@param is_ip4 - 1 if address type is IPv4
@param first_ip_address - first IP address
@param last_ip_address - last IP address
+ @param vrf_id - VRF id of tenant, ~0 means independent of VRF
@param is_add - 1 if add, 0 if delete
*/
-define snat_add_address_range {
+autoreply define snat_add_address_range {
u32 client_index;
u32 context;
u8 is_ip4;
u8 first_ip_address[16];
u8 last_ip_address[16];
+ u32 vrf_id;
u8 is_add;
};
-/** \brief Add S-NAT address range reply
- @param context - sender context, to match reply w/ request
- @param retval - return code
-*/
-define snat_add_address_range_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Dump S-NAT addresses
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param context - sender context, to match reply w/ request
@param is_ip4 - 1 if address type is IPv4
@param ip_address - IP address
+ @param vrf_id - VRF id of tenant, ~0 means independent of VRF
*/
define snat_address_details {
u32 context;
u8 is_ip4;
u8 ip_address[16];
+ u32 vrf_id;
};
/** \brief Enable/disable S-NAT feature on the interface
@param is_inside - 1 if inside, 0 if outside
@param sw_if_index - software index of the interface
*/
-define snat_interface_add_del_feature {
+autoreply define snat_interface_add_del_feature {
u32 client_index;
u32 context;
u8 is_add;
u32 sw_if_index;
};
-/** \brief Enable/disable S-NAT feature on the interface reply
- @param context - sender context, to match reply w/ request
- @param retval - return code
-*/
-define snat_interface_add_del_feature_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Dump interfaces with S-NAT feature
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param local_port - local port number
@param external_port - external port number
@param external_sw_if_index - external interface (if set
- external_ip_address is ignored)
+ external_ip_address is ignored, ~0 means not
+ used)
@param vfr_id - VRF ID
*/
-define snat_add_static_mapping {
+autoreply define snat_add_static_mapping {
u32 client_index;
u32 context;
u8 is_add;
u32 vrf_id;
};
-/** \brief Add/delete S-NAT static mapping reply
- @param context - sender context, to match reply w/ request
- @param retval - return code
-*/
-define snat_add_static_mapping_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Dump S-NAT static mappings
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param retval - return code for the request
@param static_mapping_only - if 1 dynamic translations disabled
@param static_mapping_connection_tracking - if 1 create session data
+ @param deterministic - if 1 deterministic mapping
@param translation_buckets - number of translation hash buckets
@param translation_memory_size - translation hash memory size
@param user_buckets - number of user hash buckets
i32 retval;
u8 static_mapping_only;
u8 static_mapping_connection_tracking;
+ u8 deterministic;
u32 translation_buckets;
u32 translation_memory_size;
u32 user_buckets;
@param context - sender context, to match reply w/ request
@param worker_mask - S-NAT workers mask
*/
-define snat_set_workers {
+autoreply define snat_set_workers {
u32 client_index;
u32 context;
u64 worker_mask;
};
-/** \brief Set S-NAT workers reply
- @param context - sender context, to match reply w/ request
- @param retval - return code
-*/
-define snat_set_workers_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Dump S-NAT workers
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - 1 if add, 0 if delete
@param sw_if_index - software index of the interface
*/
-define snat_add_del_interface_addr {
+autoreply define snat_add_del_interface_addr {
u32 client_index;
u32 context;
u8 is_add;
u32 sw_if_index;
};
-/** \brief Add/delete S-NAT pool address from specific interfce reply
- @param context - sender context, to match reply w/ request
- @param retval - return code
-*/
-define snat_add_del_interface_addr_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Dump S-NAT pool addresses interfaces
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param src_port - source port number
@param enable - 1 if enable, 0 if disable
*/
-define snat_ipfix_enable_disable {
+autoreply define snat_ipfix_enable_disable {
u32 client_index;
u32 context;
u32 domain_id;
u8 enable;
};
-/** \brief Enable/disable S-NAT IPFIX logging reply
- @param context - sender context, to match reply w/ request
- @param retval - return code
-*/
-define snat_ipfix_enable_disable_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Dump S-NAT users
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
/** \brief S-NAT user's sessions
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
@param user_ip - IP address of the user to dump
@param vrf_id - VRF_ID
*/
define snat_user_session_dump {
u32 client_index;
u32 context;
+ u8 is_ip4;
u8 ip_address[16];
u32 vrf_id;
};
u16 inside_port;
u16 protocol;
u8 is_static;
- f64 last_heard;
+ u64 last_heard;
u64 total_bytes;
u32 total_pkts;
};
+
+/** \brief Add/delete S-NAT deterministic mapping
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - 1 if add, 0 if delete
+ @param is_ip4 - 1 if address type is IPv4
+ @param in_addr - inside IP address
+ @param in_plen - inside IP address prefix length
+ @param out_addr - outside IP address
+ @param out_addr - outside IP address prefix length
+*/
+autoreply define snat_add_det_map {
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ u8 is_ip4;
+ u8 addr_only;
+ u8 in_addr[16];
+ u8 in_plen;
+ u8 out_addr[16];
+ u8 out_plen;
+};
+
+/** \brief Get outside address and port range from inside address
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
+ @param in_addr - inside IP address
+*/
+define snat_det_forward {
+ u32 client_index;
+ u32 context;
+ u8 is_ip4;
+ u8 in_addr[16];
+};
+
+/** \brief Get outside address and port range from inside address
+ @param context - sender context, to match reply w/ request
+ @param retval - return code
+ @param out_port_lo - outside port range start
+ @param out_port_hi - outside port range end
+ @param is_ip4 - 1 if address type is IPv4
+ @param out_addr - outside IP address
+*/
+define snat_det_forward_reply {
+ u32 context;
+ i32 retval;
+ u16 out_port_lo;
+ u16 out_port_hi;
+ u8 is_ip4;
+ u8 out_addr[16];
+};
+
+/** \brief Get inside address from outside address and port
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param out_port - outside port
+ @param is_ip4 - 1 if address type is IPv4
+ @param out_addr - outside IP address
+*/
+define snat_det_reverse {
+ u32 client_index;
+ u32 context;
+ u16 out_port;
+ u8 is_ip4;
+ u8 out_addr[16];
+};
+
+/** \brief Get inside address from outside address and port reply
+ @param context - sender context, to match reply w/ request
+ @param retval - return code
+ @param is_ip4 - 1 if address type is IPv4
+ @param in_addr - inside IP address
+*/
+define snat_det_reverse_reply {
+ u32 context;
+ i32 retval;
+ u8 is_ip4;
+ u8 in_addr[16];
+};
+
+/** \brief Dump S-NAT deterministic mappings
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define snat_det_map_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief S-NAT users response
+ @param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
+ @param in_addr - inside IP address
+ @param in_plen - inside IP address prefix length
+ @param out_addr - outside IP address
+ @param out_plen - outside IP address prefix length
+ @param sharing_ratio - outside to inside address sharing ratio
+ @param ports_per_host - number of ports available to a host
+ @param ses_num - number of sessions belonging to this mapping
+*/
+define snat_det_map_details {
+ u32 context;
+ u8 is_ip4;
+ u8 in_addr[16];
+ u8 in_plen;
+ u8 out_addr[16];
+ u8 out_plen;
+ u32 sharing_ratio;
+ u16 ports_per_host;
+ u32 ses_num;
+};
+
+/** \brief Set values of timeouts for deterministic NAT (seconds, 0 = default)
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param udp - UDP timeout (default 300sec)
+ @param tcp_established - TCP established timeout (default 7440sec)
+ @param tcp_transitory - TCP transitory timeout (default 240sec)
+ @param icmp - ICMP timeout (default 60sec)
+*/
+autoreply define snat_det_set_timeouts {
+ u32 client_index;
+ u32 context;
+ u32 udp;
+ u32 tcp_established;
+ u32 tcp_transitory;
+ u32 icmp;
+};
+
+/** \brief Get values of timeouts for deterministic NAT (seconds)
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define snat_det_get_timeouts {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Get values of timeouts for deterministic NAT reply
+ @param context - sender context, to match reply w/ request
+ @param retval - return code
+ @param udp - UDP timeout (default 300sec)
+ @param tcp_established - TCP established timeout (default 7440sec)
+ @param tcp_transitory - TCP transitory timeout (default 240sec)
+ @param icmp - ICMP timeout (default 60sec)
+*/
+define snat_det_get_timeouts_reply {
+ u32 context;
+ i32 retval;
+ u32 udp;
+ u32 tcp_established;
+ u32 tcp_transitory;
+ u32 icmp;
+};
Code Review / vpp.git / blobdiff