ip: allow addrs from the same prefix on intf

[vpp.git] / test / test_flowprobe.py

diff --git a/test/test_flowprobe.py b/test/test_flowprobe.py
index bb50627..9ffe84b 100644 (file)
--- a/test/test_flowprobe.py
+++ b/test/test_flowprobe.py
@@ -40,9 +40,11 @@ class VppCFLOW(VppObject):
 
     def add_vpp_config(self):
         self.enable_exporter()
-        self._test.vapi.ppcli("flowprobe params record %s active %s "
-                              "passive %s" % (self._collect, self._active,
-                                              self._passive))
+        self._test.vapi.flowprobe_params(
+            record_l2=1 if 'l2' in self._collect.lower() else 0,
+            record_l3=1 if 'l3' in self._collect.lower() else 0,
+            record_l4=1 if 'l4' in self._collect.lower() else 0,
+            active_timer=self._active, passive_timer=self._passive)
         self.enable_flowprobe_feature()
         self._test.vapi.cli("ipfix flush")
         self._configured = True
@@ -72,7 +74,7 @@ class VppCFLOW(VppObject):
                             (self._intf, self._datapath))
 
     def object_id(self):
-        return "ipfix-collector-%s" % (self._src, self.dst)
+        return "ipfix-collector-%s-%s" % (self._src, self.dst)
 
     def query_vpp_config(self):
         return self._configured
@@ -125,8 +127,10 @@ class MethodHolder(VppTestCase):
             # Create BD with MAC learning and unknown unicast flooding disabled
             # and put interfaces to this BD
             cls.vapi.bridge_domain_add_del(bd_id=1, uu_flood=1, learn=1)
-            cls.vapi.sw_interface_set_l2_bridge(cls.pg1._sw_if_index, bd_id=1)
-            cls.vapi.sw_interface_set_l2_bridge(cls.pg2._sw_if_index, bd_id=1)
+            cls.vapi.sw_interface_set_l2_bridge(
+                rx_sw_if_index=cls.pg1._sw_if_index, bd_id=1)
+            cls.vapi.sw_interface_set_l2_bridge(
+                rx_sw_if_index=cls.pg2._sw_if_index, bd_id=1)
 
             # Set up all interfaces
             for i in cls.pg_interfaces:
@@ -158,6 +162,10 @@ class MethodHolder(VppTestCase):
             super(MethodHolder, cls).tearDownClass()
             raise
 
+    @classmethod
+    def tearDownClass(cls):
+        super(MethodHolder, cls).tearDownClass()
+
     def create_stream(self, src_if=None, dst_if=None, packets=None,
                       size=None, ip_ver='v4'):
         """Create a packet stream to tickle the plugin
@@ -226,7 +234,7 @@ class MethodHolder(VppTestCase):
                 ip_layer = capture[0][IPv6]
             if data_set is not None:
                 for record in data:
-                    # skip flow if in/out gress interface is 0
+                    # skip flow if ingress/egress interface is 0
                     if int(binascii.hexlify(record[10]), 16) == 0:
                         continue
                     if int(binascii.hexlify(record[14]), 16) == 0:
@@ -325,6 +333,14 @@ class MethodHolder(VppTestCase):
 class Flowprobe(MethodHolder):
     """Template verification, timer tests"""
 
+    @classmethod
+    def setUpClass(cls):
+        super(Flowprobe, cls).setUpClass()
+
+    @classmethod
+    def tearDownClass(cls):
+        super(Flowprobe, cls).tearDownClass()
+
     def test_0001(self):
         """ timer less than template timeout"""
         self.logger.info("FFP_TEST_START_0001")
@@ -461,6 +477,14 @@ class Flowprobe(MethodHolder):
 class Datapath(MethodHolder):
     """collect information on Ethernet, IP4 and IP6 datapath (no timers)"""
 
+    @classmethod
+    def setUpClass(cls):
+        super(Datapath, cls).setUpClass()
+
+    @classmethod
+    def tearDownClass(cls):
+        super(Datapath, cls).tearDownClass()
+
     def test_templatesL2(self):
         """ verify template on L2 datapath"""
         self.logger.info("FFP_TEST_START_0000")
@@ -470,7 +494,7 @@ class Datapath(MethodHolder):
         ipfix.add_vpp_config()
 
         # template packet should arrive immediately
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         ipfix.verify_templates(timeout=3, count=1)
         self.collector.get_capture(1)
 
@@ -494,7 +518,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 256: 8})
@@ -520,7 +544,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 4: 17,
@@ -548,7 +572,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 7: 'sport', 11: 'dport'})
@@ -568,7 +592,7 @@ class Datapath(MethodHolder):
         ipfix.add_vpp_config()
 
         # template packet should arrive immediately
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         ipfix.verify_templates(timeout=3, count=1)
         self.collector.get_capture(1)
 
@@ -593,7 +617,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4)
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 256: 8})
@@ -621,7 +645,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4)
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {1: 'octets', 2: 'packets',
@@ -650,7 +674,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4)
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 7: 'sport', 11: 'dport'})
@@ -695,7 +719,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6)
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 256: 56710},
@@ -725,7 +749,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6)
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets',
@@ -756,7 +780,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6)
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[0])
         self.verify_cflow_data_detail(ipfix_decoder, capture, cflow,
                                       {2: 'packets', 7: 'sport', 11: 'dport'},
@@ -785,7 +809,7 @@ class Datapath(MethodHolder):
         capture = self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflow = self.wait_for_cflow_packet(self.collector, templates[1])
         self.verify_cflow_data_notimer(ipfix_decoder, capture, [cflow])
         self.collector.get_capture(4)
@@ -804,7 +828,7 @@ class Datapath(MethodHolder):
 
         ipfix_decoder = IPFIXDecoder()
         # template packet should arrive immediately
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         templates = ipfix.verify_templates(ipfix_decoder)
 
         self.create_stream(packets=6)
@@ -812,7 +836,7 @@ class Datapath(MethodHolder):
 
         # make sure the one packet we expect actually showed up
         cflows = []
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         cflows.append(self.wait_for_cflow_packet(self.collector,
                                                  templates[1]))
         cflows.append(self.wait_for_cflow_packet(self.collector,
@@ -828,6 +852,14 @@ class Datapath(MethodHolder):
 class DisableIPFIX(MethodHolder):
     """Disable IPFIX"""
 
+    @classmethod
+    def setUpClass(cls):
+        super(DisableIPFIX, cls).setUpClass()
+
+    @classmethod
+    def tearDownClass(cls):
+        super(DisableIPFIX, cls).tearDownClass()
+
     def test_0001(self):
         """ disable IPFIX after first packets"""
         self.logger.info("FFP_TEST_START_0001")
@@ -845,18 +877,18 @@ class DisableIPFIX(MethodHolder):
         self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1])
         self.collector.get_capture(4)
 
-        # disble IPFIX
+        # disable IPFIX
         ipfix.disable_exporter()
         self.pg_enable_capture([self.collector])
 
         self.send_packets()
 
         # make sure no one packet arrived in 1 minute
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1],
                                    expected=False)
         self.collector.get_capture(0)
@@ -869,6 +901,14 @@ class DisableIPFIX(MethodHolder):
 class ReenableIPFIX(MethodHolder):
     """Re-enable IPFIX"""
 
+    @classmethod
+    def setUpClass(cls):
+        super(ReenableIPFIX, cls).setUpClass()
+
+    @classmethod
+    def tearDownClass(cls):
+        super(ReenableIPFIX, cls).tearDownClass()
+
     def test_0011(self):
         """ disable IPFIX after first packets and re-enable after few packets
         """
@@ -887,19 +927,19 @@ class ReenableIPFIX(MethodHolder):
         self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1])
         self.collector.get_capture(4)
 
-        # disble IPFIX
+        # disable IPFIX
         ipfix.disable_exporter()
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.pg_enable_capture([self.collector])
 
         self.send_packets()
 
         # make sure no one packet arrived in active timer span
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1],
                                    expected=False)
         self.collector.get_capture(0)
@@ -930,6 +970,14 @@ class ReenableIPFIX(MethodHolder):
 class DisableFP(MethodHolder):
     """Disable Flowprobe feature"""
 
+    @classmethod
+    def setUpClass(cls):
+        super(DisableFP, cls).setUpClass()
+
+    @classmethod
+    def tearDownClass(cls):
+        super(DisableFP, cls).tearDownClass()
+
     def test_0001(self):
         """ disable flowprobe feature after first packets"""
         self.logger.info("FFP_TEST_START_0001")
@@ -946,18 +994,18 @@ class DisableFP(MethodHolder):
         self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1])
         self.collector.get_capture(4)
 
-        # disble IPFIX
+        # disable IPFIX
         ipfix.disable_flowprobe_feature()
         self.pg_enable_capture([self.collector])
 
         self.send_packets()
 
         # make sure no one packet arrived in active timer span
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1],
                                    expected=False)
         self.collector.get_capture(0)
@@ -970,6 +1018,14 @@ class DisableFP(MethodHolder):
 class ReenableFP(MethodHolder):
     """Re-enable Flowprobe feature"""
 
+    @classmethod
+    def setUpClass(cls):
+        super(ReenableFP, cls).setUpClass()
+
+    @classmethod
+    def tearDownClass(cls):
+        super(ReenableFP, cls).tearDownClass()
+
     def test_0001(self):
         """ disable flowprobe feature after first packets and re-enable
         after few packets """
@@ -982,39 +1038,39 @@ class ReenableFP(MethodHolder):
 
         ipfix_decoder = IPFIXDecoder()
         # template packet should arrive immediately
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         templates = ipfix.verify_templates(ipfix_decoder, timeout=3)
 
         self.create_stream()
         self.send_packets()
 
         # make sure the one packet we expect actually showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1], 5)
         self.collector.get_capture(4)
 
-        # disble FPP feature
+        # disable FPP feature
         ipfix.disable_flowprobe_feature()
         self.pg_enable_capture([self.collector])
 
         self.send_packets()
 
         # make sure no one packet arrived in active timer span
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1], 5,
                                    expected=False)
         self.collector.get_capture(0)
 
         # enable FPP feature
         ipfix.enable_flowprobe_feature()
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         templates = ipfix.verify_templates(ipfix_decoder, timeout=3)
 
         self.send_packets()
 
         # make sure the next packets (templates and data) we expect actually
         # showed up
-        self.vapi.cli("ipfix flush")
+        self.vapi.ipfix_flush()
         self.wait_for_cflow_packet(self.collector, templates[1], 5)
         self.collector.get_capture(4)