* limitations under the License.
*/
-option version = "3.0.2";
+option version = "5.0.2";
import "vnet/ipsec/ipsec_types.api";
import "vnet/interface_types.api";
import "vnet/ip/ip_types.api";
import "vnet/interface_types.api";
+import "vnet/tunnel/tunnel_types.api";
/** \brief IPsec: Add/delete Security Policy Database
@param client_index - opaque cookie to identify the sender
u32 spd_id;
};
+/** \brief IPsec: Add/delete Security Policy Database entry
-enum ipsec_spd_action
-{
- /* bypass - no IPsec processing */
- IPSEC_API_SPD_ACTION_BYPASS = 0,
- /* discard - discard packet with ICMP processing */
- IPSEC_API_SPD_ACTION_DISCARD,
- /* resolve - send request to control plane for SA resolving */
- IPSEC_API_SPD_ACTION_RESOLVE,
- /* protect - apply IPsec policy using following parameters */
- IPSEC_API_SPD_ACTION_PROTECT,
-};
-
-/** \brief IPsec: Security Policy Database entry
-
- See RFC 4301, 4.4.1.1 on how to match packet to selectors
-
- @param spd_id - SPD instance id (control plane allocated)
- @param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower
- @param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic
- @param remote_address_start - start of remote address range to match
- @param remote_address_stop - end of remote address range to match
- @param local_address_start - start of local address range to match
- @param local_address_stop - end of local address range to match
- @param protocol - protocol type to match [0 means any] otherwise IANA value
- @param remote_port_start - start of remote port range to match ...
- @param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
- @param local_port_start - start of local port range to match ...
- @param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
- @param policy - action to perform on match
- @param sa_id - SAD instance id (control plane allocated)
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - add SPD if non-zero, else delete
+ @param entry - Description of the entry to add/dell
*/
-typedef ipsec_spd_entry
+define ipsec_spd_entry_add_del
{
- u32 spd_id;
- i32 priority;
- bool is_outbound;
-
- u32 sa_id;
- vl_api_ipsec_spd_action_t policy;
- /* Which protocol?? */
- u8 protocol;
-
- // Selector
- vl_api_address_t remote_address_start;
- vl_api_address_t remote_address_stop;
- vl_api_address_t local_address_start;
- vl_api_address_t local_address_stop;
-
- u16 remote_port_start;
- u16 remote_port_stop;
- u16 local_port_start;
- u16 local_port_stop;
+ option deprecated;
+ u32 client_index;
+ u32 context;
+ bool is_add;
+ vl_api_ipsec_spd_entry_t entry;
};
-/** \brief IPsec: Add/delete Security Policy Database entry
+/** \brief IPsec: Add/delete Security Policy Database entry v2
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add SPD if non-zero, else delete
@param entry - Description of the entry to add/dell
*/
-define ipsec_spd_entry_add_del
+define ipsec_spd_entry_add_del_v2
{
u32 client_index;
u32 context;
bool is_add;
- vl_api_ipsec_spd_entry_t entry;
+ vl_api_ipsec_spd_entry_v2_t entry;
};
/** \brief IPsec: Reply Add/delete Security Policy Database entry
u32 stat_index;
};
+/** \brief IPsec: Reply Add/delete Security Policy Database entry v2
+
+ @param context - sender context, to match reply w/ request
+ @param retval - success/fail rutrun code
+ @param stat_index - An index for the policy in the stats segment @ /net/ipec/policy
+*/
+define ipsec_spd_entry_add_del_v2_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stat_index;
+};
+
/** \brief Dump IPsec all SPD IDs
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define ipsec_sad_entry_add_del
{
+ option deprecated;
u32 client_index;
u32 context;
bool is_add;
vl_api_ipsec_sad_entry_t entry;
};
+
+define ipsec_sad_entry_add_del_v2
+{
+ u32 client_index;
+ u32 context;
+ bool is_add;
+ vl_api_ipsec_sad_entry_v2_t entry;
+};
+
+define ipsec_sad_entry_add_del_v3
+{
+ u32 client_index;
+ u32 context;
+ bool is_add;
+ vl_api_ipsec_sad_entry_v3_t entry;
+};
+define ipsec_sad_entry_add
+{
+ u32 client_index;
+ u32 context;
+ vl_api_ipsec_sad_entry_v3_t entry;
+};
+autoreply define ipsec_sad_entry_del
+{
+ u32 client_index;
+ u32 context;
+ u32 id;
+};
+
define ipsec_sad_entry_add_del_reply
+{
+ option deprecated;
+ u32 context;
+ i32 retval;
+ u32 stat_index;
+};
+
+define ipsec_sad_entry_add_del_v2_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stat_index;
+};
+
+define ipsec_sad_entry_add_del_v3_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stat_index;
+};
+define ipsec_sad_entry_add_reply
{
u32 context;
i32 retval;
vl_api_interface_index_t sw_if_index;
};
-/** \brief Add or delete IPsec tunnel interface
-
- !!DEPRECATED!!
- use the tunnel protect APIs instead
+typedef ipsec_itf
+{
+ u32 user_instance [default=0xffffffff];
+ vl_api_tunnel_mode_t mode;
+ vl_api_interface_index_t sw_if_index;
+};
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add IPsec tunnel interface if nonzero, else delete
- @param is_ip6 - tunnel v6 or v4
- @param esn - enable extended sequence numbers if nonzero, else disable
- @param anti_replay - enable anti replay check if nonzero, else disable
- @param local_ip - local IP address
- @param remote_ip - IP address of remote IPsec peer
- @param local_spi - SPI of outbound IPsec SA
- @param remote_spi - SPI of inbound IPsec SA
- @param crypto_alg - encryption algorithm ID
- @param local_crypto_key_len - length of local crypto key in bytes
- @param local_crypto_key - crypto key for outbound IPsec SA
- @param remote_crypto_key_len - length of remote crypto key in bytes
- @param remote_crypto_key - crypto key for inbound IPsec SA
- @param integ_alg - integrity algorithm ID
- @param local_integ_key_len - length of local integrity key in bytes
- @param local_integ_key - integrity key for outbound IPsec SA
- @param remote_integ_key_len - length of remote integrity key in bytes
- @param remote_integ_key - integrity key for inbound IPsec SA
- @param renumber - intf display name uses a specified instance if != 0
- @param show_instance - instance to display for intf if renumber is set
- @param udp_encap - enable UDP encapsulation for NAT traversal
- @param tx_table_id - the FIB id used after packet encap
- @param salt - for use with counter mode ciphers
-*/
-define ipsec_tunnel_if_add_del {
+/** \brief Create an IPSec interface
+ */
+define ipsec_itf_create {
u32 client_index;
u32 context;
- bool is_add;
- bool esn;
- bool anti_replay;
- vl_api_address_t local_ip;
- vl_api_address_t remote_ip;
- u32 local_spi;
- u32 remote_spi;
- u8 crypto_alg;
- u8 local_crypto_key_len;
- u8 local_crypto_key[128];
- u8 remote_crypto_key_len;
- u8 remote_crypto_key[128];
- u8 integ_alg;
- u8 local_integ_key_len;
- u8 local_integ_key[128];
- u8 remote_integ_key_len;
- u8 remote_integ_key[128];
- bool renumber;
- u32 show_instance;
- bool udp_encap;
- u32 tx_table_id;
- u32 salt;
+ vl_api_ipsec_itf_t itf;
};
-/** \brief Add/delete IPsec tunnel interface response
+/** \brief Add IPsec interface interface response
@param context - sender context, to match reply w/ request
@param retval - return status
@param sw_if_index - sw_if_index of new interface (for successful add)
*/
-define ipsec_tunnel_if_add_del_reply {
+define ipsec_itf_create_reply
+{
u32 context;
i32 retval;
vl_api_interface_index_t sw_if_index;
};
+autoreply define ipsec_itf_delete
+{
+ u32 client_index;
+ u32 context;
+ vl_api_interface_index_t sw_if_index;
+};
+
+define ipsec_itf_dump
+{
+ u32 client_index;
+ u32 context;
+ vl_api_interface_index_t sw_if_index;
+};
+
+define ipsec_itf_details
+{
+ u32 context;
+ vl_api_ipsec_itf_t itf;
+};
+
/** \brief Dump IPsec security association
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sa_id - optional ID of an SA to dump, if ~0 dump all SAs in SAD
*/
-define ipsec_sa_dump {
+define ipsec_sa_dump
+{
+ option deprecated;
+ u32 client_index;
+ u32 context;
+ u32 sa_id;
+};
+define ipsec_sa_v2_dump
+{
+ u32 client_index;
+ u32 context;
+ u32 sa_id;
+};
+define ipsec_sa_v3_dump
+{
u32 client_index;
u32 context;
u32 sa_id;
/** \brief IPsec security association database response
@param context - sender context which was passed in the request
- @param sa_id - SA ID, policy-based SAs >=0, tunnel interface SAs = 0
+ @param entry - The SA details
@param sw_if_index - sw_if_index of tunnel interface, policy-based SAs = ~0
- @param spi - security parameter index
- @param protocol - IPsec protocol (value from ipsec_protocol_t)
- @param crypto_alg - crypto algorithm (value from ipsec_crypto_alg_t)
- @param crypto_key_len - length of crypto_key in bytes
- @param crypto_key - crypto keying material
- @param integ_alg - integrity algorithm (value from ipsec_integ_alg_t)
- @param integ_key_len - length of integ_key in bytes
- @param integ_key - integrity keying material
- @param use_esn - using extended sequence numbers when non-zero
- @param use_anti_replay - using anti-replay window when non-zero
- @param is_tunnel - IPsec tunnel mode when non-zero, else transport mode
- @param is_tunnel_ipv6 - If using tunnel mode, endpoints are IPv6
- @param tunnel_src_addr - Tunnel source address if using tunnel mode
- @param tunnel_dst_addr - Tunnel destination address is using tunnel mode
@param salt - 4 byte salt
@param seq - current sequence number for outbound
@param seq_hi - high 32 bits of ESN for outbound
@param last_seq_hi - high 32 bits of highest ESN received inbound
@param replay_window - bit map of seq nums received relative to last_seq if using anti-replay
@param stat_index - index for the SA in the stats segment @ /net/ipsec/sa
- @param udp_encap - 1 if UDP encap enabled, 0 otherwise
*/
define ipsec_sa_details {
+ option deprecated;
u32 context;
vl_api_ipsec_sad_entry_t entry;
u32 stat_index;
};
+define ipsec_sa_v2_details {
+ u32 context;
+ vl_api_ipsec_sad_entry_v2_t entry;
-/** \brief Set new SA on IPsec interface
-
- !! DEPRECATED !!
+ vl_api_interface_index_t sw_if_index;
+ u32 salt;
+ u64 seq_outbound;
+ u64 last_seq_inbound;
+ u64 replay_window;
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - index of tunnel interface
- @param sa_id - ID of SA to use
- @param is_outbound - 1 if outbound (local) SA, 0 if inbound (remote)
-*/
-autoreply define ipsec_tunnel_if_set_sa {
- u32 client_index;
+ u32 stat_index;
+};
+define ipsec_sa_v3_details {
u32 context;
+ vl_api_ipsec_sad_entry_v3_t entry;
+
vl_api_interface_index_t sw_if_index;
- u32 sa_id;
- u8 is_outbound;
+ u64 seq_outbound;
+ u64 last_seq_inbound;
+ u64 replay_window;
+
+ u32 stat_index;
};
/** \brief Dump IPsec backends
u8 index;
};
+
+/** \brief IPsec Set Async mode
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param async_enable - ipsec async mode on or off
+*/
+autoreply define ipsec_set_async_mode {
+ u32 client_index;
+ u32 context;
+ bool async_enable;
+};
+
/*
* Local Variables:
* eval: (c-set-style "gnu")
Code Review / vpp.git / blobdiff