gtpu_encap_trace_t * t
= va_arg (*args, gtpu_encap_trace_t *);
- s = format (s, "GTPU encap to gtpu_tunnel%d teid %d",
- t->tunnel_index, t->teid);
+ s = format (s, "GTPU encap to gtpu_tunnel%d tteid %d",
+ t->tunnel_index, t->tteid);
return s;
}
is_ipv6 ? im6->fibs[t->encap_fib_index].ft_table_id :
im4->fibs[t->encap_fib_index].ft_table_id;
- s = format (s, "[%d] src %U dst %U teid %d encap-vrf-id %d sw-if-idx %d ",
+ s = format (s, "[%d] src %U dst %U teid %d tteid %d "
+ "encap-vrf-id %d sw-if-idx %d ",
t - ngm->tunnels,
format_ip46_address, &t->src, IP46_TYPE_ANY,
format_ip46_address, &t->dst, IP46_TYPE_ANY,
- t->teid, encap_vrf_id, t->sw_if_index);
+ t->teid, t->tteid, encap_vrf_id, t->sw_if_index);
s = format (s, "encap-dpo-idx %d ", t->next_dpo.dpoi_index);
s = format (s, "decap-next-%U ", format_decap_next, t->decap_next_index);
#define foreach_copy_field \
-_(teid) \
+_(teid) \
+_(tteid) \
_(mcast_sw_if_index) \
_(encap_fib_index) \
_(decap_next_index) \
/* GTPU header */
gtpu->ver_flags = GTPU_V1_VER | GTPU_PT_GTP;
gtpu->type = GTPU_TYPE_GTPU;
- gtpu->teid = clib_host_to_net_u32 (t->teid);
+ gtpu->teid = clib_host_to_net_u32 (t->tteid);
t->rewrite = r.rw;
/* Now only support 8-byte gtpu header. TBD */
hash_unset_mem_free (>pu_main.mcast_shared, dst);
}
-int vnet_gtpu_add_del_tunnel
- (vnet_gtpu_add_del_tunnel_args_t * a, u32 * sw_if_indexp)
+int vnet_gtpu_add_mod_del_tunnel
+ (vnet_gtpu_add_mod_del_tunnel_args_t * a, u32 * sw_if_indexp)
{
gtpu_main_t *gtm = >pu_main;
gtpu_tunnel_t *t = 0;
p = hash_get_mem (gtm->gtpu6_tunnel_by_key, &key6);
}
- if (a->is_add)
+ if (a->opn == GTPU_ADD_TUNNEL)
{
l2input_main_t *l2im = &l2input_main;
foreach_copy_field;
#undef _
+ /* default to same as local rx teid */
+ if (t->tteid == 0)
+ t->tteid = t->teid;
+
ip_udp_gtpu_rewrite (t, is_ip6);
/* clear the flow index */
}
else
{
- /* deleting a tunnel: tunnel must exist */
+ /* mod-tteid or deleting a tunnel: tunnel must exist */
if (!p)
return VNET_API_ERROR_NO_SUCH_ENTRY;
t = pool_elt_at_index (gtm->tunnels, p[0]);
sw_if_index = t->sw_if_index;
+ if (a->opn == GTPU_UPD_TTEID)
+ {
+ if (a->tteid == 0)
+ return VNET_API_ERROR_INVALID_VALUE;
+ t->tteid = a->tteid;
+ ip_udp_gtpu_rewrite (t, is_ip6);
+ return 0;
+ }
+
+ /* delete tunnel */
vnet_sw_interface_set_flags (vnm, t->sw_if_index, 0 /* down */ );
vnet_sw_interface_t *si = vnet_get_sw_interface (vnm, t->sw_if_index);
si->flags |= VNET_SW_INTERFACE_FLAG_HIDDEN;
if (sw_if_indexp)
*sw_if_indexp = sw_if_index;
- if (a->is_add)
+ if (a->opn == GTPU_ADD_TUNNEL)
{
/* register udp ports */
if (!is_ip6 && !udp_is_valid_dst_port (UDP_DST_PORT_GTPU, 1))
{
unformat_input_t _line_input, *line_input = &_line_input;
ip46_address_t src, dst;
- u8 is_add = 1;
+ u8 opn = GTPU_ADD_TUNNEL;
u8 src_set = 0;
u8 dst_set = 0;
u8 grp_set = 0;
u32 encap_fib_index = 0;
u32 mcast_sw_if_index = ~0;
u32 decap_next_index = GTPU_INPUT_NEXT_L2_INPUT;
- u32 teid = 0;
+ u32 teid = 0, tteid = 0;
u32 tmp;
int rv;
- vnet_gtpu_add_del_tunnel_args_t _a, *a = &_a;
+ vnet_gtpu_add_mod_del_tunnel_args_t _a, *a = &_a;
u32 tunnel_sw_if_index;
clib_error_t *error = NULL;
{
if (unformat (line_input, "del"))
{
- is_add = 0;
+ opn = GTPU_DEL_TUNNEL;
}
else if (unformat (line_input, "src %U",
unformat_ip4_address, &src.ip4))
;
else if (unformat (line_input, "teid %d", &teid))
;
+ else if (unformat (line_input, "tteid %d", &tteid))
+ ;
+ else if (unformat (line_input, "upd-tteid %d", &tteid))
+ opn = GTPU_UPD_TTEID;
else
{
error = clib_error_return (0, "parse error: '%U'",
}
}
- if (src_set == 0)
+ if (teid == 0)
+ {
+ error = clib_error_return (0, "tunnel teid specified");
+ goto done;
+ }
+
+ if (src_set == 0 && opn == GTPU_ADD_TUNNEL)
{
error = clib_error_return (0, "tunnel src address not specified");
goto done;
clib_memset (a, 0, sizeof (*a));
- a->is_add = is_add;
+ a->opn = opn;
#define _(x) a->x = x;
foreach_copy_field;
#undef _
- rv = vnet_gtpu_add_del_tunnel (a, &tunnel_sw_if_index);
+ rv = vnet_gtpu_add_mod_del_tunnel (a, &tunnel_sw_if_index);
switch (rv)
{
case 0:
- if (is_add)
+ if (opn == GTPU_ADD_TUNNEL)
vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name,
vnet_get_main (), tunnel_sw_if_index);
break;
error = clib_error_return (0, "tunnel does not exist...");
goto done;
+ case VNET_API_ERROR_INVALID_VALUE:
+ error = clib_error_return (0, "tx teid not specified...");
+ goto done;
+
default:
error = clib_error_return
(0, "vnet_gtpu_add_del_tunnel returned %d", rv);
/*?
* Add or delete a GTPU Tunnel.
*
- * GTPU provides the features needed to allow L2 bridge domains (BDs)
+ * GTPU can be used to transport Ethernet packets as its PDU type to
+ * provides allow L2 network or bridge domains (BDs)
* to span multiple servers. This is done by building an L2 overlay on
* top of an L3 network underlay using GTPU tunnels.
*
- * This makes it possible for servers to be co-located in the same data
- * center or be separated geographically as long as they are reachable
- * through the underlay L3 network.
- *
- * You can refer to this kind of L2 overlay bridge domain as a GTPU
- * (Virtual eXtensible VLAN) segment.
+ * GTPU can also be used to transport IP packetes as its PDU type to
+ * allow IP forwarding over underlay network, e.g. between RAN and UPF
+ * for mobility deplyments.
*
* @cliexpar
* Example of how to create a GTPU Tunnel:
- * @cliexcmd{create gtpu tunnel src 10.0.3.1 dst 10.0.3.3 teid 13 encap-vrf-id 7}
+ * @cliexcmd{create gtpu tunnel src 10.0.3.1 dst 10.0.3.3 teid 13 tteid 55 encap-vrf-id 7}
* Example of how to delete a GTPU Tunnel:
- * @cliexcmd{create gtpu tunnel src 10.0.3.1 dst 10.0.3.3 teid 13 del}
+ * @cliexcmd{create gtpu tunnel src 10.0.3.1 dst 10.0.3.3 teid 13 encap-vrf-id 7 del}
+ * Example of how to update tx TEID of a GTPU Tunnel:
+ * @cliexcmd{create gtpu tunnel src 10.0.3.1 dst 10.0.3.3 encap-vrf-id 7 upd-tteid 55}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (create_gtpu_tunnel_command, static) = {
.path = "create gtpu tunnel",
.short_help =
- "create gtpu tunnel src <local-vtep-addr>"
- " {dst <remote-vtep-addr>|group <mcast-vtep-addr> <intf-name>} teid <nn>"
- " [encap-vrf-id <nn>] [decap-next [l2|ip4|ip6|node <name>]] [del]",
+ "create gtpu tunnel src <local-tep-addr>"
+ " {dst <remote-tep-addr>|group <mcast-addr> <intf-name>}"
+ " teid <nn> [tteid <nn>] [encap-vrf-id <nn>]"
+ " [decap-next [l2|ip4|ip6|node <name>]] [del | upd-tteid <nn>]",
.function = gtpu_add_del_tunnel_command_fn,
};
/* *INDENT-ON* */
* @cliexpar
* Example of how to display the GTPU Tunnel entries:
* @cliexstart{show gtpu tunnel}
- * [0] src 10.0.3.1 dst 10.0.3.3 teid 13 encap_fib_index 0 sw_if_index 5 decap_next l2
+ * [0] src 10.0.3.1 dst 10.0.3.3 teid 13 tx-teid 55 encap_fib_index 0 sw_if_index 5 decap_next l2
* @cliexend
?*/
/* *INDENT-OFF* */
+ sizeof (ip4_header_t) + sizeof (udp_header_t),
.type = VNET_FLOW_TYPE_IP4_GTPU,
.ip4_gtpu = {
- .protocol = IP_PROTOCOL_UDP,
+ .protocol.prot = IP_PROTOCOL_UDP,
.src_addr.addr = t->dst.ip4,
.src_addr.mask.as_u32 = ~0,
.dst_addr.addr = t->src.ip4,