nat: nat66 to plugin
[vpp.git] / src / plugins / nat / nat66_cli.c
diff --git a/src/plugins/nat/nat66_cli.c b/src/plugins/nat/nat66_cli.c
deleted file mode 100644 (file)
index d34c171..0000000
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Copyright (c) 2018 Cisco and/or its affiliates.
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-/**
- * @file
- * @brief NAT66 CLI
- */
-
-#include <nat/nat66.h>
-#include <nat/nat.h>
-#include <vnet/fib/fib_table.h>
-
-static clib_error_t *
-nat66_interface_feature_command_fn (vlib_main_t * vm,
-                                   unformat_input_t * input,
-                                   vlib_cli_command_t * cmd)
-{
-  unformat_input_t _line_input, *line_input = &_line_input;
-  vnet_main_t *vnm = vnet_get_main ();
-  clib_error_t *error = 0;
-  u32 sw_if_index;
-  u32 *inside_sw_if_indices = 0;
-  u32 *outside_sw_if_indices = 0;
-  u8 is_add = 1;
-  int i, rv;
-
-  /* Get a line of input. */
-  if (!unformat_user (input, unformat_line_input, line_input))
-    return 0;
-
-  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
-    {
-      if (unformat (line_input, "in %U", unformat_vnet_sw_interface,
-                   vnm, &sw_if_index))
-       vec_add1 (inside_sw_if_indices, sw_if_index);
-      else if (unformat (line_input, "out %U", unformat_vnet_sw_interface,
-                        vnm, &sw_if_index))
-       vec_add1 (outside_sw_if_indices, sw_if_index);
-      else if (unformat (line_input, "del"))
-       is_add = 0;
-      else
-       {
-         error = clib_error_return (0, "unknown input '%U'",
-                                    format_unformat_error, line_input);
-         goto done;
-       }
-    }
-
-  if (vec_len (inside_sw_if_indices))
-    {
-      for (i = 0; i < vec_len (inside_sw_if_indices); i++)
-       {
-         sw_if_index = inside_sw_if_indices[i];
-         rv = nat66_interface_add_del (sw_if_index, 1, is_add);
-         switch (rv)
-           {
-           case VNET_API_ERROR_NO_SUCH_ENTRY:
-             error =
-               clib_error_return (0, "%U NAT66 feature not enabled.",
-                                  format_vnet_sw_interface_name, vnm,
-                                  vnet_get_sw_interface (vnm, sw_if_index));
-             goto done;
-           case VNET_API_ERROR_VALUE_EXIST:
-             error =
-               clib_error_return (0, "%U NAT66 feature already enabled.",
-                                  format_vnet_sw_interface_name, vnm,
-                                  vnet_get_sw_interface (vnm, sw_if_index));
-             goto done;
-           case VNET_API_ERROR_INVALID_VALUE:
-           case VNET_API_ERROR_INVALID_VALUE_2:
-             error =
-               clib_error_return (0,
-                                  "%U NAT66 feature enable/disable failed.",
-                                  format_vnet_sw_interface_name, vnm,
-                                  vnet_get_sw_interface (vnm, sw_if_index));
-             goto done;
-           default:
-             break;
-
-           }
-       }
-    }
-
-  if (vec_len (outside_sw_if_indices))
-    {
-      for (i = 0; i < vec_len (outside_sw_if_indices); i++)
-       {
-         sw_if_index = outside_sw_if_indices[i];
-         rv = nat66_interface_add_del (sw_if_index, 0, is_add);
-         switch (rv)
-           {
-           case VNET_API_ERROR_NO_SUCH_ENTRY:
-             error =
-               clib_error_return (0, "%U NAT66 feature not enabled.",
-                                  format_vnet_sw_interface_name, vnm,
-                                  vnet_get_sw_interface (vnm, sw_if_index));
-             goto done;
-           case VNET_API_ERROR_VALUE_EXIST:
-             error =
-               clib_error_return (0, "%U NAT66 feature already enabled.",
-                                  format_vnet_sw_interface_name, vnm,
-                                  vnet_get_sw_interface (vnm, sw_if_index));
-             goto done;
-           case VNET_API_ERROR_INVALID_VALUE:
-           case VNET_API_ERROR_INVALID_VALUE_2:
-             error =
-               clib_error_return (0,
-                                  "%U NAT66 feature enable/disable failed.",
-                                  format_vnet_sw_interface_name, vnm,
-                                  vnet_get_sw_interface (vnm, sw_if_index));
-             goto done;
-           default:
-             break;
-
-           }
-       }
-    }
-
-done:
-  unformat_free (line_input);
-  vec_free (inside_sw_if_indices);
-  vec_free (outside_sw_if_indices);
-
-  return error;
-}
-
-static int
-nat66_cli_interface_walk (snat_interface_t * i, void *ctx)
-{
-  vlib_main_t *vm = ctx;
-  vnet_main_t *vnm = vnet_get_main ();
-
-  vlib_cli_output (vm, " %U %s", format_vnet_sw_interface_name, vnm,
-                  vnet_get_sw_interface (vnm, i->sw_if_index),
-                  nat_interface_is_inside (i) ? "in" : "out");
-  return 0;
-}
-
-static clib_error_t *
-nat66_show_interfaces_command_fn (vlib_main_t * vm, unformat_input_t * input,
-                                 vlib_cli_command_t * cmd)
-{
-  vlib_cli_output (vm, "NAT66 interfaces:");
-  nat66_interfaces_walk (nat66_cli_interface_walk, vm);
-
-  return 0;
-}
-
-static clib_error_t *
-nat66_add_del_static_mapping_command_fn (vlib_main_t * vm,
-                                        unformat_input_t * input,
-                                        vlib_cli_command_t * cmd)
-{
-  unformat_input_t _line_input, *line_input = &_line_input;
-  clib_error_t *error = 0;
-  u8 is_add = 1;
-  ip6_address_t l_addr, e_addr;
-  u32 vrf_id = 0;
-  int rv;
-
-  /* Get a line of input. */
-  if (!unformat_user (input, unformat_line_input, line_input))
-    return 0;
-
-  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
-    {
-      if (unformat (line_input, "local %U external %U",
-                   unformat_ip6_address, &l_addr,
-                   unformat_ip6_address, &e_addr))
-       ;
-      else if (unformat (line_input, "vrf %u", &vrf_id))
-       ;
-      else if (unformat (line_input, "del"))
-       is_add = 0;
-      else
-       {
-         error = clib_error_return (0, "unknown input: '%U'",
-                                    format_unformat_error, line_input);
-         goto done;
-       }
-    }
-
-  rv = nat66_static_mapping_add_del (&l_addr, &e_addr, vrf_id, is_add);
-
-  switch (rv)
-    {
-    case VNET_API_ERROR_NO_SUCH_ENTRY:
-      error = clib_error_return (0, "NAT66 static mapping entry not exist.");
-      goto done;
-    case VNET_API_ERROR_VALUE_EXIST:
-      error = clib_error_return (0, "NAT66 static mapping entry exist.");
-      goto done;
-    default:
-      break;
-    }
-
-done:
-  unformat_free (line_input);
-
-  return error;
-}
-
-static int
-nat66_cli_static_mapping_walk (nat66_static_mapping_t * sm, void *ctx)
-{
-  nat66_main_t *nm = &nat66_main;
-  vlib_main_t *vm = ctx;
-  fib_table_t *fib;
-  vlib_counter_t vc;
-
-  fib = fib_table_get (sm->fib_index, FIB_PROTOCOL_IP6);
-  if (!fib)
-    return -1;
-
-  vlib_get_combined_counter (&nm->session_counters, sm - nm->sm, &vc);
-
-  vlib_cli_output (vm, " local %U external %U vrf %d",
-                  format_ip6_address, &sm->l_addr,
-                  format_ip6_address, &sm->e_addr, fib->ft_table_id);
-  vlib_cli_output (vm, "  total pkts %lld, total bytes %lld", vc.packets,
-                  vc.bytes);
-
-  return 0;
-}
-
-static clib_error_t *
-nat66_show_static_mappings_command_fn (vlib_main_t * vm,
-                                      unformat_input_t * input,
-                                      vlib_cli_command_t * cmd)
-{
-  vlib_cli_output (vm, "NAT66 static mappings:");
-  nat66_static_mappings_walk (nat66_cli_static_mapping_walk, vm);
-  return 0;
-}
-
-/* *INDENT-OFF* */
-/*?
- * @cliexpar
- * @cliexstart{set interface nat66}
- * Enable/disable NAT66 feature on the interface.
- * To enable NAT66 feature with local (IPv6) network interface
- * GigabitEthernet0/8/0 and external (IPv4) network interface
- * GigabitEthernet0/a/0 use:
- *  vpp# set interface nat66 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0
- * @cliexend
-?*/
-VLIB_CLI_COMMAND (set_interface_nat66_command, static) = {
-  .path = "set interface nat66",
-  .short_help = "set interface nat66 in|out <intfc> [del]",
-  .function = nat66_interface_feature_command_fn,
-};
-
-/*?
- * @cliexpar
- * @cliexstart{show nat66 interfaces}
- * Show interfaces with NAT66 feature.
- * To show interfaces with NAT66 feature use:
- *  vpp# show nat66 interfaces
- *  NAT66 interfaces:
- *   GigabitEthernet0/8/0 in
- *   GigabitEthernet0/a/0 out
- * @cliexend
-?*/
-VLIB_CLI_COMMAND (show_nat66_interfaces_command, static) = {
-  .path = "show nat66 interfaces",
-  .short_help = "show nat66 interfaces",
-  .function = nat66_show_interfaces_command_fn,
-};
-
-/*?
- * @cliexpar
- * @cliexstart{nat66 add static mapping}
- * Add/delete NAT66 static mapping entry.
- * To add NAT66 static mapping entry use:
- *  vpp# nat66 add static mapping local fd01:1::4 external 2001:db8:c000:223::
- *  vpp# nat66 add static mapping local fd01:1::2 external 2001:db8:c000:221:: vrf 10
- * @cliexend
-?*/
-VLIB_CLI_COMMAND (show_nat66_add_del_static_mapping_command, static) = {
-  .path = "nat66 add static mapping",
-  .short_help = "nat66 add static mapping local <ip6-addr> external <ip6-addr>"
-                " [vfr <table-id>] [del]",
-  .function = nat66_add_del_static_mapping_command_fn,
-};
-
-/*?
- * @cliexpar
- * @cliexstart{show nat66 static mappings}
- * Show NAT66 static mappings.
- * To show NAT66 static mappings use:
- *  vpp# show nat66 static mappings
- *  NAT66 static mappings:
- *   local fd01:1::4 external 2001:db8:c000:223:: vrf 0
- *   local fd01:1::2 external 2001:db8:c000:221:: vrf 10
- * @cliexend
-?*/
-VLIB_CLI_COMMAND (show_nat66_static_mappings_command, static) = {
-  .path = "show nat66 static mappings",
-  .short_help = "show nat66 static mappings",
-  .function = nat66_show_static_mappings_command_fn,
-};
-
-/*
- * fd.io coding-style-patch-verification: ON
- *
- * Local Variables:
- * eval: (c-set-style "gnu")
- * End:
- */