* limitations under the License.
*/
-vl_api_version 1.0.0
+option version = "2.1.0";
/** \brief IPsec: Add/delete Security Policy Database
@param client_index - opaque cookie to identify the sender
@param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero
@param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
@param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
+ @param udp_encap - enable UDP encapsulation for NAT traversal
To be added:
Anti-replay
u8 is_tunnel_ipv6;
u8 tunnel_src_address[16];
u8 tunnel_dst_address[16];
+ u8 udp_encap;
};
/** \brief IPsec: Update Security Association keys
u8 auth_method;
u8 is_hex;
u32 data_len;
- u8 data[0];
+ u8 data[data_len];
};
/** \brief IKEv2: Set IKEv2 profile local/remote identification
u8 is_local;
u8 id_type;
u32 data_len;
- u8 data[0];
+ u8 data[data_len];
};
/** \brief IKEv2: Set IKEv2 profile traffic selector parameters
@param name - IKEv2 profile name
@param lifetime - SA maximum life time in seconds (0 to disable)
- @param lifetime_jitter - Jitter added to prevent simultaneounus rekeying
+ @param lifetime_jitter - Jitter added to prevent simultaneous rekeying
@param handover - Hand over time
@param lifetime_maxdata - SA maximum life time in bytes (0 to disable)
u32 ispi;
};
+/** \brief Dump IPsec all SPD IDs
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define ipsec_spds_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Dump IPsec all SPD IDs response
+ @param client_index - opaque cookie to identify the sender
+ @param spd_id - SPD instance id (control plane allocated)
+ @param npolicies - number of policies in SPD
+*/
+define ipsec_spds_details {
+ u32 context;
+ u32 spd_id;
+ u32 npolicies;
+};
+
/** \brief Dump ipsec policy database data
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u64 packets;
};
+/** \brief IPsec: Get SPD interfaces
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param spd_index - SPD index
+ @param spd_index_valid - if 1 spd_index is used to filter
+ spd_index's, if 0 no filtering is done
+*/
+define ipsec_spd_interface_dump {
+ u32 client_index;
+ u32 context;
+ u32 spd_index;
+ u8 spd_index_valid;
+};
+
+/** \brief IPsec: SPD interface response
+ @param context - sender context which was passed in the request
+ @param spd_index - SPD index
+ @param sw_if_index - index of the interface
+*/
+define ipsec_spd_interface_details {
+ u32 context;
+ u32 spd_index;
+ u32 sw_if_index;
+};
+
/** \brief Add or delete IPsec tunnel interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param local_integ_key - integrity key for outbound IPsec SA
@param remote_integ_key_len - length of remote integrity key in bytes
@param remote_integ_key - integrity key for inbound IPsec SA
+ @param renumber - intf display name uses a specified instance if != 0
+ @param show_instance - instance to display for intf if renumber is set
+ @param udp_encap - enable UDP encapsulation for NAT traversal
+ @param tx_table_id - the FIB id used after packet encap
*/
define ipsec_tunnel_if_add_del {
u32 client_index;
u8 local_integ_key[128];
u8 remote_integ_key_len;
u8 remote_integ_key[128];
+ u8 renumber;
+ u32 show_instance;
+ u8 udp_encap;
+ u32 tx_table_id;
};
/** \brief Add/delete IPsec tunnel interface response
@param last_seq_hi - high 32 bits of highest ESN received inbound
@param replay_window - bit map of seq nums received relative to last_seq if using anti-replay
@param total_data_size - total bytes sent or received
+ @param udp_encap - 1 if UDP encap enabled, 0 otherwise
+ @param tx_table_id - the FIB id used for encapsulated packets
*/
define ipsec_sa_details {
u32 context;
u64 replay_window;
u64 total_data_size;
+ u8 udp_encap;
+
+ u32 tx_table_id;
};
/** \brief Set key on IPsec interface
u8 is_outbound;
};
+/** \brief Dump IPsec backends
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define ipsec_backend_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief IPsec backend details
+ @param name - name of the backend
+ @param protocol - IPsec protocol (value from ipsec_protocol_t)
+ @param index - backend index
+ @param active - set to 1 if the backend is active, otherwise 0
+*/
+define ipsec_backend_details {
+ u32 context;
+ u8 name[128];
+ u8 protocol;
+ u8 index;
+ u8 active;
+};
+
+/** \brief Select IPsec backend
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param protocol - IPsec protocol (value from ipsec_protocol_t)
+ @param index - backend index
+*/
+autoreply define ipsec_select_backend {
+ u32 client_index;
+ u32 context;
+ u8 protocol;
+ u8 index;
+};
+
/*
* Local Variables:
* eval: (c-set-style "gnu")