#include <nat/nat64.h>
#include <nat/nat.h>
+#include <nat/nat_inlines.h>
#include <vnet/fib/fib_table.h>
static clib_error_t *
for (i = 0; i < count; i++)
{
- rv = nat64_add_del_pool_addr (&this_addr, vrf_id, is_add);
+ rv = nat64_add_del_pool_addr (0, &this_addr, vrf_id, is_add);
switch (rv)
{
case VNET_API_ERROR_NO_SUCH_ENTRY:
error =
clib_error_return (0, "%U NAT64 feature not enabled.",
- format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, sw_if_index));
+ format_vnet_sw_if_index_name, vnm,
+ sw_if_index);
goto done;
case VNET_API_ERROR_VALUE_EXIST:
error =
clib_error_return (0, "%U NAT64 feature already enabled.",
- format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, sw_if_index));
+ format_vnet_sw_if_index_name, vnm,
+ vnm, sw_if_index);
goto done;
case VNET_API_ERROR_INVALID_VALUE:
case VNET_API_ERROR_INVALID_VALUE_2:
error =
clib_error_return (0,
"%U NAT64 feature enable/disable failed.",
- format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, sw_if_index));
+ format_vnet_sw_if_index_name, vnm,
+ sw_if_index);
goto done;
default:
break;
case VNET_API_ERROR_NO_SUCH_ENTRY:
error =
clib_error_return (0, "%U NAT64 feature not enabled.",
- format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, sw_if_index));
+ format_vnet_sw_if_index_name, vnm,
+ sw_if_index);
goto done;
case VNET_API_ERROR_VALUE_EXIST:
error =
clib_error_return (0, "%U NAT64 feature already enabled.",
- format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, sw_if_index));
+ format_vnet_sw_if_index_name, vnm,
+ sw_if_index);
goto done;
case VNET_API_ERROR_INVALID_VALUE:
case VNET_API_ERROR_INVALID_VALUE_2:
error =
clib_error_return (0,
"%U NAT64 feature enable/disable failed.",
- format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, sw_if_index));
+ format_vnet_sw_if_index_name, vnm,
+ sw_if_index);
goto done;
default:
break;
vlib_main_t *vm = ctx;
vnet_main_t *vnm = vnet_get_main ();
- vlib_cli_output (vm, " %U %s", format_vnet_sw_interface_name, vnm,
- vnet_get_sw_interface (vnm, i->sw_if_index),
+ vlib_cli_output (vm, " %U %s", format_vnet_sw_if_index_name, vnm,
+ i->sw_if_index,
(nat_interface_is_inside (i)
&& nat_interface_is_outside (i)) ? "in out" :
nat_interface_is_inside (i) ? "in" : "out");
goto done;
case VNET_API_ERROR_INVALID_VALUE:
error =
- clib_error_return (0, "Outside addres %U and port %u already in use.",
+ clib_error_return (0,
+ "Outside address %U and port %u already in use.",
format_ip4_address, &out_addr, out_port);
goto done;
case VNET_API_ERROR_INVALID_VALUE_2:
return error;
}
-static clib_error_t *
-nat64_set_timeouts_command_fn (vlib_main_t * vm, unformat_input_t * input,
- vlib_cli_command_t * cmd)
-{
- unformat_input_t _line_input, *line_input = &_line_input;
- clib_error_t *error = 0;
- u32 timeout, tcp_trans, tcp_est, tcp_incoming_syn;
-
- tcp_trans = nat64_get_tcp_trans_timeout ();
- tcp_est = nat64_get_tcp_est_timeout ();
- tcp_incoming_syn = nat64_get_tcp_incoming_syn_timeout ();
-
- if (!unformat_user (input, unformat_line_input, line_input))
- return 0;
-
- while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
- {
- if (unformat (line_input, "udp %u", &timeout))
- {
- if (nat64_set_udp_timeout (timeout))
- {
- error = clib_error_return (0, "Invalid UDP timeout value");
- goto done;
- }
- }
- else if (unformat (line_input, "icmp %u", &timeout))
- {
- if (nat64_set_icmp_timeout (timeout))
- {
- error = clib_error_return (0, "Invalid ICMP timeout value");
- goto done;
- }
- }
- else if (unformat (line_input, "tcp-trans %u", &tcp_trans))
- {
- if (nat64_set_tcp_timeouts (tcp_trans, tcp_est, tcp_incoming_syn))
- {
- error =
- clib_error_return (0,
- "Invalid TCP transitory timeouts value");
- goto done;
- }
- }
- else if (unformat (line_input, "tcp-est %u", &tcp_est))
- {
- if (nat64_set_tcp_timeouts (tcp_trans, tcp_est, tcp_incoming_syn))
- {
- error =
- clib_error_return (0,
- "Invalid TCP established timeouts value");
- goto done;
- }
- }
- else
- if (unformat (line_input, "tcp-incoming-syn %u", &tcp_incoming_syn))
- {
- if (nat64_set_tcp_timeouts (tcp_trans, tcp_est, tcp_incoming_syn))
- {
- error =
- clib_error_return (0,
- "Invalid TCP incoming SYN timeouts value");
- goto done;
- }
- }
- else if (unformat (line_input, "reset"))
- {
- nat64_set_udp_timeout (0);
- nat64_set_icmp_timeout (0);
- nat64_set_tcp_timeouts (0, 0, 0);
- }
- else
- {
- error = clib_error_return (0, "unknown input '%U'",
- format_unformat_error, line_input);
- goto done;
- }
- }
-
-done:
- unformat_free (line_input);
-
- return error;
-}
-
-static clib_error_t *
-nat64_show_timeouts_command_fn (vlib_main_t * vm, unformat_input_t * input,
- vlib_cli_command_t * cmd)
-{
- vlib_cli_output (vm, "NAT64 session timeouts:");
- vlib_cli_output (vm, " UDP %usec", nat64_get_udp_timeout ());
- vlib_cli_output (vm, " ICMP %usec", nat64_get_icmp_timeout ());
- vlib_cli_output (vm, " TCP transitory %usec",
- nat64_get_tcp_trans_timeout ());
- vlib_cli_output (vm, " TCP established %usec",
- nat64_get_tcp_est_timeout ());
- vlib_cli_output (vm, " TCP incoming SYN %usec",
- nat64_get_tcp_incoming_syn_timeout ());
-
- return 0;
-}
-
typedef struct nat64_cli_st_walk_ctx_t_
{
vlib_main_t *vm;
{
fib_index =
fib_table_find_or_create_and_lock (FIB_PROTOCOL_IP6,
- vrf_id, FIB_SOURCE_PLUGIN_HI);
+ vrf_id, nat_fib_src_hi);
fib_table_entry_update_one_path (fib_index, &fibpfx,
- FIB_SOURCE_PLUGIN_HI,
+ nat_fib_src_hi,
FIB_ENTRY_FLAG_NONE,
DPO_PROTO_IP6, NULL,
sw_if_index, ~0, 0,
{
fib_index = fib_table_find (FIB_PROTOCOL_IP6, vrf_id);
fib_table_entry_path_remove (fib_index, &fibpfx,
- FIB_SOURCE_PLUGIN_HI,
+ nat_fib_src_hi,
DPO_PROTO_IP6, NULL,
sw_if_index, ~0, 1,
FIB_ROUTE_PATH_INTF_RX);
- fib_table_unlock (fib_index, FIB_PROTOCOL_IP6,
- FIB_SOURCE_PLUGIN_HI);
+ fib_table_unlock (fib_index, FIB_PROTOCOL_IP6, nat_fib_src_hi);
}
}
.function = nat64_show_bib_command_fn,
};
-/*?
- * @cliexpar
- * @cliexstart{set nat64 timeouts}
- * Set NAT64 session timeouts (in seconds).
- * To set NAT64 session timeoutes use use:
- * vpp# set nat64 timeouts udp 200 icmp 30 tcp-trans 250 tcp-est 7450
- * To reset NAT64 session timeoutes to default values use:
- * vpp# set nat64 timeouts reset
- * @cliexend
-?*/
-VLIB_CLI_COMMAND (set_nat64_timeouts_command, static) = {
- .path = "set nat64 timeouts",
- .short_help = "set nat64 timeouts udp <sec> icmp <sec> tcp-trans <sec> "
- "tcp-est <sec> tcp-incoming-syn <sec> | reset",
- .function = nat64_set_timeouts_command_fn,
-};
-
-/*?
- * @cliexpar
- * @cliexstart{show nat64 timeoutss}
- * Show NAT64 session timeouts:
- * vpp# show nat64 timeouts
- * NAT64 session timeouts:
- * UDP 300sec
- * ICMP 60sec
- * TCP transitory 240sec
- * TCP established 7440sec
- * TCP incoming SYN 6sec
- * @cliexend
-?*/
-VLIB_CLI_COMMAND (show_nat64_timeouts_command, static) = {
- .path = "show nat64 timeouts",
- .short_help = "show nat64 timeouts",
- .function = nat64_show_timeouts_command_fn,
-};
-
/*?
* @cliexpar
* @cliexstart{show nat64 session table}