+/* Hey Emacs use -*- mode: C -*- */
/*
* Copyright (c) 2015-2016 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* limitations under the License.
*/
+option version = "3.0.0";
+
+import "vnet/ip/ip_types.api";
+
/** \brief IPsec: Add/delete Security Policy Database
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u32 spd_id;
};
-/** \brief IPsec: Add/delete Security Policy Database entry
+
+enum ipsec_spd_action
+{
+ /* bypass - no IPsec processing */
+ IPSEC_API_SPD_ACTION_BYPASS = 0,
+ /* discard - discard packet with ICMP processing */
+ IPSEC_API_SPD_ACTION_DISCARD,
+ /* resolve - send request to control plane for SA resolving */
+ IPSEC_API_SPD_ACTION_RESOLVE,
+ /* protect - apply IPsec policy using following parameters */
+ IPSEC_API_SPD_ACTION_PROTECT,
+};
+
+/** \brief IPsec: Security Policy Database entry
See RFC 4301, 4.4.1.1 on how to match packet to selectors
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add SPD if non-zero, else delete
@param spd_id - SPD instance id (control plane allocated)
@param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower
@param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic
- @param is_ipv6 - remote/local address are IPv6 if non-zero, else IPv4
@param remote_address_start - start of remote address range to match
@param remote_address_stop - end of remote address range to match
@param local_address_start - start of local address range to match
@param local_address_stop - end of local address range to match
- @param protocol - protocol type to match [0 means any]
+ @param protocol - protocol type to match [0 means any] otherwise IANA value
@param remote_port_start - start of remote port range to match ...
@param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
@param local_port_start - start of local port range to match ...
@param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
- @param policy - 0 = bypass (no IPsec processing), 1 = discard (discard packet with ICMP processing), 2 = resolve (send request to control plane for SA resolving, and discard without ICMP processing), 3 = protect (apply IPsec policy using following parameters)
+ @param policy - action to perform on match
@param sa_id - SAD instance id (control plane allocated)
-
*/
-
-autoreply define ipsec_spd_add_del_entry
+typedef ipsec_spd_entry
{
- u32 client_index;
- u32 context;
- u8 is_add;
-
u32 spd_id;
i32 priority;
u8 is_outbound;
- // Selector
- u8 is_ipv6;
- u8 is_ip_any;
- u8 remote_address_start[16];
- u8 remote_address_stop[16];
- u8 local_address_start[16];
- u8 local_address_stop[16];
-
+ u32 sa_id;
+ vl_api_ipsec_spd_action_t policy;
u8 protocol;
+ // Selector
+ vl_api_address_t remote_address_start;
+ vl_api_address_t remote_address_stop;
+ vl_api_address_t local_address_start;
+ vl_api_address_t local_address_stop;
+
u16 remote_port_start;
u16 remote_port_stop;
u16 local_port_start;
u16 local_port_stop;
-
- // Policy
- u8 policy;
- u32 sa_id;
};
-/** \brief IPsec: Add/delete Security Association Database entry
+/** \brief IPsec: Add/delete Security Policy Database entry
+
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param is_add - add SAD entry if non-zero, else delete
+ @param is_add - add SPD if non-zero, else delete
+ @param entry - Description of the entry to add/dell
+*/
+define ipsec_spd_entry_add_del
+{
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ vl_api_ipsec_spd_entry_t entry;
+};
- @param sad_id - sad id
+/** \brief IPsec: Reply Add/delete Security Policy Database entry
- @param spi - security parameter index
+ @param context - sender context, to match reply w/ request
+ @param retval - success/fail rutrun code
+ @param stat_index - An index for the policy in the stats segment @ /net/ipec/policy
+*/
+define ipsec_spd_entry_add_del_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stat_index;
+};
- @param protocol - 0 = AH, 1 = ESP
+/** \brief Dump IPsec all SPD IDs
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define ipsec_spds_dump {
+ u32 client_index;
+ u32 context;
+};
- @param crypto_algorithm - 0 = Null, 1 = AES-CBC-128, 2 = AES-CBC-192, 3 = AES-CBC-256, 4 = 3DES-CBC
- @param crypto_key_length - length of crypto_key in bytes
- @param crypto_key - crypto keying material
+/** \brief Dump IPsec all SPD IDs response
+ @param client_index - opaque cookie to identify the sender
+ @param spd_id - SPD instance id (control plane allocated)
+ @param npolicies - number of policies in SPD
+*/
+define ipsec_spds_details {
+ u32 context;
+ u32 spd_id;
+ u32 npolicies;
+};
- @param integrity_algorithm - 0 = None, 1 = MD5-96, 2 = SHA1-96, 3 = SHA-256, 4 = SHA-384, 5=SHA-512
- @param integrity_key_length - length of integrity_key in bytes
- @param integrity_key - integrity keying material
+/** \brief Dump ipsec policy database data
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param spd_id - SPD instance id
+ @param sa_id - SA id, optional, set to ~0 to see all policies in SPD
+*/
+define ipsec_spd_dump {
+ u32 client_index;
+ u32 context;
+ u32 spd_id;
+ u32 sa_id;
+};
- @param use_extended_sequence_number - use ESN when non-zero
+/** \brief IPsec policy database response
+ @param context - sender context which was passed in the request
+ €param entry - The SPD entry.
+ @param bytes - byte count of packets matching this policy
+ @param packets - count of packets matching this policy
+*/
+define ipsec_spd_details {
+ u32 context;
+ vl_api_ipsec_spd_entry_t entry;
+};
- @param is_tunnel - IPsec tunnel mode if non-zero, else transport mode
- @param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero
- @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
- @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
+/*
+ * @brief Support cryptographic algorithms
+ */
+enum ipsec_crypto_alg
+{
+ IPSEC_API_CRYPTO_ALG_NONE = 0,
+ IPSEC_API_CRYPTO_ALG_AES_CBC_128,
+ IPSEC_API_CRYPTO_ALG_AES_CBC_192,
+ IPSEC_API_CRYPTO_ALG_AES_CBC_256,
+ IPSEC_API_CRYPTO_ALG_AES_CTR_128,
+ IPSEC_API_CRYPTO_ALG_AES_CTR_192,
+ IPSEC_API_CRYPTO_ALG_AES_CTR_256,
+ IPSEC_API_CRYPTO_ALG_AES_GCM_128,
+ IPSEC_API_CRYPTO_ALG_AES_GCM_192,
+ IPSEC_API_CRYPTO_ALG_AES_GCM_256,
+ IPSEC_API_CRYPTO_ALG_DES_CBC,
+ IPSEC_API_CRYPTO_ALG_3DES_CBC,
+};
- To be added:
- Anti-replay
- IPsec tunnel address copy mode (to support GDOI)
+/*
+ * @brief Supported Integrity Algorithms
*/
+enum ipsec_integ_alg
+{
+ IPSEC_API_INTEG_ALG_NONE = 0,
+ /* RFC2403 */
+ IPSEC_API_INTEG_ALG_MD5_96,
+ /* RFC2404 */
+ IPSEC_API_INTEG_ALG_SHA1_96,
+ /* draft-ietf-ipsec-ciph-sha-256-00 */
+ IPSEC_API_INTEG_ALG_SHA_256_96,
+ /* RFC4868 */
+ IPSEC_API_INTEG_ALG_SHA_256_128,
+ /* RFC4868 */
+ IPSEC_API_INTEG_ALG_SHA_384_192,
+ /* RFC4868 */
+ IPSEC_API_INTEG_ALG_SHA_512_256,
+};
-autoreply define ipsec_sad_add_del_entry
+enum ipsec_sad_flags
{
- u32 client_index;
- u32 context;
- u8 is_add;
+ IPSEC_API_SAD_FLAG_NONE = 0,
+ /* Enable extended sequence numbers */
+ IPSEC_API_SAD_FLAG_USE_EXTENDED_SEQ_NUM = 0x01,
+ /* Enable Anti-replay */
+ IPSEC_API_SAD_FLAG_USE_ANTI_REPLAY = 0x02,
+ /* IPsec tunnel mode if non-zero, else transport mode */
+ IPSEC_API_SAD_FLAG_IS_TUNNEL = 0x04,
+ /* IPsec tunnel mode is IPv6 if non-zero,
+ * else IPv4 tunnel only valid if is_tunnel is non-zero */
+ IPSEC_API_SAD_FLAG_IS_TUNNEL_V6 = 0x08,
+ /* enable UDP encapsulation for NAT traversal */
+ IPSEC_API_SAD_FLAG_UDP_ENCAP = 0x10,
+
+ /* come-on Ole please fix this */
+ IPSEC_API_SAD_COMBO_12 = 12,
+ IPSEC_API_SAD_COMBO_20 = 20,
+};
+
+enum ipsec_proto
+{
+ IPSEC_API_PROTO_ESP,
+ IPSEC_API_PROTO_AH,
+};
+typedef key
+{
+ /* the length of the key */
+ u8 length;
+ /* The data for the key */
+ u8 data[128];
+};
+
+/** \brief IPsec: Security Association Database entry
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - add SAD entry if non-zero, else delete
+ @param sad_id - sad id
+ @param spi - security parameter index
+ @param protocol - 0 = AH, 1 = ESP
+ @param crypto_algorithm - a supported crypto algorithm
+ @param crypto_key - crypto keying material
+ @param integrity_algorithm - one of the supported algorithms
+ @param integrity_key - integrity keying material
+ @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
+ @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
+ @param tx_table_id - the FIB id used for encapsulated packets
+ */
+typedef ipsec_sad_entry
+{
u32 sad_id;
u32 spi;
- u8 protocol;
+ vl_api_ipsec_proto_t protocol;
- u8 crypto_algorithm;
- u8 crypto_key_length;
- u8 crypto_key[128];
+ vl_api_ipsec_crypto_alg_t crypto_algorithm;
+ vl_api_key_t crypto_key;
- u8 integrity_algorithm;
- u8 integrity_key_length;
- u8 integrity_key[128];
+ vl_api_ipsec_integ_alg_t integrity_algorithm;
+ vl_api_key_t integrity_key;
- u8 use_extended_sequence_number;
+ vl_api_ipsec_sad_flags_t flags;
- u8 is_tunnel;
- u8 is_tunnel_ipv6;
- u8 tunnel_src_address[16];
- u8 tunnel_dst_address[16];
+ vl_api_address_t tunnel_src;
+ vl_api_address_t tunnel_dst;
+ u32 tx_table_id;
+};
+
+/** \brief IPsec: Add/delete Security Association Database entry
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param entry - Entry to add or delete
+ */
+define ipsec_sad_entry_add_del
+{
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ vl_api_ipsec_sad_entry_t entry;
+};
+define ipsec_sad_entry_add_del_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stat_index;
};
/** \brief IPsec: Update Security Association keys
@param sa_id - sa id
- @param crypto_key_length - length of crypto_key in bytes
@param crypto_key - crypto keying material
-
- @param integrity_key_length - length of integrity_key in bytes
@param integrity_key - integrity keying material
*/
u32 sa_id;
- u8 crypto_key_length;
- u8 crypto_key[128];
-
- u8 integrity_key_length;
- u8 integrity_key[128];
+ vl_api_key_t crypto_key;
+ vl_api_key_t integrity_key;
};
/** \brief IKEv2: Add/delete profile
u8 auth_method;
u8 is_hex;
u32 data_len;
- u8 data[0];
+ u8 data[data_len];
};
/** \brief IKEv2: Set IKEv2 profile local/remote identification
u8 is_local;
u8 id_type;
u32 data_len;
- u8 data[0];
+ u8 data[data_len];
};
/** \brief IKEv2: Set IKEv2 profile traffic selector parameters
@param name - IKEv2 profile name
@param lifetime - SA maximum life time in seconds (0 to disable)
- @param lifetime_jitter - Jitter added to prevent simultaneounus rekeying
+ @param lifetime_jitter - Jitter added to prevent simultaneous rekeying
@param handover - Hand over time
@param lifetime_maxdata - SA maximum life time in bytes (0 to disable)
u32 ispi;
};
-/** \brief Dump ipsec policy database data
+/** \brief IPsec: Get SPD interfaces
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param spd_id - SPD instance id
- @param sa_id - SA id, optional, set to ~0 to see all policies in SPD
+ @param spd_index - SPD index
+ @param spd_index_valid - if 1 spd_index is used to filter
+ spd_index's, if 0 no filtering is done
*/
-define ipsec_spd_dump {
+define ipsec_spd_interface_dump {
u32 client_index;
u32 context;
- u32 spd_id;
- u32 sa_id;
+ u32 spd_index;
+ u8 spd_index_valid;
};
-/** \brief IPsec policy database response
+/** \brief IPsec: SPD interface response
@param context - sender context which was passed in the request
- @param spd_id - SPD instance id
- @param priority - numeric value to control policy evaluation order
- @param is_outbound - [1|0] to indicate if direction is [out|in]bound
- @param is_ipv6 - [1|0] to indicate if address family is ipv[6|4]
- @param local_start_addr - first address in local traffic selector range
- @param local_stop_addr - last address in local traffic selector range
- @param local_start_port - first port in local traffic selector range
- @param local_stop_port - last port in local traffic selector range
- @param remote_start_addr - first address in remote traffic selector range
- @param remote_stop_addr - last address in remote traffic selector range
- @param remote_start_port - first port in remote traffic selector range
- @param remote_stop_port - last port in remote traffic selector range
- @param protocol - traffic selector protocol
- @param policy - policy action
- @param sa_id - SA id
- @param bytes - byte count of packets matching this policy
- @param packets - count of packets matching this policy
+ @param spd_index - SPD index
+ @param sw_if_index - index of the interface
*/
-
-define ipsec_spd_details {
+define ipsec_spd_interface_details {
u32 context;
- u32 spd_id;
- i32 priority;
- u8 is_outbound;
- u8 is_ipv6;
- u8 local_start_addr[16];
- u8 local_stop_addr[16];
- u16 local_start_port;
- u16 local_stop_port;
- u8 remote_start_addr[16];
- u8 remote_stop_addr[16];
- u16 remote_start_port;
- u16 remote_stop_port;
- u8 protocol;
- u8 policy;
- u32 sa_id;
- u64 bytes;
- u64 packets;
+ u32 spd_index;
+ u32 sw_if_index;
+};
+
+/** \brief Add or delete IPsec tunnel interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - add IPsec tunnel interface if nonzero, else delete
+ @param esn - enable extended sequence numbers if nonzero, else disable
+ @param anti_replay - enable anti replay check if nonzero, else disable
+ @param local_ip - local IP address
+ @param remote_ip - IP address of remote IPsec peer
+ @param local_spi - SPI of outbound IPsec SA
+ @param remote_spi - SPI of inbound IPsec SA
+ @param crypto_alg - encryption algorithm ID
+ @param local_crypto_key_len - length of local crypto key in bytes
+ @param local_crypto_key - crypto key for outbound IPsec SA
+ @param remote_crypto_key_len - length of remote crypto key in bytes
+ @param remote_crypto_key - crypto key for inbound IPsec SA
+ @param integ_alg - integrity algorithm ID
+ @param local_integ_key_len - length of local integrity key in bytes
+ @param local_integ_key - integrity key for outbound IPsec SA
+ @param remote_integ_key_len - length of remote integrity key in bytes
+ @param remote_integ_key - integrity key for inbound IPsec SA
+ @param renumber - intf display name uses a specified instance if != 0
+ @param show_instance - instance to display for intf if renumber is set
+ @param udp_encap - enable UDP encapsulation for NAT traversal
+ @param tx_table_id - the FIB id used after packet encap
+*/
+define ipsec_tunnel_if_add_del {
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ u8 esn;
+ u8 anti_replay;
+ u8 local_ip[4];
+ u8 remote_ip[4];
+ u32 local_spi;
+ u32 remote_spi;
+ u8 crypto_alg;
+ u8 local_crypto_key_len;
+ u8 local_crypto_key[128];
+ u8 remote_crypto_key_len;
+ u8 remote_crypto_key[128];
+ u8 integ_alg;
+ u8 local_integ_key_len;
+ u8 local_integ_key[128];
+ u8 remote_integ_key_len;
+ u8 remote_integ_key[128];
+ u8 renumber;
+ u32 show_instance;
+ u8 udp_encap;
+ u32 tx_table_id;
+};
+
+/** \brief Add/delete IPsec tunnel interface response
+ @param context - sender context, to match reply w/ request
+ @param retval - return status
+ @param sw_if_index - sw_if_index of new interface (for successful add)
+*/
+define ipsec_tunnel_if_add_del_reply {
+ u32 context;
+ i32 retval;
+ u32 sw_if_index;
+};
+
+/** \brief Dump IPsec security association
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sa_id - optional ID of an SA to dump, if ~0 dump all SAs in SAD
+*/
+define ipsec_sa_dump {
+ u32 client_index;
+ u32 context;
+ u32 sa_id;
+};
+
+/** \brief IPsec security association database response
+ @param context - sender context which was passed in the request
+ @param sa_id - SA ID, policy-based SAs >=0, tunnel interface SAs = 0
+ @param sw_if_index - sw_if_index of tunnel interface, policy-based SAs = ~0
+ @param spi - security parameter index
+ @param protocol - IPsec protocol (value from ipsec_protocol_t)
+ @param crypto_alg - crypto algorithm (value from ipsec_crypto_alg_t)
+ @param crypto_key_len - length of crypto_key in bytes
+ @param crypto_key - crypto keying material
+ @param integ_alg - integrity algorithm (value from ipsec_integ_alg_t)
+ @param integ_key_len - length of integ_key in bytes
+ @param integ_key - integrity keying material
+ @param use_esn - using extended sequence numbers when non-zero
+ @param use_anti_replay - using anti-replay window when non-zero
+ @param is_tunnel - IPsec tunnel mode when non-zero, else transport mode
+ @param is_tunnel_ipv6 - If using tunnel mode, endpoints are IPv6
+ @param tunnel_src_addr - Tunnel source address if using tunnel mode
+ @param tunnel_dst_addr - Tunnel destination address is using tunnel mode
+ @param salt - 4 byte salt
+ @param seq - current sequence number for outbound
+ @param seq_hi - high 32 bits of ESN for outbound
+ @param last_seq - highest sequence number received inbound
+ @param last_seq_hi - high 32 bits of highest ESN received inbound
+ @param replay_window - bit map of seq nums received relative to last_seq if using anti-replay
+ @param total_data_size - total bytes sent or received
+ @param udp_encap - 1 if UDP encap enabled, 0 otherwise
+*/
+define ipsec_sa_details {
+ u32 context;
+ vl_api_ipsec_sad_entry_t entry;
+
+ u32 sw_if_index;
+ u32 salt;
+ u64 seq_outbound;
+ u64 last_seq_inbound;
+ u64 replay_window;
+
+ u64 total_data_size;
+};
+
+/** \brief Set key on IPsec interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - index of tunnel interface
+ @param key_type - type of key being set
+ @param alg - algorithm used with key
+ @param key_len - length key in bytes
+ @param key - key
+*/
+autoreply define ipsec_tunnel_if_set_key {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 key_type;
+ u8 alg;
+ u8 key_len;
+ u8 key[128];
+};
+
+/** \brief Set new SA on IPsec interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - index of tunnel interface
+ @param sa_id - ID of SA to use
+ @param is_outbound - 1 if outbound (local) SA, 0 if inbound (remote)
+*/
+autoreply define ipsec_tunnel_if_set_sa {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 sa_id;
+ u8 is_outbound;
+};
+
+/** \brief Dump IPsec backends
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define ipsec_backend_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief IPsec backend details
+ @param name - name of the backend
+ @param protocol - IPsec protocol (value from ipsec_protocol_t)
+ @param index - backend index
+ @param active - set to 1 if the backend is active, otherwise 0
+*/
+define ipsec_backend_details {
+ u32 context;
+ u8 name[128];
+ vl_api_ipsec_proto_t protocol;
+ u8 index;
+ u8 active;
+};
+
+/** \brief Select IPsec backend
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param protocol - IPsec protocol (value from ipsec_protocol_t)
+ @param index - backend index
+*/
+autoreply define ipsec_select_backend {
+ u32 client_index;
+ u32 context;
+ vl_api_ipsec_proto_t protocol;
+ u8 index;
};
/*