tests: Add support for getting corefile patterns on FreeBSD
[vpp.git] / test / test_dvr.py
index ae7864c..e616408 100644 (file)
@@ -1,21 +1,24 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 import unittest
 
-from framework import VppTestCase, VppTestRunner
-from vpp_ip_route import VppIpRoute, VppRoutePath
+from framework import VppTestCase
+from asfframework import VppTestRunner
+from vpp_ip_route import VppIpRoute, VppRoutePath, FibPathType
 from vpp_l2 import L2_PORT_TYPE
 from vpp_sub_interface import L2_VTR_OP, VppDot1QSubint
+from vpp_acl import AclRule, VppAcl, VppAclInterface
 
 from scapy.packet import Raw
 from scapy.layers.l2 import Ether, Dot1Q
 from scapy.layers.inet import IP, UDP
-from socket import AF_INET, inet_pton
+from socket import AF_INET
+from ipaddress import IPv4Network
 
 NUM_PKTS = 67
 
 
 class TestDVR(VppTestCase):
-    """ Distributed Virtual Router """
+    """Distributed Virtual Router"""
 
     @classmethod
     def setUpClass(cls):
@@ -60,7 +63,7 @@ class TestDVR(VppTestCase):
             self.assertFalse(p.haslayer(Dot1Q))
 
     def test_dvr(self):
-        """ Distributed Virtual Router """
+        """Distributed Virtual Router"""
 
         #
         # A packet destined to an IP address that is L2 bridged via
@@ -70,18 +73,18 @@ class TestDVR(VppTestCase):
         ip_tag_bridged = "10.10.10.11"
         any_src_addr = "1.1.1.1"
 
-        pkt_no_tag = (Ether(src=self.pg0.remote_mac,
-                            dst=self.loop0.local_mac) /
-                      IP(src=any_src_addr,
-                         dst=ip_non_tag_bridged) /
-                      UDP(sport=1234, dport=1234) /
-                      Raw('\xa5' * 100))
-        pkt_tag = (Ether(src=self.pg0.remote_mac,
-                         dst=self.loop0.local_mac) /
-                   IP(src=any_src_addr,
-                      dst=ip_tag_bridged) /
-                   UDP(sport=1234, dport=1234) /
-                   Raw('\xa5' * 100))
+        pkt_no_tag = (
+            Ether(src=self.pg0.remote_mac, dst=self.loop0.local_mac)
+            / IP(src=any_src_addr, dst=ip_non_tag_bridged)
+            / UDP(sport=1234, dport=1234)
+            / Raw(b"\xa5" * 100)
+        )
+        pkt_tag = (
+            Ether(src=self.pg0.remote_mac, dst=self.loop0.local_mac)
+            / IP(src=any_src_addr, dst=ip_tag_bridged)
+            / UDP(sport=1234, dport=1234)
+            / Raw(b"\xa5" * 100)
+        )
 
         #
         # Two sub-interfaces so we can test VLAN tag push/pop
@@ -95,32 +98,45 @@ class TestDVR(VppTestCase):
         # Put all the interfaces into a new bridge domain
         #
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg0.sw_if_index, bd_id=1)
+            rx_sw_if_index=self.pg0.sw_if_index, bd_id=1
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg1.sw_if_index, bd_id=1)
+            rx_sw_if_index=self.pg1.sw_if_index, bd_id=1
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1)
+            rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1)
+            rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.loop0.sw_if_index, bd_id=1,
-            port_type=L2_PORT_TYPE.BVI)
+            rx_sw_if_index=self.loop0.sw_if_index, bd_id=1, port_type=L2_PORT_TYPE.BVI
+        )
 
         self.vapi.l2_interface_vlan_tag_rewrite(
-            sw_if_index=sub_if_on_pg2.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1,
-            push_dot1q=92)
+            sw_if_index=sub_if_on_pg2.sw_if_index,
+            vtr_op=L2_VTR_OP.L2_POP_1,
+            push_dot1q=92,
+        )
         self.vapi.l2_interface_vlan_tag_rewrite(
-            sw_if_index=sub_if_on_pg3.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1,
-            push_dot1q=93)
+            sw_if_index=sub_if_on_pg3.sw_if_index,
+            vtr_op=L2_VTR_OP.L2_POP_1,
+            push_dot1q=93,
+        )
 
         #
         # Add routes to bridge the traffic via a tagged an nontagged interface
         #
         route_no_tag = VppIpRoute(
-            self, ip_non_tag_bridged, 32,
-            [VppRoutePath("0.0.0.0",
-                          self.pg1.sw_if_index,
-                          is_dvr=1)])
+            self,
+            ip_non_tag_bridged,
+            32,
+            [
+                VppRoutePath(
+                    "0.0.0.0", self.pg1.sw_if_index, type=FibPathType.FIB_PATH_TYPE_DVR
+                )
+            ],
+        )
         route_no_tag.add_vpp_config()
 
         #
@@ -135,10 +151,17 @@ class TestDVR(VppTestCase):
         # Add routes to bridge the traffic via a tagged interface
         #
         route_with_tag = VppIpRoute(
-            self, ip_tag_bridged, 32,
-            [VppRoutePath("0.0.0.0",
-                          sub_if_on_pg3.sw_if_index,
-                          is_dvr=1)])
+            self,
+            ip_tag_bridged,
+            32,
+            [
+                VppRoutePath(
+                    "0.0.0.0",
+                    sub_if_on_pg3.sw_if_index,
+                    type=FibPathType.FIB_PATH_TYPE_DVR,
+                )
+            ],
+        )
         route_with_tag.add_vpp_config()
 
         #
@@ -152,100 +175,98 @@ class TestDVR(VppTestCase):
         #
         # Tag to tag
         #
-        pkt_tag_to_tag = (Ether(src=self.pg2.remote_mac,
-                                dst=self.loop0.local_mac) /
-                          Dot1Q(vlan=92) /
-                          IP(src=any_src_addr,
-                             dst=ip_tag_bridged) /
-                          UDP(sport=1234, dport=1234) /
-                          Raw('\xa5' * 100))
-
-        rx = self.send_and_expect(self.pg2,
-                                  pkt_tag_to_tag * NUM_PKTS,
-                                  self.pg3)
+        pkt_tag_to_tag = (
+            Ether(src=self.pg2.remote_mac, dst=self.loop0.local_mac)
+            / Dot1Q(vlan=92)
+            / IP(src=any_src_addr, dst=ip_tag_bridged)
+            / UDP(sport=1234, dport=1234)
+            / Raw(b"\xa5" * 100)
+        )
+
+        rx = self.send_and_expect(self.pg2, pkt_tag_to_tag * NUM_PKTS, self.pg3)
         self.assert_same_mac_addr(pkt_tag_to_tag, rx)
         self.assert_has_vlan_tag(93, rx)
 
         #
         # Tag to non-Tag
         #
-        pkt_tag_to_non_tag = (Ether(src=self.pg2.remote_mac,
-                                    dst=self.loop0.local_mac) /
-                              Dot1Q(vlan=92) /
-                              IP(src=any_src_addr,
-                                 dst=ip_non_tag_bridged) /
-                              UDP(sport=1234, dport=1234) /
-                              Raw('\xa5' * 100))
-
-        rx = self.send_and_expect(self.pg2,
-                                  pkt_tag_to_non_tag * NUM_PKTS,
-                                  self.pg1)
+        pkt_tag_to_non_tag = (
+            Ether(src=self.pg2.remote_mac, dst=self.loop0.local_mac)
+            / Dot1Q(vlan=92)
+            / IP(src=any_src_addr, dst=ip_non_tag_bridged)
+            / UDP(sport=1234, dport=1234)
+            / Raw(b"\xa5" * 100)
+        )
+
+        rx = self.send_and_expect(self.pg2, pkt_tag_to_non_tag * NUM_PKTS, self.pg1)
         self.assert_same_mac_addr(pkt_tag_to_tag, rx)
         self.assert_has_no_tag(rx)
 
         #
         # Add an output L3 ACL that will block the traffic
         #
-        rule_1 = ({'is_permit': 0,
-                   'is_ipv6': 0,
-                   'proto': 17,
-                   'srcport_or_icmptype_first': 1234,
-                   'srcport_or_icmptype_last': 1234,
-                   'src_ip_prefix_len': 32,
-                   'src_ip_addr': inet_pton(AF_INET, any_src_addr),
-                   'dstport_or_icmpcode_first': 1234,
-                   'dstport_or_icmpcode_last': 1234,
-                   'dst_ip_prefix_len': 32,
-                   'dst_ip_addr': inet_pton(AF_INET, ip_non_tag_bridged)})
-        acl = self.vapi.acl_add_replace(acl_index=4294967295,
-                                        r=[rule_1])
+        rule_1 = AclRule(
+            is_permit=0,
+            proto=17,
+            ports=1234,
+            src_prefix=IPv4Network((any_src_addr, 32)),
+            dst_prefix=IPv4Network((ip_non_tag_bridged, 32)),
+        )
+        acl = VppAcl(self, rules=[rule_1])
+        acl.add_vpp_config()
 
         #
         # Apply the ACL on the output interface
         #
-        self.vapi.acl_interface_set_acl_list(self.pg1.sw_if_index,
-                                             0,
-                                             [acl.acl_index])
+        acl_if1 = VppAclInterface(
+            self, sw_if_index=self.pg1.sw_if_index, n_input=0, acls=[acl]
+        )
+        acl_if1.add_vpp_config()
 
         #
         # Send packet's that should match the ACL and be dropped
         #
-        rx = self.send_and_assert_no_replies(self.pg2,
-                                             pkt_tag_to_non_tag * NUM_PKTS)
+        rx = self.send_and_assert_no_replies(self.pg2, pkt_tag_to_non_tag * NUM_PKTS)
 
         #
         # cleanup
         #
-        self.vapi.acl_interface_set_acl_list(self.pg1.sw_if_index,
-                                             0, [])
-        self.vapi.acl_del(acl.acl_index)
+        acl_if1.remove_vpp_config()
+        acl.remove_vpp_config()
 
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg0.sw_if_index, bd_id=1, enable=0)
+            rx_sw_if_index=self.pg0.sw_if_index, bd_id=1, enable=0
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0)
+            rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1, enable=0)
+            rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1, enable=0
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1, enable=0)
+            rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1, enable=0
+        )
         self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.loop0.sw_if_index, bd_id=1,
-            port_type=L2_PORT_TYPE.BVI, enable=0)
+            rx_sw_if_index=self.loop0.sw_if_index,
+            bd_id=1,
+            port_type=L2_PORT_TYPE.BVI,
+            enable=0,
+        )
 
         #
         # Do a FIB dump to make sure the paths are correctly reported as DVR
         #
-        routes = self.vapi.ip_fib_dump()
+        routes = self.vapi.ip_route_dump(0)
 
         for r in routes:
-            if (inet_pton(AF_INET, ip_tag_bridged) == r.address):
-                self.assertEqual(r.path[0].sw_if_index,
-                                 sub_if_on_pg3.sw_if_index)
-                self.assertEqual(r.path[0].is_dvr, 1)
-            if (inet_pton(AF_INET, ip_non_tag_bridged) == r.address):
-                self.assertEqual(r.path[0].sw_if_index,
-                                 self.pg1.sw_if_index)
-                self.assertEqual(r.path[0].is_dvr, 1)
+            if ip_tag_bridged == str(r.route.prefix.network_address):
+                self.assertEqual(
+                    r.route.paths[0].sw_if_index, sub_if_on_pg3.sw_if_index
+                )
+                self.assertEqual(r.route.paths[0].type, FibPathType.FIB_PATH_TYPE_DVR)
+            if ip_non_tag_bridged == str(r.route.prefix.network_address):
+                self.assertEqual(r.route.paths[0].sw_if_index, self.pg1.sw_if_index)
+                self.assertEqual(r.route.paths[0].type, FibPathType.FIB_PATH_TYPE_DVR)
 
         #
         # the explicit route delete is require so it happens before
@@ -257,157 +278,6 @@ class TestDVR(VppTestCase):
         sub_if_on_pg3.remove_vpp_config()
         sub_if_on_pg2.remove_vpp_config()
 
-    def test_l2_emulation(self):
-        """ L2 Emulation """
-
-        #
-        # non distinct L3 packets, in the tag/non-tag combos
-        #
-        pkt_no_tag = (Ether(src=self.pg0.remote_mac,
-                            dst=self.pg1.remote_mac) /
-                      IP(src="2.2.2.2",
-                         dst="1.1.1.1") /
-                      UDP(sport=1234, dport=1234) /
-                      Raw('\xa5' * 100))
-        pkt_to_tag = (Ether(src=self.pg0.remote_mac,
-                            dst=self.pg2.remote_mac) /
-                      IP(src="2.2.2.2",
-                         dst="1.1.1.2") /
-                      UDP(sport=1234, dport=1234) /
-                      Raw('\xa5' * 100))
-        pkt_from_tag = (Ether(src=self.pg3.remote_mac,
-                              dst=self.pg2.remote_mac) /
-                        Dot1Q(vlan=93) /
-                        IP(src="2.2.2.2",
-                           dst="1.1.1.1") /
-                        UDP(sport=1234, dport=1234) /
-                        Raw('\xa5' * 100))
-        pkt_from_to_tag = (Ether(src=self.pg3.remote_mac,
-                                 dst=self.pg2.remote_mac) /
-                           Dot1Q(vlan=93) /
-                           IP(src="2.2.2.2",
-                              dst="1.1.1.2") /
-                           UDP(sport=1234, dport=1234) /
-                           Raw('\xa5' * 100))
-        pkt_bcast = (Ether(src=self.pg0.remote_mac,
-                           dst="ff:ff:ff:ff:ff:ff") /
-                     IP(src="2.2.2.2",
-                        dst="255.255.255.255") /
-                     UDP(sport=1234, dport=1234) /
-                     Raw('\xa5' * 100))
-
-        #
-        # A couple of sub-interfaces for tags
-        #
-        sub_if_on_pg2 = VppDot1QSubint(self, self.pg2, 92)
-        sub_if_on_pg3 = VppDot1QSubint(self, self.pg3, 93)
-        sub_if_on_pg2.admin_up()
-        sub_if_on_pg3.admin_up()
-
-        #
-        # Put all the interfaces into a new bridge domain
-        #
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg0.sw_if_index, bd_id=1)
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg1.sw_if_index, bd_id=1)
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1)
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1)
-        self.vapi.l2_interface_vlan_tag_rewrite(
-            sw_if_index=sub_if_on_pg2.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1,
-            push_dot1q=92)
-        self.vapi.l2_interface_vlan_tag_rewrite(
-            sw_if_index=sub_if_on_pg3.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1,
-            push_dot1q=93)
-
-        #
-        # Disable UU flooding, learning and ARP termination. makes this test
-        # easier as unicast packets are dropped if not extracted.
-        #
-        self.vapi.bridge_flags(bd_id=1, is_set=0,
-                               flags=(1 << 0) | (1 << 3) | (1 << 4))
-
-        #
-        # Add a DVR route to steer traffic at L3
-        #
-        route_1 = VppIpRoute(self, "1.1.1.1", 32,
-                             [VppRoutePath("0.0.0.0",
-                                           self.pg1.sw_if_index,
-                                           is_dvr=1)])
-        route_2 = VppIpRoute(self, "1.1.1.2", 32,
-                             [VppRoutePath("0.0.0.0",
-                                           sub_if_on_pg2.sw_if_index,
-                                           is_dvr=1)])
-        route_1.add_vpp_config()
-        route_2.add_vpp_config()
-
-        #
-        # packets are dropped because bridge does not flood unknown unicast
-        #
-        self.send_and_assert_no_replies(self.pg0, pkt_no_tag)
-
-        #
-        # Enable L3 extraction on pgs
-        #
-        self.vapi.l2_emulation(self.pg0.sw_if_index)
-        self.vapi.l2_emulation(self.pg1.sw_if_index)
-        self.vapi.l2_emulation(sub_if_on_pg2.sw_if_index)
-        self.vapi.l2_emulation(sub_if_on_pg3.sw_if_index)
-
-        #
-        # now we expect the packet forward according to the DVR route
-        #
-        rx = self.send_and_expect(self.pg0, pkt_no_tag * NUM_PKTS, self.pg1)
-        self.assert_same_mac_addr(pkt_no_tag, rx)
-        self.assert_has_no_tag(rx)
-
-        rx = self.send_and_expect(self.pg0, pkt_to_tag * NUM_PKTS, self.pg2)
-        self.assert_same_mac_addr(pkt_to_tag, rx)
-        self.assert_has_vlan_tag(92, rx)
-
-        rx = self.send_and_expect(self.pg3, pkt_from_tag * NUM_PKTS, self.pg1)
-        self.assert_same_mac_addr(pkt_from_tag, rx)
-        self.assert_has_no_tag(rx)
-
-        rx = self.send_and_expect(self.pg3,
-                                  pkt_from_to_tag * NUM_PKTS,
-                                  self.pg2)
-        self.assert_same_mac_addr(pkt_from_tag, rx)
-        self.assert_has_vlan_tag(92, rx)
-
-        #
-        # but broadcast packets are still flooded
-        #
-        self.send_and_expect(self.pg0, pkt_bcast * 33, self.pg2)
-
-        #
-        # cleanup
-        #
-        self.vapi.l2_emulation(self.pg0.sw_if_index,
-                               enable=0)
-        self.vapi.l2_emulation(self.pg1.sw_if_index,
-                               enable=0)
-        self.vapi.l2_emulation(sub_if_on_pg2.sw_if_index,
-                               enable=0)
-        self.vapi.l2_emulation(sub_if_on_pg3.sw_if_index,
-                               enable=0)
-
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg0.sw_if_index, bd_id=1, enable=0)
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0)
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1, enable=0)
-        self.vapi.sw_interface_set_l2_bridge(
-            rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1, enable=0)
-
-        route_1.remove_vpp_config()
-        route_2.remove_vpp_config()
-        sub_if_on_pg3.remove_vpp_config()
-        sub_if_on_pg2.remove_vpp_config()
-
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     unittest.main(testRunner=VppTestRunner)