| Tear down 2-node performance topology with container
+| Tear down 3-node performance topology
| | [Documentation]
-| | ... | Suite teardown phase with traffic generator teardown and container
-| | ... | destroy.
+| | ... | Suite teardown phase with traffic generator teardown.
| | ...
| | Teardown traffic generator | ${tg}
-| | :FOR | ${group} | IN | @{container_groups}
-| | | Destroy all '${group}' containers
# Tests setups
| | Apply Kubernetes resource on all duts | ${nodes}
| | ... | pods/contiv-vswitch.yaml
+| Set up performance test with containers
+| | [Documentation]
+| | ... | Common test setup for performance tests with containers
+| | ...
+| | ... | *Arguments:*
+| | ... | - chains: Total number of chains. Type: integer
+| | ... | - nodeness: Total number of nodes per chain. Type: integer
+| | ... | - auto_scale - If True, use same amount of Dataplane threads for
+| | ... | network function as DUT, otherwise use single physical core for
+| | ... | every network function. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Set up performance test with containers \| 1 \| 1 \|
+| | ...
+| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
+| | ...
+| | Set Test Variable | @{container_groups} | @{EMPTY}
+| | Set Test Variable | ${container_group} | CNF
+| | Set Test Variable | ${nf_nodes}
+| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager
+| | ... | engine=${container_engine} | WITH NAME | ${container_group}
+| | Construct chains of containers on all DUTs | ${nf_chains} | ${nf_nodes}
+| | ... | auto_scale=${auto_scale}
+| | Acquire all '${container_group}' containers
+| | Create all '${container_group}' containers
+| | Configure VPP in all '${container_group}' containers
+| | Stop VPP service on all DUTs | ${nodes}
+| | Start VPP in all '${container_group}' containers
+| | Start VPP service on all DUTs | ${nodes}
+| | Append To List | ${container_groups} | ${container_group}
+
# Tests teardowns
| Tear down performance discovery test
| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
-| Tear down performance ndrchk test
-| | [Documentation] | Common test teardown for ndrchk performance tests.
-| | ...
-| | Remove All Added Ports On All DUTs From Topology | ${nodes}
-| | Show VAT History On All DUTs | ${nodes}
-
-| Tear down performance pdrchk test
-| | [Documentation] | Common test teardown for pdrchk performance tests.
-| | ...
-| | Remove All Added Ports On All DUTs From Topology | ${nodes}
-| | Show VAT History On All DUTs | ${nodes}
-
| Tear down performance mrr test
| | [Documentation] | Common test teardown for max-received-rate performance
| | ... | tests.
| | Show VAT History On All DUTs | ${nodes}
| | Show statistics on all DUTs | ${nodes}
+| Tear down performance test with container
+| | [Documentation]
+| | ... | Common test teardown for performance tests which uses containers.
+| | ...
+| | :FOR | ${container_group} | IN | @{container_groups}
+| | | Destroy all '${container_group}' containers
+
| Tear down performance test with vhost and VM with dpdk-testpmd
| | [Documentation] | Common test teardown for performance tests which use
| | ... | vhost(s) and VM(s) with dpdk-testpmd.
| | Run keyword unless | ${dut2_node}==${None}
| | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
+| Tear down mrr test with vhost and VM with dpdk-testpmd
+| | [Documentation] | Common test teardown for mrr tests which use
+| | ... | vhost(s) and VM(s) with dpdk-testpmd.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut1_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut1_vm_refs - VM references on node. Type: dictionary
+| | ... | - dut2_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut2_vm_refs - VM references on node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \
+| | ... | \| ${node['DUT1']} \| ${dut_vm_refs} \
+| | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \|
+| | ...
+| | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
+| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
+| | ...
+| | Remove All Added Ports On All DUTs From Topology | ${nodes}
+| | Show VAT History On All DUTs | ${nodes}
+| | Show VPP vhost on all DUTs | ${nodes}
+| | Show statistics on all DUTs | ${nodes}
+| | Run keyword unless | ${dut1_node}==${None}
+| | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
+| | Run keyword unless | ${dut2_node}==${None}
+| | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
+
+| Tear down performance test with vhost and VM with dpdk-testpmd and ACL
+| | [Documentation] | Common test teardown for performance tests which use
+| | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd.
+| | ...
+| | ... | *Arguments:*
+| | ... | - rate - Rate for sending packets. Type: string
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - dut1_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut1_vm_refs - VM references on node. Type: dictionary
+| | ... | - dut2_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut2_vm_refs - VM references on node. Type: dictionary
+| | ...
+| | [Arguments] | ${rate} | ${framesize} | ${topology_type}
+| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
+| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
+| | ...
+| | Tear down performance test with vhost and VM with dpdk-testpmd
+| | ... | ${rate} | ${framesize} | ${topology_type}
+| | ... | ${dut1_node} | ${dut1_vm_refs}
+| | ... | ${dut2_node} | ${dut2_vm_refs}
+| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1}
+| | Run Keyword If Test Failed | Run Keyword And Ignore Error
+| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
+
+| Tear down mrr test with vhost and VM with dpdk-testpmd and ACL
+| | [Documentation] | Common test teardown for mrr tests which use
+| | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut1_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut1_vm_refs - VM references on node. Type: dictionary
+| | ... | - dut2_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut2_vm_refs - VM references on node. Type: dictionary
+| | ...
+| | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
+| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
+| | ...
+| | Tear down mrr test with vhost and VM with dpdk-testpmd
+| | ... | ${dut1_node} | ${dut1_vm_refs}
+| | ... | ${dut2_node} | ${dut2_vm_refs}
+| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1}
+| | Run Keyword If Test Failed | Run Keyword And Ignore Error
+| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
+
| Tear down performance pdrchk test with vhost and VM with dpdk-testpmd
| | [Documentation] | Common test teardown for performance pdrchk tests which \
| | ... | use vhost(s) and VM(s) with dpdk-testpmd.
| | Run keyword unless | ${dut2_node}==${None}
| | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
-| Tear down DPDK 3-node performance topology
+| Tear down DPDK 2-node performance topology
| | [Documentation]
| | ... | Suite teardown phase with traffic generator teardown.
| | ... | Cleanup DPDK test environment.
| | ...
| | Teardown traffic generator | ${tg}
| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
-| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
-| Tear down DPDK 2-node performance topology
+| Tear down DPDK 3-node performance topology
| | [Documentation]
| | ... | Suite teardown phase with traffic generator teardown.
| | ... | Cleanup DPDK test environment.
| | ...
| | Teardown traffic generator | ${tg}
| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
+| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
| Tear down performance discovery test with NAT
| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
| | Show NAT verbose | ${dut1}
| | Show NAT verbose | ${dut2}
+| Tear down mrr test with NAT
+| | [Documentation] | Common test teardown for mrr performance \
+| | ... | tests with NAT feature used.
+| | ...
+| | ... | \| Tear down mrr test with NAT \|
+| | ...
+| | Tear down performance mrr test
+| | Show NAT verbose | ${dut1}
+| | Show NAT verbose | ${dut2}
+
| Tear down performance test with ACL
| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
| | ... | tests with ACL feature used.
| | ...
| | Tear down performance discovery test | ${rate} | ${framesize}
| | ... | ${traffic_profile}
-| | Vpp Log Plugin Acl Settings | ${dut1}
+| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1}
+| | Run Keyword If Test Failed | Run Keyword And Ignore Error
+| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
+
+| Tear down mrr test with ACL
+| | [Documentation] | Common test teardown for mrr performance \
+| | ... | tests with ACL feature used.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Tear down mrr test with ACL \|
+| | ...
+| | Tear down performance mrr test
+| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1}
| | Run Keyword If Test Failed | Run Keyword And Ignore Error
| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
| | Run Keyword And Ignore Error
| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1}
+| Tear down mrr test with MACIP ACL
+| | [Documentation] | Common test teardown for mrr performance \
+| | ... | tests with MACIP ACL feature used.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Tear down mrr test with MACIP ACL \|
+| | ...
+| | Tear down performance mrr test
+| | Run Keyword If Test Failed | Run Keyword And Ignore Error
+| | ... | Vpp Log Macip Acl Settings | ${dut1}
+| | Run Keyword And Ignore Error
+| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1}
+
| Tear down performance test with Ligato Kubernetes
| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
| | ... | tests with Ligato Kubernetes.
| | ...
| | ... | *Arguments:*
| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - framesize - L2 Frame Size [B]. Type: integer/string
| | ... | - traffic_profile - Traffic profile. Type: string
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Tear down performance test with MACIP ACL \| 100000pps \| 64 \
-| | ... | \| ${traffic_profile} \|
+| | ... | \| Tear down performance test with SRv6 with encapsulation \
+| | ... | \| 100000pps \| 64 \| ${traffic_profile} \|
| | ...
| | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
| | ...
| | Run Keyword If Test Failed
| | ... | Show SR Steering Policies on all DUTs | ${nodes}
| | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes}
+
+| Tear down mrr test with SRv6 with encapsulation
+| | [Documentation] | Common test teardown for mrr tests with SRv6 with \
+| | ... | encapsulation feature used.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Tear down mrr test with SRv6 with encapsulation \|
+| | ...
+| | Remove All Added Ports On All DUTs From Topology | ${nodes}
+| | Show VAT History On All DUTs | ${nodes}
+| | Run Keyword If Test Failed | Show SR Policies on all DUTs | ${nodes}
+| | Run Keyword If Test Failed
+| | ... | Show SR Steering Policies on all DUTs | ${nodes}
+| | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes}