u32 sw_if_index;
};
+/** \brief Enable/disbale S-NAT as an interface output feature (postrouting
+ in2out translation)
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - 1 if add, 0 if delete
+ @param is_inside - 1 if inside, 0 if outside
+ @param sw_if_index - software index of the interface
+*/
+autoreply define snat_interface_add_del_output_feature {
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ u8 is_inside;
+ u32 sw_if_index;
+};
+
+/** \brief Dump interfaces with S-NAT output feature
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define snat_interface_output_feature_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief S-NAT interface with output feature details response
+ @param context - sender context, to match reply w/ request
+ @param is_inside - 1 if inside, 0 if outside
+ @param sw_if_index - software index of the interface
+*/
+define snat_interface_output_feature_details {
+ u32 context;
+ u8 is_inside;
+ u32 sw_if_index;
+};
+
/** \brief Add/delete S-NAT static mapping
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u32 tcp_transitory;
u32 icmp;
};
+
+/** \brief Close CGNAT session by outside address and port
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
+ @param out_addr - outside IP address
+ @param out_port - outside port
+ @param ext_addr - external host address
+ @param ext_port - external host port
+*/
+autoreply define snat_det_close_session_out {
+ u32 client_index;
+ u32 context;
+ u8 is_ip4;
+ u8 out_addr[16];
+ u16 out_port;
+ u8 ext_addr[16];
+ u16 ext_port;
+};
+
+/** \brief Close CGNAT session by inside address and port
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
+ @param in_addr - inside IP address
+ @param in_port - inside port
+ @param ext_addr - external host address
+ @param ext_port - external host port
+*/
+autoreply define snat_det_close_session_in {
+ u32 client_index;
+ u32 context;
+ u8 is_ip4;
+ u8 in_addr[16];
+ u16 in_port;
+ u8 ext_addr[16];
+ u16 ext_port;
+};
+
+/** \brief Dump S-NAT deterministic sessions
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
+ @param user_addr - address of an inside user whose sessions to dump
+*/
+define snat_det_session_dump {
+ u32 client_index;
+ u32 context;
+ u8 is_ip4;
+ u8 user_addr[16];
+};
+
+/** \brief S-NAT deterministic sessions reply
+ @param context - sender context, to match reply w/ request
+ @param is_ip4 - 1 if address type is IPv4
+ @param in_port - inside port
+ @param ext_addr - external host address
+ @param ext_port - external host port
+ @param out_port - outside NAT port
+ @param state - session state
+ @param expire - session expiration timestamp
+*/
+define snat_det_session_details {
+ u32 client_index;
+ u32 context;
+ u8 is_ip4;
+ u16 in_port;
+ u8 ext_addr[16];
+ u16 ext_port;
+ u16 out_port;
+ u8 state;
+ u32 expire;
+};
+
+/** \brief Add/delete address range to NAT64 pool
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param start_addr - start address of the range
+ @param end_addr - end address of the range
+ @param vrf_id - VRF id of tenant, ~0 means independent of VRF
+ @param is_add - 1 if add, 0 if delete
+*/
+autoreply define nat64_add_del_pool_addr_range {
+ u32 client_index;
+ u32 context;
+ u8 start_addr[4];
+ u8 end_addr[4];
+ u32 vrf_id;
+ u8 is_add;
+};
+
+/** \brief Dump NAT64 pool addresses
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define nat64_pool_addr_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief NAT64 pool address details response
+ @param context - sender context, to match reply w/ request
+ @param address - IPv4 address
+ @param vfr_id - VRF id of tenant, ~0 means independent of VRF
+*/
+define nat64_pool_addr_details {
+ u32 context;
+ u8 address[4];
+ u32 vrf_id;
+};
+
+/** \brief Enable/disable NAT64 feature on the interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - index of the interface
+ @param is_inside - 1 if inside, 0 if outside
+ @param is_add - 1 if add, 0 if delete
+*/
+autoreply define nat64_add_del_interface {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 is_inside;
+ u8 is_add;
+};
+
+/** \brief Dump interfaces with NAT64 feature
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define nat64_interface_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief NAT64 interface details response
+ @param context - sender context, to match reply w/ request
+ @param is_inside - 1 if inside, 0 if outside
+ @param sw_if_index - index of the interface
+*/
+define nat64_interface_details {
+ u32 context;
+ u8 is_inside;
+ u32 sw_if_index;
+};
+
+/** \brief Add/delete NAT64 static BIB entry
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param i_addr - inside IPv6 address
+ @param o_addr - outside IPv4 address
+ @param i_port - inside port number
+ @param o_port - outside port number
+ @param vrf_id - VRF id of tenant
+ @param proto - protocol number
+ @param is_add - 1 if add, 0 if delete
+*/
+ autoreply define nat64_add_del_static_bib {
+ u32 client_index;
+ u32 context;
+ u8 i_addr[16];
+ u8 o_addr[4];
+ u16 i_port;
+ u16 o_port;
+ u32 vrf_id;
+ u8 proto;
+ u8 is_add;
+};
+
+/** \brief Dump NAT64 BIB
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param proto - protocol of the BIB
+*/
+define nat64_bib_dump {
+ u32 client_index;
+ u32 context;
+ u8 proto;
+};
+
+/** \brief NAT64 BIB details response
+ @param context - sender context, to match reply w/ request
+ @param i_addr - inside IPv6 address
+ @param o_addr - outside IPv4 address
+ @param i_port - inside port number
+ @param o_port - outside port number
+ @param vrf_id - VRF id of tenant
+ @param proto - protocol number
+ @param is_static - 1 if static BIB entry, 0 if dynamic
+ @param ses_num - number of sessions associated with the BIB entry
+*/
+define nat64_bib_details {
+ u32 context;
+ u8 i_addr[16];
+ u8 o_addr[4];
+ u16 i_port;
+ u16 o_port;
+ u32 vrf_id;
+ u8 proto;
+ u8 is_static;
+ u32 ses_num;
+};
+
+/** \brief Set values of timeouts for NAT64 (seconds, 0 = default)
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param udp - UDP timeout (default 300sec)
+ @param icmp - ICMP timeout (default 60sec)
+ @param tcp_trans - TCP transitory timeout (default 240sec)
+ @param tcp_est - TCP established timeout (default 7440sec)
+ @param tcp_incoming_syn - TCP incoming SYN timeout (default 6sec)
+*/
+autoreply define nat64_set_timeouts {
+ u32 client_index;
+ u32 context;
+ u32 udp;
+ u32 icmp;
+ u32 tcp_trans;
+ u32 tcp_est;
+ u32 tcp_incoming_syn;
+};
+
+/** \brief Get values of timeouts for NAT64 (seconds)
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define nat64_get_timeouts {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Get values of timeouts for NAT64 reply
+ @param context - sender context, to match reply w/ request
+ @param retval - return code
+ @param udp - UDP timeout
+ @param icmp - ICMP timeout
+ @param tcp_trans - TCP transitory timeout
+ @param tcp_est - TCP established timeout
+ @param tcp_incoming_syn - TCP incoming SYN timeout
+*/
+define nat64_get_timeouts_reply {
+ u32 context;
+ i32 retval;
+ u32 udp;
+ u32 icmp;
+ u32 tcp_trans;
+ u32 tcp_est;
+ u32 tcp_incoming_syn;
+};
+
+/** \brief Dump NAT64 session table
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param proto - protocol of the session table
+*/
+define nat64_st_dump {
+ u32 client_index;
+ u32 context;
+ u8 proto;
+};
+
+/** \brief NAT64 session table details response
+ @param context - sender context, to match reply w/ request
+ @param il_addr - inside IPv6 address of the local host
+ @param ol_addr - outside IPv4 address of the local host
+ @param il_port - inside port number id of the local host/inside ICMP id
+ @param ol_port - outside port number of the local host/outside ICMP id
+ @param il_addr - inside IPv6 address of the remote host
+ @param ol_addr - outside IPv4 address of the remote host
+ @param l_port - port number of the remote host (not used for ICMP)
+ @param vrf_id - VRF id of tenant
+ @param proto - protocol number
+*/
+define nat64_st_details {
+ u32 context;
+ u8 il_addr[16];
+ u8 ol_addr[4];
+ u16 il_port;
+ u16 ol_port;
+ u8 ir_addr[16];
+ u8 or_addr[4];
+ u16 r_port;
+ u32 vrf_id;
+ u8 proto;
+};
+
+/** \brief Add/del NAT64 prefix
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param prefix - NAT64 prefix
+ @param prefix - NAT64 prefix length
+ @param vrf_id - VRF id of tenant
+ @param is_add - 1 if add, 0 if delete
+*/
+autoreply define nat64_add_del_prefix {
+ u32 client_index;
+ u32 context;
+ u8 prefix[16];
+ u8 prefix_len;
+ u32 vrf_id;
+ u8 is_add;
+};
+
+/** \brief Dump NAT64 prefix
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define nat64_prefix_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Dump NAT64 prefix details response
+ @param context - sender context, to match reply w/ request
+ @param prefix - NAT64 prefix
+ @param prefix - NAT64 prefix length
+ @param vrf_id - VRF id of tenant
+*/
+define nat64_prefix_details {
+ u32 context;
+ u8 prefix[16];
+ u8 prefix_len;
+ u32 vrf_id;
+};
Code Review / vpp.git / blobdiff