#include <vnet/mfib/mfib_table.h>
#include <vnet/adj/adj_mcast.h>
#include <vnet/interface.h>
+#include <vnet/udp/udp_local.h>
#include <vlib/vlib.h>
/**
vxlan_gpe_tunnel_t *t = va_arg (*args, vxlan_gpe_tunnel_t *);
vxlan_gpe_main_t *ngm = &vxlan_gpe_main;
- s = format (s, "[%d] lcl %U rmt %U vni %d fib-idx %d sw-if-idx %d ",
- t - ngm->tunnels,
- format_ip46_address, &t->local, IP46_TYPE_ANY,
- format_ip46_address, &t->remote, IP46_TYPE_ANY,
- t->vni, t->encap_fib_index, t->sw_if_index);
+ s = format (s,
+ "[%d] lcl %U rmt %U lcl_port %d rmt_port %d vni %d "
+ "fib-idx %d sw-if-idx %d ",
+ t - ngm->tunnels, format_ip46_address, &t->local, IP46_TYPE_ANY,
+ format_ip46_address, &t->remote, IP46_TYPE_ANY, t->local_port,
+ t->remote_port, t->vni, t->encap_fib_index, t->sw_if_index);
#if 0
/* next_dpo not yet used by vxlan-gpe-encap node */
.fnv_back_walk = vxlan_gpe_tunnel_back_walk,
};
-#define foreach_gpe_copy_field \
-_(vni) \
-_(protocol) \
-_(mcast_sw_if_index) \
-_(encap_fib_index) \
-_(decap_fib_index)
+#define foreach_gpe_copy_field \
+ _ (vni) \
+ _ (protocol) \
+ _ (mcast_sw_if_index) \
+ _ (encap_fib_index) \
+ _ (decap_fib_index) \
+ _ (local_port) \
+ _ (remote_port)
#define foreach_copy_ipv4 { \
_(local.ip4.as_u32) \
ip0->checksum = ip4_header_checksum (ip0);
/* UDP header, randomize src port on something, maybe? */
- h0->udp.src_port = clib_host_to_net_u16 (4790);
- h0->udp.dst_port = clib_host_to_net_u16 (UDP_DST_PORT_VXLAN_GPE);
+ h0->udp.src_port = clib_host_to_net_u16 (t->local_port);
+ h0->udp.dst_port = clib_host_to_net_u16 (t->remote_port);
/* VXLAN header. Are we having fun yet? */
h0->vxlan.flags = VXLAN_GPE_FLAGS_I | VXLAN_GPE_FLAGS_P;
ip0->dst_address.as_u64[1] = t->remote.ip6.as_u64[1];
/* UDP header, randomize src port on something, maybe? */
- h0->udp.src_port = clib_host_to_net_u16 (4790);
- h0->udp.dst_port = clib_host_to_net_u16 (UDP_DST_PORT_VXLAN_GPE);
+ h0->udp.src_port = clib_host_to_net_u16 (t->local_port);
+ h0->udp.dst_port = clib_host_to_net_u16 (t->remote_port);
/* VXLAN header. Are we having fun yet? */
h0->vxlan.flags = VXLAN_GPE_FLAGS_I | VXLAN_GPE_FLAGS_P;
vxlan6_gpe_tunnel_key_t key6, *key6_copy;
u32 is_ip6 = a->is_ip6;
+ /* Set udp-ports */
+ if (a->local_port == 0)
+ a->local_port = is_ip6 ? UDP_DST_PORT_VXLAN6_GPE : UDP_DST_PORT_VXLAN_GPE;
+
+ if (a->remote_port == 0)
+ a->remote_port = is_ip6 ? UDP_DST_PORT_VXLAN6_GPE : UDP_DST_PORT_VXLAN_GPE;
+
if (!is_ip6)
{
key4.local = a->local.ip4.as_u32;
key4.remote = a->remote.ip4.as_u32;
key4.vni = clib_host_to_net_u32 (a->vni << 8);
- key4.pad = 0;
+ key4.port = (u32) clib_host_to_net_u16 (a->local_port);
p = hash_get_mem (ngm->vxlan4_gpe_tunnel_by_key, &key4);
}
key6.remote.as_u64[0] = a->remote.ip6.as_u64[0];
key6.remote.as_u64[1] = a->remote.ip6.as_u64[1];
key6.vni = clib_host_to_net_u32 (a->vni << 8);
+ key6.port = (u32) clib_host_to_net_u16 (a->local_port);
p = hash_get_mem (ngm->vxlan6_gpe_tunnel_by_key, &key6);
}
if (a->is_add)
{
/* register udp ports */
- if (!is_ip6 && !udp_is_valid_dst_port (UDP_DST_PORT_VXLAN_GPE, 1))
- udp_register_dst_port (ngm->vlib_main, UDP_DST_PORT_VXLAN_GPE,
- vxlan4_gpe_input_node.index, 1 /* is_ip4 */ );
- if (is_ip6 && !udp_is_valid_dst_port (UDP_DST_PORT_VXLAN6_GPE, 0))
- udp_register_dst_port (ngm->vlib_main, UDP_DST_PORT_VXLAN6_GPE,
- vxlan6_gpe_input_node.index, 0 /* is_ip4 */ );
+ if (!is_ip6 && !udp_is_valid_dst_port (a->local_port, 1))
+ udp_register_dst_port (ngm->vlib_main, a->local_port,
+ vxlan4_gpe_input_node.index, 1 /* is_ip4 */);
+ if (is_ip6 && !udp_is_valid_dst_port (a->remote_port, 0))
+ udp_register_dst_port (ngm->vlib_main, a->remote_port,
+ vxlan6_gpe_input_node.index, 0 /* is_ip4 */);
}
return 0;
u8 protocol = VXLAN_GPE_PROTOCOL_IP4;
u32 vni;
u8 vni_set = 0;
+ u32 local_port = 0;
+ u32 remote_port = 0;
int rv;
u32 tmp;
vnet_vxlan_gpe_add_del_tunnel_args_t _a, *a = &_a;
}
else if (unformat (line_input, "vni %d", &vni))
vni_set = 1;
+ else if (unformat (line_input, "local_port %d", &local_port))
+ ;
+ else if (unformat (line_input, "remote_port %d", &remote_port))
+ ;
else if (unformat (line_input, "next-ip4"))
protocol = VXLAN_GPE_PROTOCOL_IP4;
else if (unformat (line_input, "next-ip6"))
vlib_cli_output (vm, "No vxlan-gpe tunnels configured.");
/* *INDENT-OFF* */
- pool_foreach (t, ngm->tunnels,
- ({
+ pool_foreach (t, ngm->tunnels)
+ {
vlib_cli_output (vm, "%U", format_vxlan_gpe_tunnel, t);
- }));
+ }
/* *INDENT-ON* */
return 0;
}
/*?
- * This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given interface.
- * By adding the IPv4 vxlan-gpe-bypass graph node to an interface, the node checks
- * for and validate input vxlan_gpe packet and bypass ip4-lookup, ip4-local,
- * ip4-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will
- * cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum.
+ * This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given
+ * interface. By adding the IPv4 vxlan-gpe-bypass graph node to an interface,
+ * the node checks for and validate input vxlan_gpe packet and bypass
+ * ip4-lookup, ip4-local, ip4-udp-lookup nodes to speedup vxlan_gpe packet
+ * forwarding. This node will cause extra overhead to for non-vxlan_gpe
+ * packets which is kept at a minimum.
*
* @cliexpar
* @parblock
*
* Example of graph node after ip4-vxlan-gpe-bypass is enabled:
* @cliexstart{show vlib graph ip4-vxlan-gpe-bypass}
- * Name Next Previous
- * ip4-vxlan-gpe-bypass error-drop [0] ip4-input
- * vxlan4-gpe-input [1] ip4-input-no-checksum
- * ip4-lookup [2]
+ * Name Next Previous
+ * ip4-vxlan-gpe-bypass error-drop [0] ip4-input
+ * vxlan4-gpe-input [1] ip4-input-no-checksum
+ * ip4-lookup [2]
* @cliexend
*
* Example of how to display the feature enabled on an interface:
}
/*?
- * This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given interface.
- * By adding the IPv6 vxlan-gpe-bypass graph node to an interface, the node checks
- * for and validate input vxlan_gpe packet and bypass ip6-lookup, ip6-local,
- * ip6-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will
- * cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum.
+ * This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given
+ * interface. By adding the IPv6 vxlan-gpe-bypass graph node to an interface,
+ * the node checks for and validate input vxlan_gpe packet and bypass
+ * ip6-lookup, ip6-local, ip6-udp-lookup nodes to speedup vxlan_gpe packet
+ * forwarding. This node will cause extra overhead to for non-vxlan_gpe packets
+ * which is kept at a minimum.
*
* @cliexpar
* @parblock
*
* Example of graph node after ip6-vxlan-gpe-bypass is enabled:
* @cliexstart{show vlib graph ip6-vxlan-gpe-bypass}
- * Name Next Previous
- * ip6-vxlan-gpe-bypass error-drop [0] ip6-input
- * vxlan6-gpe-input [1] ip4-input-no-checksum
- * ip6-lookup [2]
+ * Name Next Previous
+ * ip6-vxlan-gpe-bypass error-drop [0] ip6-input
+ * vxlan6-gpe-input [1] ip4-input-no-checksum
+ * ip6-lookup [2]
* @cliexend
*
* Example of how to display the feature enabled on an interface:
Code Review / vpp.git / blobdiff