-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2023 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Library | Collections
+| Library | resources.libraries.python.model.ExportResult
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.InterfaceUtil
| | ... | Display results as formatted test message.
| | ... | Fail if computed lower bound is 110% of the minimal rate or less.
| | ... | Input rates are unidirectional, in transaction per second.
-| | ... | Reported result may contain aggregate pps rates, depending on test.
+| | ... | Reported result may contain aggregated pps rates, depending on test.
| | ... | Call \${resetter} (if defined) to reset DUT state before each trial.
| |
| | ... | *Test (or broader scope) variables read:*
| | ${transaction_scale} = | Get Transaction Scale
| | ${transaction_type} = | Get Transaction Type
| | ${use_latency} = | Get Use Latency
+| | # TRex needs a warmup to avoid unsent packets at half-max rate.
+| | Send traffic on tg
+| | ... | duration=1.0
+| | ... | rate=${max_rate}
+| | ... | frame_size=${frame_size}
+| | ... | traffic_profile=${traffic_profile}
+| | ... | async_call=${False}
+| | ... | duration_limit=${1.0}
+| | ... | ppta=${ppta}
+| | ... | traffic_directions=${traffic_directions}
+| | ... | transaction_duration=${transaction_duration}
+| | ... | transaction_scale=${transaction_scale}
+| | ... | transaction_type=${transaction_type}
+| | ... | use_latency=False
+| | ... | ramp_up_duration=${0.0}
+| | ... | ramp_up_rate=${0.0}
+| | # Ready for main search.
| | ${average} | ${stdev} = | Perform soak search
| | ... | frame_size=${frame_size}
| | ... | traffic_profile=${traffic_profile}
| | ${lower} | ${upper} = | Display result of soak search
| | ... | ${average} | ${stdev}
| | Set Test Variable | \${rate for teardown} | ${lower}
+| | # Stats at the discovered critical rate.
+| | Set Test Variable | ${telemetry_rate} | plr
+| | Set Test Variable | ${telemetry_export} | ${True}
+| | Send traffic at specified rate
+| | ... | rate=${lower}
+| | ... | trial_duration=${1.0}
+| | ... | trial_multiplicity=${1}
+| | ... | use_latency=${use_latency}
+| | ... | duration_limit=${1.0}
| | Should Not Be True | 1.1 * ${min_rate_soft} > ${lower}
| | ... | Lower bound ${lower} too small for unidir minimum ${min_rate_soft}.
| | ... | Display findings as a formatted test message.
| | ... | Fail if a resulting lower bound has too high loss ratio.
| | ... | Input rates are unidirectional, in transaction per second.
-| | ... | Reported result may contain aggregate pps rates, depending on test.
+| | ... | Reported result may contain aggregated pps rates, depending on test.
| | ... | Additional latency measurements are performed for smaller loads,
| | ... | even if latency stream is disabled in search. Their results
| | ... | are also displayed.
| | ... | final_trial_duration=${30.0}
| | ... | initial_trial_duration=${1.0}
| | ... | number_of_intermediate_phases=${2}
-| | ... | timeout=${720.0}
+| | ... | timeout=${1200.0}
| | ... | ppta=${ppta}
| | ... | resetter=${resetter}
| | ... | traffic_directions=${traffic_directions}
| | ${pdr} = | Set Variable | ${result[1].measured_low.target_tr}
| | ${ndr} = | Set Variable | ${result[0].measured_low.target_tr}
| | # We expect NDR and PDR to have different-looking stats.
+| | Set Test Variable | ${telemetry_rate} | pdr
+| | Set Test Variable | ${telemetry_export} | ${True}
| | Send traffic at specified rate
| | ... | rate=${pdr}
| | ... | trial_duration=${1.0}
| | ... | trial_multiplicity=${1}
| | ... | use_latency=${use_latency}
| | ... | duration_limit=${1.0}
+| | Set Test Variable | ${telemetry_rate} | ndr
+| | Set Test Variable | ${telemetry_export} | ${True}
| | Run Keyword If | ${ndr} != ${pdr}
| | ... | Send traffic at specified rate
| | ... | rate=${ndr}
| | ... | final_trial_duration=${10.0}
| | ... | initial_trial_duration=${1.0}
| | ... | number_of_intermediate_phases=${1}
-| | ... | timeout=${720}
+| | ... | timeout=${1200}
| | ... | ppta=${ppta}
| | ... | resetter=${resetter}
| | ... | traffic_directions=${traffic_directions}
| | ... | ramp_up_rate=${ramp_up_rate}
| | ${latency} = | Get Latency Int
| | Set Test Message | ${\n}${message_prefix} ${latency} | append=${True}
+| | Export Ndrpdr Latency | ${message_prefix} | ${latency}
| Send ramp-up traffic
| | [Documentation]
| | ... | \| Send ramp-up traffic \|
| |
| | ${ramp_up_rate} = | Get Ramp Up Rate
-| | Run Keyword Unless | ${ramp_up_rate} > 0.0 | Fail | Ramp up rate missing!
+| | Run Keyword If | ${ramp_up_rate} <= 0.0 | Fail | Ramp up rate missing!
| | ${ramp_up_duration} = | Get Ramp Up Duration
| | ${ppta} = | Get Packets Per Transaction Aggregated
| | ${traffic_directions} = | Get Traffic Directions
| | ... | Type: boolean
| | ... | - duration_limit - Hard limit for trial duration, overriding duration
| | ... | computed from transaction_scale. Default 0.0 means no limit.
+| | ... | - export_mrr_unit - Use this unit when exporting MRR values,
+| | ... | or empty string for no export.
| |
| | ... | *Example:*
| |
| | ... | \| Send traffic at specified rate \| \${1.0} \| ${4000000.0} \
-| | ... | \| \${10} \| ${False} \| ${1.0} \|
+| | ... | \| \${10} \| ${False} \| ${1.0} \| pps \|
| |
| | [Arguments] | ${trial_duration} | ${rate} | ${trial_multiplicity}
| | ... | ${use_latency}=${False} | ${duration_limit}=${0.0}
+| | ... | ${export_mrr_unit}=${Empty}
| |
| | ${ppta} = | Get Packets Per Transaction Aggregated
| | ${ramp_up_duration} = | Get Ramp Up Duration
| | ${transaction_scale} = | Get Transaction Scale
| | ${transaction_type} = | Get Transaction Type
| | Set Test Variable | \${rate_for_teardown} | ${rate}
+| | Set Test Variable | \${runtime_rate} | ${rate}
| | FOR | ${action} | IN | @{stat_runtime}
| | | Run Keyword | Additional Statistics Action For ${action}
| | END
| | | ... | ramp_up_rate=${ramp_up_rate}
| | | # Out of several quantities for aborted traffic (duration stretching),
| | | # the approximated receive rate is the best estimate we have.
-| | | Append To List | ${results} | ${result.approximated_receive_rate}
+| | | ${value} = | Set Variable | ${result.approximated_receive_rate}
+| | | # TODO: Add correct bandwidth computation.
+| | | Append Mrr Value | ${value} | ${export_mrr_unit}
+| | | Append To List | ${results} | ${value}
| | END
| | FOR | ${action} | IN | @{stat_post_trial}
| | | Run Keyword | Additional Statistics Action For ${action}
| | ... | ${trial_multiplicity}=${trial_multiplicity}
| | ... | ${traffic_directions}=${1}
| |
+| | Set Test Variable | ${telemetry_rate} | mrr
+| | Set Test Variable | ${telemetry_export} | ${True}
| | ${results}= | Send iPerf3 traffic at specified rate
| | ... | ${trial_duration} | ${None} | ${None}
| | ... | ${trial_multiplicity} | ${traffic_directions}
+| | ... | export_mrr_unit=bps
| | Set Test Message | ${\n}iPerf3 trial results
| | Set Test Message | in Gbits per second: ${results}
| | ... | append=yes
| | ... | *Arguments:*
| | ... | - trial_duration - Duration of single trial [s].
| | ... | Type: float
-| | ... | - rate - Target aggregate transmit rate [bps] / Bits per second
+| | ... | - rate - Target aggregated transmit rate [bps] / Bits per second.
| | ... | Type: float
| | ... | - frame_size - L2 Frame Size [B].
| | ... | Type: integer or string
| | ... | Type: integer
| | ... | - extended_debug - True to enable extended debug.
| | ... | Type: boolean
+| | ... | - export_mrr_unit - Use this unit when exporting MRR values,
+| | ... | or empty string for no export.
+| | ... | Type: string
| |
| | ... | *Example:*
| |
| | [Arguments] | ${trial_duration} | ${rate} | ${frame_size}
| | ... | ${trial_multiplicity}=${trial_multiplicity}
| | ... | ${traffic_directions}=${1} | ${extended_debug}=${extended_debug}
+| | ... | ${export_mrr_unit}=${Empty}
| |
| | Set Test Variable | ${extended_debug}
| | Set Test Variable | ${rate}
| | ${smt_used}= | Is SMT enabled | ${nodes['${iperf_server_node}']['cpuinfo']}
| | ${vm_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Get Library Instance | vnf_manager
-| | ${vth}= | Evaluate | (${thr_count_int} + 1)
+| | ${vth}= | Evaluate | (${dp_count_int} + 1)
| | ${cpu_skip_cnt}= | Set Variable If | '${vm_status}' == 'PASS'
| | ... | ${CPU_CNT_SYSTEM}
| | ... | ${${CPU_CNT_SYSTEM} + ${CPU_CNT_MAIN} + ${cpu_count_int} + ${vth}}
| | ... | bind_mask=${iperf_server_bind_mask}
| | ... | namespace=${iperf_server_namespace}
| | ... | cpu_skip_cnt=${cpu_skip_cnt}
-| | Run Keyword If | '${iperf_client_namespace}' is not '${None}'
+| | Run Keyword If | '${iperf_client_namespace}' != '${None}'
| | ... | Set Linux Interface IP
| | ... | ${nodes['${iperf_client_node}']}
| | ... | interface=${iperf_client_interface}
| | ... | ip_addr=${iperf_client_bind}
| | ... | prefix=${iperf_client_bind_mask}
| | ... | namespace=${iperf_client_namespace}
-| | Run Keyword If | '${iperf_client_namespace}' is not '${None}'
+| | Run Keyword If | '${iperf_client_namespace}' != '${None}'
| | ... | Add Default Route To Namespace
| | ... | ${nodes['${iperf_client_node}']}
| | ... | namespace=${iperf_client_namespace}
| | | ... | bind=${iperf_client_bind}
| | | ... | affinity=${iperf_client_affinity}
| | | ${conv} = | Convert To Number | ${rr['sum_received']['bits_per_second']}
+| | | Append Mrr Value | ${conv} | ${export_mrr_unit}
| | | ${conv} = | Evaluate | ${conv} / ${1000} / ${1000} / ${1000}
| | | ${conv} = | Evaluate | "{:.3f}".format(${conv})
| | | Append To List
| | ... | transaction_scale=${transaction_scale}
| | ... | transaction_type=${transaction_type}
| | ... | use_latency=${use_latency}
-| | # TODO: Ramp-up?
| Stop Running Traffic
| | [Documentation]
| |
| | ... | \| Traffic should pass with maximum rate \|
| |
+| | Set Test Variable | ${telemetry_rate} | mrr
+| | Set Test Variable | ${telemetry_export} | ${True}
| | ${max_rate} = | Get Max Rate
| | ${transaction_type} = | Get Transaction Type
| | ${trial_duration} = | Get Mrr Trial Duration
| | ${trial_multiplicity} = | Get Mrr Trial Multiplicity
| | ${use_latency} = | Get Use Latency
-| | # The following also sets \${rate_for_teardown}
+| | ${unit} = | Set Variable If | """_cps""" in """${transaction_type}"""
+| | ... | cps | pps
| | ${results} = | Send traffic at specified rate
| | ... | rate=${max_rate}
| | ... | trial_duration=${trial_duration}
| | ... | trial_multiplicity=${trial_multiplicity}
| | ... | use_latency=${use_latency}
| | ... | duration_limit=${0.0}
-| | ${unit} = | Set Variable If | """_cps""" in """${transaction_type}"""
+| | ... | export_mrr_unit=${unit}
+| | ${unit_text} = | Set Variable If | """_cps""" in """${transaction_type}"""
| | ... | estimated connections per second | packets per second
| | Set Test Message | ${\n}Maximum Receive Rate trial results
-| | Set Test Message | in ${unit}: ${results}
+| | Set Test Message | in ${unit_text}: ${results}
| | ... | append=yes
| | Fail if no traffic forwarded