-#!/usr/bin/env python
+#!/usr/bin/env python3
import ipaddress
import unittest
-from ipaddress import IPv6Network, IPv4Network
from framework import VppTestCase, VppTestRunner
from vpp_ip import DpoProto
from vpp_ip_route import VppIpRoute, VppRoutePath
-from util import fragment_rfc791
+from util import fragment_rfc791, fragment_rfc8200
import scapy.compat
from scapy.layers.l2 import Ether, Raw
self.assertEqual(rv[0].tag, tag,
"output produced incorrect tag value.")
- def test_map_e(self):
- """ MAP-E """
+ def test_map_e_udp(self):
+ """ MAP-E UDP"""
#
# Add a route to the MAP-BR
v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.remote_ip4) /
UDP(sport=20000, dport=10000) /
- Raw('\xa5' * 100))
- rx = self.send_and_expect(self.pg0, v4*1, self.pg0)
+ Raw(b'\xa5' * 100))
+ rx = self.send_and_expect(self.pg0, v4 * 4, self.pg0)
v4_reply = v4[1]
v4_reply.ttl -= 1
for p in rx:
v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst='192.168.1.1') /
UDP(sport=20000, dport=10000) /
- Raw('\xa5' * 100))
+ Raw(b'\xa5' * 100))
- self.send_and_assert_encapped_one(v4, "3000::1", map_translated_addr)
+ self.send_and_assert_encapped(v4 * 4, "3000::1", map_translated_addr)
#
# Verify reordered fragments are able to pass as well
v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(id=1, src=self.pg0.remote_ip4, dst='192.168.1.1') /
UDP(sport=20000, dport=10000) /
- Raw('\xa5' * 1000))
+ Raw(b'\xa5' * 1000))
frags = fragment_rfc791(v4, 400)
frags.reverse()
v6 = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) /
IPv6(src=self.pg1.remote_ip6, dst=self.pg1.remote_ip6) /
UDP(sport=20000, dport=10000) /
- Raw('\xa5' * 100))
+ Raw(b'\xa5' * 100))
rx = self.send_and_expect(self.pg1, v6*1, self.pg1)
v6_reply = v6[1]
v6_reply.hlim -= 1
IPv6(dst='3000::1', src=map_translated_addr) /
IP(dst=self.pg0.remote_ip4, src='192.168.1.1') /
UDP(sport=10000, dport=20000) /
- Raw('\xa5' * 100))
+ Raw(b'\xa5' * 100))
self.pg1.add_stream(p)
#
p = (IP(id=1, dst=self.pg0.remote_ip4, src='192.168.1.1') /
UDP(sport=10000, dport=20000) /
- Raw('\xa5' * 1500))
+ Raw(b'\xa5' * 1500))
frags = fragment_rfc791(p, 400)
frags.reverse()
rx = self.pg0.get_capture(len(frags))
+ for r in rx:
+ self.assertFalse(r.haslayer(IPv6))
+ self.assertEqual(r[IP].src, p[IP].src)
+ self.assertEqual(r[IP].dst, p[IP].dst)
+
+ # Verify that fragments pass even if ipv6 layer is fragmented
+ stream = (IPv6(dst='3000::1', src=map_translated_addr) / x
+ for x in frags)
+
+ v6_stream = [
+ Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / x
+ for i in range(len(frags))
+ for x in fragment_rfc8200(
+ IPv6(dst='3000::1', src=map_translated_addr) / frags[i],
+ i, 200)]
+
+ self.pg1.add_stream(v6_stream)
+
+ self.pg_enable_capture(self.pg_interfaces)
+ self.pg_start()
+
+ rx = self.pg0.get_capture(len(frags))
+
for r in rx:
self.assertFalse(r.haslayer(IPv6))
self.assertEqual(r[IP].src, p[IP].src)
pre_res_route.remove_vpp_config()
self.vapi.ppcli("map params pre-resolve del ip6-nh 4001::1")
+ def test_map_e_inner_frag(self):
+ """ MAP-E Inner fragmentation """
+
+ #
+ # Add a route to the MAP-BR
+ #
+ map_br_pfx = "2001::"
+ map_br_pfx_len = 32
+ map_route = VppIpRoute(self,
+ map_br_pfx,
+ map_br_pfx_len,
+ [VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)])
+ map_route.add_vpp_config()
+
+ #
+ # Add a domain that maps from pg0 to pg1
+ #
+ map_dst = '2001::/32'
+ map_src = '3000::1/128'
+ client_pfx = '192.168.0.0/16'
+ map_translated_addr = '2001:0:101:7000:0:c0a8:101:7'
+ tag = 'MAP-E tag.'
+ self.vapi.map_add_domain(ip4_prefix=client_pfx,
+ ip6_prefix=map_dst,
+ ip6_src=map_src,
+ ea_bits_len=20,
+ psid_offset=4,
+ psid_length=4,
+ mtu=1000,
+ tag=tag)
+
+ # Enable MAP on interface.
+ self.vapi.map_if_enable_disable(is_enable=1,
+ sw_if_index=self.pg0.sw_if_index,
+ is_translation=0)
+
+ # Enable inner fragmentation
+ self.vapi.map_param_set_fragmentation(inner=1)
+
+ v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
+ IP(src=self.pg0.remote_ip4, dst='192.168.1.1') /
+ UDP(sport=20000, dport=10000) /
+ Raw(b'\xa5' * 1300))
+
+ self.pg_send(self.pg0, v4*1)
+ rx = self.pg1.get_capture(2)
+
+ frags = fragment_rfc791(v4[1], 1000)
+ frags[0].id = 0
+ frags[1].id = 0
+ frags[0].ttl -= 1
+ frags[1].ttl -= 1
+ frags[0].chksum = 0
+ frags[1].chksum = 0
+
+ v6_reply1 = (IPv6(src='3000::1', dst=map_translated_addr, hlim=63) /
+ frags[0])
+ v6_reply2 = (IPv6(src='3000::1', dst=map_translated_addr, hlim=63) /
+ frags[1])
+ rx[0][1].fl = 0
+ rx[1][1].fl = 0
+ rx[0][1][IP].id = 0
+ rx[1][1][IP].id = 0
+ rx[0][1][IP].chksum = 0
+ rx[1][1][IP].chksum = 0
+
+ self.validate(rx[0][1], v6_reply1)
+ self.validate(rx[1][1], v6_reply2)
+
+ def test_map_e_tcp_mss(self):
+ """ MAP-E TCP MSS"""
+
+ #
+ # Add a route to the MAP-BR
+ #
+ map_br_pfx = "2001::"
+ map_br_pfx_len = 32
+ map_route = VppIpRoute(self,
+ map_br_pfx,
+ map_br_pfx_len,
+ [VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)])
+ map_route.add_vpp_config()
+
+ #
+ # Add a domain that maps from pg0 to pg1
+ #
+ map_dst = '2001::/32'
+ map_src = '3000::1/128'
+ client_pfx = '192.168.0.0/16'
+ map_translated_addr = '2001:0:101:5000:0:c0a8:101:5'
+ tag = 'MAP-E TCP tag.'
+ self.vapi.map_add_domain(ip4_prefix=client_pfx,
+ ip6_prefix=map_dst,
+ ip6_src=map_src,
+ ea_bits_len=20,
+ psid_offset=4,
+ psid_length=4,
+ tag=tag)
+
+ # Enable MAP on pg0 interface.
+ self.vapi.map_if_enable_disable(is_enable=1,
+ sw_if_index=self.pg0.sw_if_index,
+ is_translation=0)
+
+ # Enable MAP on pg1 interface.
+ self.vapi.map_if_enable_disable(is_enable=1,
+ sw_if_index=self.pg1.sw_if_index,
+ is_translation=0)
+
+ # TCP MSS clamping
+ mss_clamp = 1300
+ self.vapi.map_param_set_tcp(mss_clamp)
+
+ #
+ # Send a v4 packet that will be encapped.
+ #
+ p_ether = Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac)
+ p_ip4 = IP(src=self.pg0.remote_ip4, dst='192.168.1.1')
+ p_tcp = TCP(sport=20000, dport=30000, flags="S",
+ options=[("MSS", 1455)])
+ p4 = p_ether / p_ip4 / p_tcp
+
+ self.pg1.add_stream(p4)
+ self.pg_enable_capture(self.pg_interfaces)
+ self.pg_start()
+
+ rx = self.pg1.get_capture(1)
+ rx = rx[0]
+
+ self.assertTrue(rx.haslayer(IPv6))
+ self.assertEqual(rx[IP].src, p4[IP].src)
+ self.assertEqual(rx[IP].dst, p4[IP].dst)
+ self.assertEqual(rx[IPv6].src, "3000::1")
+ self.assertEqual(rx[TCP].options,
+ TCP(options=[('MSS', mss_clamp)]).options)
+
def validate(self, rx, expected):
self.assertEqual(rx, expected.__class__(scapy.compat.raw(expected)))
v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.remote_ip4) /
UDP(sport=20000, dport=10000) /
- Raw('\xa5' * 100))
+ Raw(b'\xa5' * 100))
rx = self.send_and_expect(self.pg0, v4*1, self.pg0)
v4_reply = v4[1]
v4_reply.ttl -= 1
v6 = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) /
IPv6(src=self.pg1.remote_ip6, dst=self.pg1.remote_ip6) /
UDP(sport=20000, dport=10000) /
- Raw('\xa5' * 100))
+ Raw(b'\xa5' * 100))
rx = self.send_and_expect(self.pg1, v6*1, self.pg1)
v6_reply = v6[1]
v6_reply.hlim -= 1
Code Review / vpp.git / blobdiff