fib_prefix_t *prefixs = NULL, pfx;
mpls_label_t out_label, via_label;
clib_error_t *error = NULL;
+ u32 weight, preference;
u32 table_id, is_del;
vnet_main_t *vnm;
u32 fib_index;
if (unformat (line_input, "table %d", &table_id))
;
- else if (unformat (line_input, "del"))
- is_del = 1;
- else if (unformat (line_input, "add"))
- is_del = 0;
else if (unformat (line_input, "resolve-via-host"))
{
if (vec_len (rpaths) == 0)
rpaths[vec_len (rpaths) - 1].frp_flags |=
FIB_ROUTE_PATH_RESOLVE_VIA_ATTACHED;
}
- else if (unformat (line_input, "out-label %U",
- unformat_mpls_unicast_label, &out_label))
+ else if (unformat (line_input, "out-labels"))
{
if (vec_len (rpaths) == 0)
{
error = clib_error_return (0, "Paths then labels");
goto done;
}
- vec_add1 (rpaths[vec_len (rpaths) - 1].frp_label_stack, out_label);
+ else
+ {
+ while (unformat (line_input, "%U",
+ unformat_mpls_unicast_label, &out_label))
+ {
+ vec_add1 (rpaths[vec_len (rpaths) - 1].frp_label_stack,
+ out_label);
+ }
+ }
}
else if (unformat (line_input, "via-label %U",
unformat_mpls_unicast_label, &rpath.frp_local_label))
{
rpath.frp_weight = 1;
rpath.frp_eos = MPLS_NON_EOS;
- rpath.frp_proto = FIB_PROTOCOL_MPLS;
+ rpath.frp_proto = DPO_PROTO_MPLS;
rpath.frp_sw_if_index = ~0;
vec_add1 (rpaths, rpath);
}
pfx.fp_proto = FIB_PROTOCOL_IP6;
vec_add1 (prefixs, pfx);
}
- else if (unformat (line_input, "via %U %U weight %u",
- unformat_ip4_address,
- &rpath.frp_addr.ip4,
- unformat_vnet_sw_interface, vnm,
- &rpath.frp_sw_if_index, &rpath.frp_weight))
- {
- rpath.frp_proto = FIB_PROTOCOL_IP4;
- vec_add1 (rpaths, rpath);
- }
-
- else if (unformat (line_input, "via %U %U weight %u",
- unformat_ip6_address,
- &rpath.frp_addr.ip6,
- unformat_vnet_sw_interface, vnm,
- &rpath.frp_sw_if_index, &rpath.frp_weight))
- {
- rpath.frp_proto = FIB_PROTOCOL_IP6;
- vec_add1 (rpaths, rpath);
- }
-
else if (unformat (line_input, "via %U %U",
unformat_ip4_address,
&rpath.frp_addr.ip4,
&rpath.frp_sw_if_index))
{
rpath.frp_weight = 1;
- rpath.frp_proto = FIB_PROTOCOL_IP4;
+ rpath.frp_proto = DPO_PROTO_IP4;
vec_add1 (rpaths, rpath);
}
&rpath.frp_sw_if_index))
{
rpath.frp_weight = 1;
- rpath.frp_proto = FIB_PROTOCOL_IP6;
+ rpath.frp_proto = DPO_PROTO_IP6;
vec_add1 (rpaths, rpath);
}
+ else if (unformat (line_input, "weight %u", &weight))
+ {
+ ASSERT (vec_len (rpaths));
+ rpaths[vec_len (rpaths) - 1].frp_weight = weight;
+ }
+ else if (unformat (line_input, "preference %u", &preference))
+ {
+ ASSERT (vec_len (rpaths));
+ rpaths[vec_len (rpaths) - 1].frp_preference = preference;
+ }
else if (unformat (line_input, "via %U next-hop-table %d",
unformat_ip4_address,
&rpath.frp_addr.ip4, &rpath.frp_fib_index))
{
rpath.frp_weight = 1;
rpath.frp_sw_if_index = ~0;
- rpath.frp_proto = FIB_PROTOCOL_IP4;
+ rpath.frp_proto = DPO_PROTO_IP4;
vec_add1 (rpaths, rpath);
}
else if (unformat (line_input, "via %U next-hop-table %d",
{
rpath.frp_weight = 1;
rpath.frp_sw_if_index = ~0;
- rpath.frp_proto = FIB_PROTOCOL_IP6;
+ rpath.frp_proto = DPO_PROTO_IP6;
vec_add1 (rpaths, rpath);
}
else if (unformat (line_input, "via %U",
rpath.frp_fib_index = table_id;
rpath.frp_weight = 1;
rpath.frp_sw_if_index = ~0;
- rpath.frp_proto = FIB_PROTOCOL_IP4;
+ rpath.frp_proto = DPO_PROTO_IP4;
vec_add1 (rpaths, rpath);
}
else if (unformat (line_input, "via %U",
rpath.frp_fib_index = table_id;
rpath.frp_weight = 1;
rpath.frp_sw_if_index = ~0;
- rpath.frp_proto = FIB_PROTOCOL_IP6;
+ rpath.frp_proto = DPO_PROTO_IP6;
vec_add1 (rpaths, rpath);
}
else if (unformat (line_input,
"lookup in table %d", &rpath.frp_fib_index))
{
- rpath.frp_proto = pfx.fp_proto;
+ rpath.frp_proto = fib_proto_to_dpo (pfx.fp_proto);
rpath.frp_sw_if_index = ~0;
vec_add1 (rpaths, rpath);
}
&rpath.frp_sw_if_index))
{
rpath.frp_weight = 1;
- rpath.frp_proto = prefixs[0].fp_proto;
+ rpath.frp_proto = fib_proto_to_dpo (prefixs[0].fp_proto);
vec_add1 (rpaths, rpath);
}
else if (vec_len (prefixs) > 0 &&
{
vec_add1 (dpos, dpo);
}
+ else if (unformat (line_input, "del"))
+ is_del = 1;
+ else if (unformat (line_input, "add"))
+ is_del = 0;
else
{
error = unformat_parse_error (line_input);
return error;
}
+clib_error_t *
+vnet_ip_table_cmd (vlib_main_t * vm,
+ unformat_input_t * main_input,
+ vlib_cli_command_t * cmd, fib_protocol_t fproto)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ clib_error_t *error = NULL;
+ u32 table_id, is_add;
+
+ is_add = 1;
+ table_id = ~0;
+
+ /* Get a line of input. */
+ if (!unformat_user (main_input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat (line_input, "%d", &table_id))
+ ;
+ else if (unformat (line_input, "del"))
+ is_add = 0;
+ else if (unformat (line_input, "add"))
+ is_add = 1;
+ else
+ {
+ error = unformat_parse_error (line_input);
+ goto done;
+ }
+ }
+
+ if (~0 == table_id)
+ {
+ error = clib_error_return (0, "No table id");
+ goto done;
+ }
+ else if (0 == table_id)
+ {
+ error = clib_error_return (0, "Can't change the default table");
+ goto done;
+ }
+ else
+ {
+ if (is_add)
+ {
+ ip_table_create (fproto, table_id, 0);
+ }
+ else
+ {
+ ip_table_delete (fproto, table_id, 0);
+ }
+ }
+
+done:
+ unformat_free (line_input);
+ return error;
+}
+
+clib_error_t *
+vnet_ip4_table_cmd (vlib_main_t * vm,
+ unformat_input_t * main_input, vlib_cli_command_t * cmd)
+{
+ return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4));
+}
+
+clib_error_t *
+vnet_ip6_table_cmd (vlib_main_t * vm,
+ unformat_input_t * main_input, vlib_cli_command_t * cmd)
+{
+ return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6));
+}
+
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (vlib_cli_ip_command, static) = {
.path = "ip",
.function = vnet_ip_route_cmd,
.is_mp_safe = 1,
};
+
+/* *INDENT-ON* */
+/*?
+ * This command is used to add or delete IPv4 Tables. All
+ * Tables must be explicitly added before that can be used. Creating a
+ * table will add both unicast and multicast FIBs
+ *
+ ?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (ip4_table_command, static) = {
+ .path = "ip table",
+ .short_help = "ip table [add|del] <table-id>",
+ .function = vnet_ip4_table_cmd,
+ .is_mp_safe = 1,
+};
+/* *INDENT-ON* */
+
+/* *INDENT-ON* */
+/*?
+ * This command is used to add or delete IPv4 Tables. All
+ * Tables must be explicitly added before that can be used. Creating a
+ * table will add both unicast and multicast FIBs
+ *
+ ?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (ip6_table_command, static) = {
+ .path = "ip6 table",
+ .short_help = "ip6 table [add|del] <table-id>",
+ .function = vnet_ip6_table_cmd,
+ .is_mp_safe = 1,
+};
+
+static clib_error_t *
+ip_table_bind_cmd (vlib_main_t * vm,
+ unformat_input_t * input,
+ vlib_cli_command_t * cmd,
+ fib_protocol_t fproto)
+{
+ vnet_main_t *vnm = vnet_get_main ();
+ clib_error_t *error = 0;
+ u32 sw_if_index, table_id;
+ int rv;
+
+ sw_if_index = ~0;
+
+ if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
+ {
+ error = clib_error_return (0, "unknown interface `%U'",
+ format_unformat_error, input);
+ goto done;
+ }
+
+ if (unformat (input, "%d", &table_id))
+ ;
+ else
+ {
+ error = clib_error_return (0, "expected table id `%U'",
+ format_unformat_error, input);
+ goto done;
+ }
+
+ rv = ip_table_bind (fproto, sw_if_index, table_id, 0);
+
+ if (VNET_API_ERROR_ADDRESS_FOUND_FOR_INTERFACE == rv)
+ {
+ error = clib_error_return (0, "IP addresses are still present on %U",
+ format_vnet_sw_if_index_name,
+ vnet_get_main(),
+ sw_if_index);
+ }
+ else if (VNET_API_ERROR_NO_SUCH_FIB == rv)
+ {
+ error = clib_error_return (0, "no such table %d", table_id);
+ }
+ else if (0 != rv)
+ {
+ error = clib_error_return (0, "unknown error");
+ }
+
+ done:
+ return error;
+}
+
+static clib_error_t *
+ip4_table_bind_cmd (vlib_main_t * vm,
+ unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP4));
+}
+
+static clib_error_t *
+ip6_table_bind_cmd (vlib_main_t * vm,
+ unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP6));
+}
+
+/*?
+ * Place the indicated interface into the supplied IPv4 FIB table (also known
+ * as a VRF). If the FIB table does not exist, this command creates it. To
+ * display the current IPv4 FIB table, use the command '<em>show ip fib</em>'.
+ * FIB table will only be displayed if a route has been added to the table, or
+ * an IP Address is assigned to an interface in the table (which adds a route
+ * automatically).
+ *
+ * @note IP addresses added after setting the interface IP table are added to
+ * the indicated FIB table. If an IP address is added prior to changing the
+ * table then this is an error. The control plane must remove these addresses
+ * first and then change the table. VPP will not automatically move the
+ * addresses from the old to the new table as it does not know the validity
+ * of such a change.
+ *
+ * @cliexpar
+ * Example of how to add an interface to an IPv4 FIB table (where 2 is the table-id):
+ * @cliexcmd{set interface ip table GigabitEthernet2/0/0 2}
+ ?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (set_interface_ip_table_command, static) =
+{
+ .path = "set interface ip table",
+ .function = ip4_table_bind_cmd,
+ .short_help = "set interface ip table <interface> <table-id>",
+};
+/* *INDENT-ON* */
+
+/*?
+ * Place the indicated interface into the supplied IPv6 FIB table (also known
+ * as a VRF). If the FIB table does not exist, this command creates it. To
+ * display the current IPv6 FIB table, use the command '<em>show ip6 fib</em>'.
+ * FIB table will only be displayed if a route has been added to the table, or
+ * an IP Address is assigned to an interface in the table (which adds a route
+ * automatically).
+ *
+ * @note IP addresses added after setting the interface IP table are added to
+ * the indicated FIB table. If an IP address is added prior to changing the
+ * table then this is an error. The control plane must remove these addresses
+ * first and then change the table. VPP will not automatically move the
+ * addresses from the old to the new table as it does not know the validity
+ * of such a change.
+ *
+ * @cliexpar
+ * Example of how to add an interface to an IPv6 FIB table (where 2 is the table-id):
+ * @cliexcmd{set interface ip6 table GigabitEthernet2/0/0 2}
+ ?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (set_interface_ip6_table_command, static) =
+{
+ .path = "set interface ip6 table",
+ .function = ip6_table_bind_cmd,
+ .short_help = "set interface ip6 table <interface> <table-id>"
+};
/* *INDENT-ON* */
clib_error_t *
unformat_ip4_address,
&pfx.fp_grp_addr.ip4, &pfx.fp_len))
{
+ memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
pfx.fp_proto = FIB_PROTOCOL_IP4;
}
else if (unformat (line_input, "%U/%d",
unformat_ip6_address,
&pfx.fp_grp_addr.ip6, &pfx.fp_len))
{
+ memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
pfx.fp_proto = FIB_PROTOCOL_IP6;
}
else if (unformat (line_input, "%U",
Code Review / vpp.git / blobdiff