print "IPv6: start_ip is greater then end_ip"
sys.exit(2)
- max_p1 = abs(int(lo1) - int(lo2)) + 1
+ max_p1 = abs(int(lo1) - int(lo2))
base_p1 = lo1
except AddressValueError as ex_error:
print ex_error
p2_src_end_ip = traffic_options['p2_src_end_ip']
p2_dst_start_ip = traffic_options['p2_dst_start_ip']
- base_p1, max_p1 = get_start_end_ipv6(p1_src_start_ip, p1_src_end_ip)
- base_p2, max_p2 = get_start_end_ipv6(p2_src_start_ip, p2_src_end_ip)
+ p1_dst_end_ip = traffic_options['p1_dst_end_ip']
+ p2_dst_end_ip = traffic_options['p2_dst_end_ip']
base_pkt_a = Ether()/IPv6(src=p1_src_start_ip, dst=p1_dst_start_ip)
base_pkt_b = Ether()/IPv6(src=p2_src_start_ip, dst=p2_dst_start_ip)
- # The following code applies raw instructions to packet (IP src increment).
- # It splits the generated traffic by "ip_src" variable to cores
- vm1 = STLScVmRaw([STLVmFlowVar(name="ipv6_src",
- min_value=base_p1,
- max_value=max_p1+base_p1,
- size=8, op="inc"),
- STLVmWrFlowVar(fv_name="ipv6_src", pkt_offset="IPv6.src",
- offset_fixup=8)
- ]
- , split_by_field="ipv6_src")
-
- # The following code applies raw instructions to packet (IP src increment).
- # It splits the generated traffic by "ip_src" variable to cores
- vm2 = STLScVmRaw([STLVmFlowVar(name="ipv6_src",
- min_value=base_p2,
- max_value=max_p2+base_p2,
- size=8, op="inc"),
- STLVmWrFlowVar(fv_name="ipv6_src", pkt_offset="IPv6.src",
- offset_fixup=8)
- ]
- , split_by_field="ipv6_src")
+ # The following code applies raw instructions to packet (IP src/dst
+ # increment). It splits the generated traffic by "ip_src"/"ip_dst" variable
+ # to cores.
+ if p1_dst_end_ip and p2_dst_end_ip:
+ base_p1, max_p1 = get_start_end_ipv6(p1_dst_start_ip, p1_dst_end_ip)
+ base_p2, max_p2 = get_start_end_ipv6(p2_dst_start_ip, p2_dst_end_ip)
+
+ vm1 = STLScVmRaw([STLVmFlowVar(name="ipv6_dst",
+ min_value=base_p1,
+ max_value=max_p1+base_p1,
+ size=8, op="inc"),
+ STLVmWrFlowVar(fv_name="ipv6_dst",
+ pkt_offset="IPv6.dst",
+ offset_fixup=8)
+ ]
+ , split_by_field="ipv6_dst")
+ vm2 = STLScVmRaw([STLVmFlowVar(name="ipv6_dst",
+ min_value=base_p2,
+ max_value=max_p2+base_p2,
+ size=8, op="inc"),
+ STLVmWrFlowVar(fv_name="ipv6_dst",
+ pkt_offset="IPv6.dst",
+ offset_fixup=8)
+ ]
+ , split_by_field="ipv6_dst")
+ else:
+ base_p1, max_p1 = get_start_end_ipv6(p1_src_start_ip, p1_src_end_ip)
+ base_p2, max_p2 = get_start_end_ipv6(p2_src_start_ip, p2_src_end_ip)
+
+ vm1 = STLScVmRaw([STLVmFlowVar(name="ipv6_src",
+ min_value=base_p1,
+ max_value=max_p1+base_p1,
+ size=8, op="inc"),
+ STLVmWrFlowVar(fv_name="ipv6_src",
+ pkt_offset="IPv6.src",
+ offset_fixup=8)
+ ]
+ , split_by_field="ipv6_src")
+ vm2 = STLScVmRaw([STLVmFlowVar(name="ipv6_src",
+ min_value=base_p2,
+ max_value=max_p2+base_p2,
+ size=8, op="inc"),
+ STLVmWrFlowVar(fv_name="ipv6_src",
+ pkt_offset="IPv6.src",
+ offset_fixup=8)
+ ]
+ , split_by_field="ipv6_src")
return create_streams_v46(base_pkt_a, base_pkt_b, vm1, vm2, frame_size)