full-coredump
cli-listen /run/vpp/cli.sock
gid vpp
+
+ ## run vpp in the interactive mode
+ # interactive
+
+ ## do not use colors in terminal output
+ # nocolor
+
+ ## do not display banner
+ # nobanner
}
api-trace {
default
}
+# memory {
+ ## Set the main heap size, default is 1G
+ # main-heap-size 2G
+
+ ## Set the main heap page size. Default page size is OS default page
+ ## which is in most cases 4K. if different page size is specified VPP
+ ## will try to allocate main heap by using specified page size.
+ ## special keyword 'default-hugepage' will use system default hugepage
+ ## size
+ # main-heap-page-size 1G
+#}
+
cpu {
## In the VPP there is one main thread and optionally the user can create worker(s)
## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
# scheduler-priority 50
}
+# buffers {
+ ## Increase number of buffers allocated, needed only in scenarios with
+ ## large number of interfaces and worker threads. Value is per numa node.
+ ## Default is 16384 (8192 if running unpriviledged)
+ # buffers-per-numa 128000
+
+ ## Size of buffer data area
+ ## Default is 2048
+ # default data-size 2048
+# }
+
# dpdk {
## Change default settings for all interfaces
# dev default {
## VLAN strip offload mode for interface
## Default is off
# vlan-strip-offload on
+
+ ## TCP Segment Offload
+ ## Default is off
+ ## To enable TSO, 'enable-tcp-udp-checksum' must be set
+ # tso on
+
+ ## Devargs
+ ## device specific init args
+ ## Default is NULL
+ # devargs safe-mode-support=1,pipeline-mode-support=1
+
+ ## rss-queues
+ ## set valid rss steering queues
+ # rss-queues 0,2,5-7
# }
## Whitelist specific interface by specifying PCI address
# dev 0000:02:00.0
+ ## Blacklist specific device type by specifying PCI vendor:device
+ ## Whitelist entries take precedence
+ # blacklist 8086:10fb
+
## Set interface name
# dev 0000:02:00.1 {
# name eth0
# num-rx-queues 2
# }
- ## Specify bonded interface and its slaves via PCI addresses
- ##
- ## Bonded interface in XOR load balance mode (mode 2) with L3 and L4 headers
- # vdev eth_bond0,mode=2,slave=0000:02:00.0,slave=0000:03:00.0,xmit_policy=l34
- # vdev eth_bond1,mode=2,slave=0000:02:00.1,slave=0000:03:00.1,xmit_policy=l34
- ##
- ## Bonded interface in Active-Back up mode (mode 1)
- # vdev eth_bond0,mode=1,slave=0000:02:00.0,slave=0000:03:00.0
- # vdev eth_bond1,mode=1,slave=0000:02:00.1,slave=0000:03:00.1
-
## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci,
## uio_pci_generic or auto (default)
# uio-driver vfio-pci
## disables Jumbo MTU support
# no-multi-seg
- ## Increase number of buffers allocated, needed only in scenarios with
- ## large number of interfaces and worker threads. Value is per CPU socket.
- ## Default is 16384
- # num-mbufs 128000
-
## Change hugepages allocation per-socket, needed only if there is need for
## larger number of mbufs. Default is 256M on each detected CPU socket
# socket-mem 2048,2048
## Disables UDP / TCP TX checksum offload. Typically needed for use
## faster vector PMDs (together with no-multi-seg)
# no-tx-checksum-offload
+
+ ## Enable UDP / TCP TX checksum offload
+ ## This is the reversed option of 'no-tx-checksum-offload'
+ # enable-tcp-udp-checksum
# }
+## node variant defaults
+#node {
+
+## specify the preferred default variant
+# default { variant avx512 }
+
+## specify the preferred variant, for a given node
+# ip4-rewrite { variant avx2 }
+
+#}
+
# plugins {
## Adjusting the plugin path depending on where the VPP plugins are
- # path /home/bms/vpp/build-root/install-vpp-native/vpp/lib/vpp_plugins
+ # path /ws/vpp/build-root/install-vpp-native/vpp/lib/vpp_plugins
## Disable all plugins by default and then selectively enable specific plugins
# plugin default { disable }
# plugin acl_plugin.so { disable }
# }
- ## Alternate syntax to choose plugin path
- # plugin_path /home/bms/vpp/build-root/install-vpp-native/vpp/lib/vpp_plugins
+## Statistics Segment
+# statseg {
+ # socket-name <filename>, name of the stats segment socket
+ # defaults to /run/vpp/stats.sock
+ # size <nnn>[KMG], size of the stats segment, defaults to 32mb
+ # page-size <nnn>, page size, ie. 2m, defaults to 4k
+ # per-node-counters on | off, defaults to none
+ # update-interval <f64-seconds>, sets the segment scrape / update interval
+# }
+
+## L2 FIB
+# l2fib {
+ ## l2fib hash table size.
+ # table-size 512M
+
+ ## l2fib hash table number of buckets. Must be power of 2.
+ # num-buckets 524288
+# }
+
+## ipsec
+# {
+ # ip4 {
+ ## ipsec for ipv4 tunnel lookup hash number of buckets.
+ # num-buckets 524288
+ # }
+ # ip6 {
+ ## ipsec for ipv6 tunnel lookup hash number of buckets.
+ # num-buckets 524288
+ # }
+# }
+
+# logging {
+ ## set default logging level for logging buffer
+ ## logging levels: emerg, alert,crit, error, warn, notice, info, debug, disabled
+ # default-log-level debug
+ ## set default logging level for syslog or stderr output
+ # default-syslog-log-level info
+# }
Code Review / vpp.git / blobdiff