* limitations under the License.
*/
-/** \brief Configure BFD feature
+option version = "1.0.0";
+
+/** \brief Set BFD echo source
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param slow_timer - slow timer (seconds)
- @param min_tx - desired min tx interval
- @param min_rx - desired min rx interval
- @param detect_mult - desired detection multiplier
+ @param sw_if_index - interface to use as echo source
*/
-define bfd_set_config {
+autoreply define bfd_udp_set_echo_source
+{
u32 client_index;
u32 context;
- u32 slow_timer;
- u32 min_tx;
- u32 min_rx;
- u8 detect_mult;
+ u32 sw_if_index;
};
-/** \brief Configure BFD feature response
+/** \brief Delete BFD echo source
+ @param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param retval - return code for the request
*/
-define bfd_set_config_reply {
+autoreply define bfd_udp_del_echo_source
+{
+ u32 client_index;
u32 context;
- i32 retval;
};
-/** \brief Get BFD configuration
+/** \brief Get BFD echo source
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
*/
-define bfd_get_config {
+define bfd_udp_get_echo_source
+{
u32 client_index;
u32 context;
};
-/** \brief Get BFD configuration response
+/** \brief Get BFD echo source reply
@param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param slow_timer - slow timer (seconds)
- @param min_tx - desired min tx interval
- @param min_rx - desired min rx interval
- @param detect_mult - desired detection multiplier
+ @param retval - return code
+ @param sw_if_index - interface to use as echo source
+ @param is_set - non-zero if set
+ @param have_usable_ip4 - non-zero if have usable IPv4 address
+ @param ip4_addr - IPv4 address
+ @param have_usable_ip6 - non-zero if have usable IPv6 address
+ @param ip6_addr - IPv6 address
*/
-define bfd_get_config_reply {
- u32 client_index;
+define bfd_udp_get_echo_source_reply
+{
u32 context;
- u32 slow_timer;
- u32 min_tx;
- u32 min_rx;
- u8 detect_mult;
+ i32 retval;
+ u32 sw_if_index;
+ u8 is_set;
+ u8 have_usable_ip4;
+ u8 ip4_addr[4];
+ u8 have_usable_ip6;
+ u8 ip6_addr[16];
};
/** \brief Add UDP BFD session on interface
@param sw_if_index - sw index of the interface
@param desired_min_tx - desired min transmit interval (microseconds)
@param required_min_rx - required min receive interval (microseconds)
- @param detect_mult - detect multiplier (# of packets missed between connection goes down)
@param local_addr - local address
@param peer_addr - peer address
@param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
+ @param detect_mult - detect multiplier (# of packets missed before connection goes down)
+ @param is_authenticated - non-zero if authentication is required
+ @param bfd_key_id - key id sent out in BFD packets (if is_authenticated)
+ @param conf_key_id - id of already configured key (if is_authenticated)
*/
-define bfd_udp_add {
+autoreply define bfd_udp_add
+{
u32 client_index;
u32 context;
u32 sw_if_index;
u8 peer_addr[16];
u8 is_ipv6;
u8 detect_mult;
+ u8 is_authenticated;
+ u8 bfd_key_id;
+ u32 conf_key_id;
};
-/** \brief Add UDP BFD session response
+/** \brief Modify UDP BFD session on interface
+ @param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param bs_index - index of the session created
+ @param sw_if_index - sw index of the interface
+ @param desired_min_tx - desired min transmit interval (microseconds)
+ @param required_min_rx - required min receive interval (microseconds)
+ @param local_addr - local address
+ @param peer_addr - peer address
+ @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
+ @param detect_mult - detect multiplier (# of packets missed before connection goes down)
*/
-define bfd_udp_add_reply {
+autoreply define bfd_udp_mod
+{
+ u32 client_index;
u32 context;
- i32 retval;
- u32 bs_index;
+ u32 sw_if_index;
+ u32 desired_min_tx;
+ u32 required_min_rx;
+ u8 local_addr[16];
+ u8 peer_addr[16];
+ u8 is_ipv6;
+ u8 detect_mult;
};
/** \brief Delete UDP BFD session on interface
@param peer_addr - peer address
@param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
*/
-define bfd_udp_del {
+autoreply define bfd_udp_del
+{
u32 client_index;
u32 context;
u32 sw_if_index;
u8 is_ipv6;
};
-/** \brief Delete UDP BFD session response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
-*/
-define bfd_udp_del_reply {
- u32 context;
- i32 retval;
-};
-
/** \brief Get all BFD sessions
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
-define bfd_udp_session_dump {
+define bfd_udp_session_dump
+{
u32 client_index;
u32 context;
};
/** \brief BFD session details structure
@param context - sender context, to match reply w/ request
- @param bs_index - index of the session
@param sw_if_index - sw index of the interface
@param local_addr - local address
@param peer_addr - peer address
@param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
@param state - session state
+ @param is_authenticated - non-zero if authentication in-use, zero otherwise
+ @param bfd_key_id - ID of key currently in-use if auth is on
+ @param conf_key_id - configured key ID for this session
+ @param required_min_rx - required min receive interval (microseconds)
+ @param desired_min_tx - desired min transmit interval (microseconds)
+ @param detect_mult - detect multiplier (# of packets missed before connection goes down)
*/
-define bfd_udp_session_details {
+define bfd_udp_session_details
+{
u32 context;
- u32 bs_index;
u32 sw_if_index;
u8 local_addr[16];
u8 peer_addr[16];
u8 is_ipv6;
u8 state;
+ u8 is_authenticated;
+ u8 bfd_key_id;
+ u32 conf_key_id;
+ u32 required_min_rx;
+ u32 desired_min_tx;
+ u8 detect_mult;
};
-/** \brief Set flags of BFD session
+/** \brief Set flags of BFD UDP session
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param bs_index - index of the bfd session to set flags on
+ @param sw_if_index - sw index of the interface
+ @param local_addr - local address
+ @param peer_addr - peer address
+ @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
@param admin_up_down - set the admin state, 1 = up, 0 = down
*/
-define bfd_session_set_flags {
+autoreply define bfd_udp_session_set_flags
+{
u32 client_index;
u32 context;
- u32 bs_index;
+ u32 sw_if_index;
+ u8 local_addr[16];
+ u8 peer_addr[16];
+ u8 is_ipv6;
u8 admin_up_down;
};
-/** \brief Reply to bfd_session_set_flags
- @param context - sender context which was passed in the request
- @param retval - return code of the set flags request
-*/
-define bfd_session_set_flags_reply
-{
- u32 context;
- i32 retval;
-};
-
/** \brief Register for BFD events
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable - 1 => register for events, 0 => cancel registration
@param pid - sender's pid
*/
-define want_bfd_events
+autoreply define want_bfd_events
{
u32 client_index;
u32 context;
u32 pid;
};
-/** \brief Reply for BFD events registration
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
+/** \brief BFD UDP - add/replace key to configuration
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param conf_key_id - key ID to add/replace/delete
+ @param key_len - length of key (must be non-zero)
+ @param auth_type - authentication type (RFC 5880/4.1/Auth Type)
+ @param key - key data
*/
-define want_bfd_events_reply
+autoreply define bfd_auth_set_key
{
+ u32 client_index;
u32 context;
- i32 retval;
+ u32 conf_key_id;
+ u8 key_len;
+ u8 auth_type;
+ u8 key[20];
+};
+
+/** \brief BFD UDP - delete key from configuration
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param conf_key_id - key ID to add/replace/delete
+ @param key_len - length of key (must be non-zero)
+ @param key - key data
+*/
+autoreply define bfd_auth_del_key
+{
+ u32 client_index;
+ u32 context;
+ u32 conf_key_id;
+};
+
+/** \brief Get a list of configured authentication keys
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define bfd_auth_keys_dump
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief BFD authentication key details
+ @param context - sender context, to match reply w/ request
+ @param conf_key_id - configured key ID
+ @param use_count - how many BFD sessions currently use this key
+ @param auth_type - authentication type (RFC 5880/4.1/Auth Type)
+*/
+define bfd_auth_keys_details
+{
+ u32 context;
+ u32 conf_key_id;
+ u32 use_count;
+ u8 auth_type;
+};
+
+/** \brief BFD UDP - activate/change authentication
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - sw index of the interface
+ @param local_addr - local address
+ @param peer_addr - peer address
+ @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
+ @param is_delayed - change is applied once peer applies the change (on first received packet with this auth)
+ @param bfd_key_id - key id sent out in BFD packets
+ @param conf_key_id - id of already configured key
+*/
+autoreply define bfd_udp_auth_activate
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 local_addr[16];
+ u8 peer_addr[16];
+ u8 is_ipv6;
+ u8 is_delayed;
+ u8 bfd_key_id;
+ u32 conf_key_id;
+};
+
+/** \brief BFD UDP - deactivate authentication
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - sw index of the interface
+ @param local_addr - local address
+ @param peer_addr - peer address
+ @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
+ @param is_delayed - change is applied once peer applies the change (on first received non-authenticated packet)
+*/
+autoreply define bfd_udp_auth_deactivate
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 local_addr[16];
+ u8 peer_addr[16];
+ u8 is_ipv6;
+ u8 is_delayed;
};
/*