from framework import VppTestCase, VppTestRunner
from vpp_sub_interface import VppDot1QSubint
from vpp_ip import DpoProto
-from vpp_ip_route import VppIpRoute, VppRoutePath, VppMplsRoute, \
- VppMplsLabel, VppMplsTable, FibPathProto
+from vpp_ip_route import (
+ VppIpRoute,
+ VppRoutePath,
+ VppMplsRoute,
+ VppMplsLabel,
+ VppMplsTable,
+ FibPathProto,
+)
import scapy.compat
from scapy.packet import Raw
class TestQOS(VppTestCase):
- """ QOS Test Case """
+ """QOS Test Case"""
# Note: Since the enums aren't created dynamically until after
# the papi client attaches to VPP, we put it in a property to
super(TestQOS, self).tearDown()
def test_qos_ip(self):
- """ QoS Mark/Record/Store IP """
+ """QoS Mark/Record/Store IP"""
#
# for table 1 map the n=0xff possible values of input QoS mark,
output = [scapy.compat.chb(0)] * 256
for i in range(0, 255):
output[i] = scapy.compat.chb(255 - i)
- os = b''.join(output)
- rows = [{'outputs': os},
- {'outputs': os},
- {'outputs': os},
- {'outputs': os}]
+ os = b"".join(output)
+ rows = [{"outputs": os}, {"outputs": os}, {"outputs": os}, {"outputs": os}]
qem1 = VppQosEgressMap(self, 1, rows).add_vpp_config()
# For table 2 (and up) use the value n for everything
#
output = [scapy.compat.chb(2)] * 256
- os = b''.join(output)
- rows = [{'outputs': os},
- {'outputs': os},
- {'outputs': os},
- {'outputs': os}]
+ os = b"".join(output)
+ rows = [{"outputs": os}, {"outputs": os}, {"outputs": os}, {"outputs": os}]
qem2 = VppQosEgressMap(self, 2, rows).add_vpp_config()
output = [scapy.compat.chb(3)] * 256
- os = b''.join(output)
- rows = [{'outputs': os},
- {'outputs': os},
- {'outputs': os},
- {'outputs': os}]
+ os = b"".join(output)
+ rows = [{"outputs": os}, {"outputs": os}, {"outputs": os}, {"outputs": os}]
qem3 = VppQosEgressMap(self, 3, rows).add_vpp_config()
output = [scapy.compat.chb(4)] * 256
- os = b''.join(output)
- rows = [{'outputs': os},
- {'outputs': os},
- {'outputs': os},
- {'outputs': os}]
+ os = b"".join(output)
+ rows = [{"outputs": os}, {"outputs": os}, {"outputs": os}, {"outputs": os}]
qem4 = VppQosEgressMap(self, 4, rows).add_vpp_config()
qem5 = VppQosEgressMap(self, 5, rows).add_vpp_config()
#
# Bind interface pgN to table n
#
- qm1 = VppQosMark(self, self.pg1, qem1,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
- qm2 = VppQosMark(self, self.pg2, qem2,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
- qm3 = VppQosMark(self, self.pg3, qem3,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
- qm4 = VppQosMark(self, self.pg4, qem4,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
+ qm1 = VppQosMark(
+ self, self.pg1, qem1, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
+ qm2 = VppQosMark(
+ self, self.pg2, qem2, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
+ qm3 = VppQosMark(
+ self, self.pg3, qem3, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
+ qm4 = VppQosMark(
+ self, self.pg4, qem4, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
self.assertTrue(qm3.query_vpp_config())
self.logger.info(self.vapi.cli("sh qos mark"))
#
# packets ingress on Pg0
#
- p_v4 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- IP(src=self.pg0.remote_ip4, dst=self.pg1.remote_ip4, tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
- p_v6 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- IPv6(src=self.pg0.remote_ip6, dst=self.pg1.remote_ip6,
- tc=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
+ p_v4 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / IP(src=self.pg0.remote_ip4, dst=self.pg1.remote_ip4, tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
+ p_v6 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / IPv6(src=self.pg0.remote_ip6, dst=self.pg1.remote_ip6, tc=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
#
# Since we have not yet enabled the recording of the input QoS
#
# Enable QoS recording on IP input for pg0
#
- qr1 = VppQosRecord(self, self.pg0,
- self.QOS_SOURCE.QOS_API_SOURCE_IP)
+ qr1 = VppQosRecord(self, self.pg0, self.QOS_SOURCE.QOS_API_SOURCE_IP)
qr1.add_vpp_config()
self.logger.info(self.vapi.cli("sh qos record"))
#
# enable QoS stroe instead of record
#
- qst1 = VppQosStore(self, self.pg0,
- self.QOS_SOURCE.QOS_API_SOURCE_IP,
- 5).add_vpp_config()
+ qst1 = VppQosStore(
+ self, self.pg0, self.QOS_SOURCE.QOS_API_SOURCE_IP, 5
+ ).add_vpp_config()
self.logger.info(self.vapi.cli("sh qos store"))
p_v4[IP].dst = self.pg1.remote_ip4
self.assertEqual(p[IP].tos, 254)
def test_qos_mpls(self):
- """ QoS Mark/Record MPLS """
+ """QoS Mark/Record MPLS"""
#
# 255 QoS for all input values
from_mpls = 5
from_vlan = 4
output = [scapy.compat.chb(from_ext)] * 256
- os1 = b''.join(output)
+ os1 = b"".join(output)
output = [scapy.compat.chb(from_vlan)] * 256
- os2 = b''.join(output)
+ os2 = b"".join(output)
output = [scapy.compat.chb(from_mpls)] * 256
- os3 = b''.join(output)
+ os3 = b"".join(output)
output = [scapy.compat.chb(from_ip)] * 256
- os4 = b''.join(output)
- rows = [{'outputs': os1},
- {'outputs': os2},
- {'outputs': os3},
- {'outputs': os4}]
+ os4 = b"".join(output)
+ rows = [{"outputs": os1}, {"outputs": os2}, {"outputs": os3}, {"outputs": os4}]
qem1 = VppQosEgressMap(self, 1, rows).add_vpp_config()
#
# a route with 1 MPLS label
#
- route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
- [VppRoutePath(self.pg1.remote_ip4,
- self.pg1.sw_if_index,
- labels=[32])])
+ route_10_0_0_1 = VppIpRoute(
+ self,
+ "10.0.0.1",
+ 32,
+ [VppRoutePath(self.pg1.remote_ip4, self.pg1.sw_if_index, labels=[32])],
+ )
route_10_0_0_1.add_vpp_config()
#
# a route with 3 MPLS labels
#
- route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32,
- [VppRoutePath(self.pg1.remote_ip4,
- self.pg1.sw_if_index,
- labels=[63, 33, 34])])
+ route_10_0_0_3 = VppIpRoute(
+ self,
+ "10.0.0.3",
+ 32,
+ [
+ VppRoutePath(
+ self.pg1.remote_ip4, self.pg1.sw_if_index, labels=[63, 33, 34]
+ )
+ ],
+ )
route_10_0_0_3.add_vpp_config()
#
# enable IP QoS recording on the input Pg0 and MPLS egress marking
# on Pg1
#
- qr1 = VppQosRecord(self, self.pg0,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
- qm1 = VppQosMark(self, self.pg1, qem1,
- self.QOS_SOURCE.QOS_API_SOURCE_MPLS).add_vpp_config()
+ qr1 = VppQosRecord(
+ self, self.pg0, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
+ qm1 = VppQosMark(
+ self, self.pg1, qem1, self.QOS_SOURCE.QOS_API_SOURCE_MPLS
+ ).add_vpp_config()
#
# packet that will get one label added and 3 labels added resp.
#
- p_1 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- IP(src=self.pg0.remote_ip4, dst="10.0.0.1", tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
- p_3 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- IP(src=self.pg0.remote_ip4, dst="10.0.0.3", tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
+ p_1 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / IP(src=self.pg0.remote_ip4, dst="10.0.0.1", tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
+ p_3 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / IP(src=self.pg0.remote_ip4, dst="10.0.0.3", tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
rx = self.send_and_expect(self.pg0, p_1 * NUM_PKTS, self.pg1)
# on Pg1
#
qr2 = VppQosRecord(
- self, self.pg0,
- self.QOS_SOURCE.QOS_API_SOURCE_MPLS).add_vpp_config()
+ self, self.pg0, self.QOS_SOURCE.QOS_API_SOURCE_MPLS
+ ).add_vpp_config()
qm2 = VppQosMark(
- self, self.pg1, qem1,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
+ self, self.pg1, qem1, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
#
# MPLS x-connect - COS according to pg1 map
#
- route_32_eos = VppMplsRoute(self, 32, 1,
- [VppRoutePath(self.pg1.remote_ip4,
- self.pg1.sw_if_index,
- labels=[VppMplsLabel(33)])])
+ route_32_eos = VppMplsRoute(
+ self,
+ 32,
+ 1,
+ [
+ VppRoutePath(
+ self.pg1.remote_ip4, self.pg1.sw_if_index, labels=[VppMplsLabel(33)]
+ )
+ ],
+ )
route_32_eos.add_vpp_config()
- p_m1 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- MPLS(label=32, cos=3, ttl=2) /
- IP(src=self.pg0.remote_ip4, dst="10.0.0.1", tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
+ p_m1 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / MPLS(label=32, cos=3, ttl=2)
+ / IP(src=self.pg0.remote_ip4, dst="10.0.0.1", tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
rx = self.send_and_expect(self.pg0, p_m1 * NUM_PKTS, self.pg1)
for p in rx:
#
# MPLS deag - COS is copied from MPLS to IP
#
- route_33_eos = VppMplsRoute(self, 33, 1,
- [VppRoutePath("0.0.0.0",
- 0xffffffff,
- nh_table_id=0)])
+ route_33_eos = VppMplsRoute(
+ self, 33, 1, [VppRoutePath("0.0.0.0", 0xFFFFFFFF, nh_table_id=0)]
+ )
route_33_eos.add_vpp_config()
- route_10_0_0_4 = VppIpRoute(self, "10.0.0.4", 32,
- [VppRoutePath(self.pg1.remote_ip4,
- self.pg1.sw_if_index)])
+ route_10_0_0_4 = VppIpRoute(
+ self,
+ "10.0.0.4",
+ 32,
+ [VppRoutePath(self.pg1.remote_ip4, self.pg1.sw_if_index)],
+ )
route_10_0_0_4.add_vpp_config()
- p_m2 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- MPLS(label=33, ttl=2, cos=3) /
- IP(src=self.pg0.remote_ip4, dst="10.0.0.4", tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
+ p_m2 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / MPLS(label=33, ttl=2, cos=3)
+ / IP(src=self.pg0.remote_ip4, dst="10.0.0.4", tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
rx = self.send_and_expect(self.pg0, p_m2 * NUM_PKTS, self.pg1)
self.assertEqual(p[IP].tos, from_mpls)
def test_qos_vlan(self):
- """QoS mark/record VLAN """
+ """QoS mark/record VLAN"""
#
# QoS for all input values
output = [scapy.compat.chb(0)] * 256
for i in range(0, 255):
output[i] = scapy.compat.chb(255 - i)
- os = b''.join(output)
- rows = [{'outputs': os},
- {'outputs': os},
- {'outputs': os},
- {'outputs': os}]
+ os = b"".join(output)
+ rows = [{"outputs": os}, {"outputs": os}, {"outputs": os}, {"outputs": os}]
qem1 = VppQosEgressMap(self, 1, rows).add_vpp_config()
# enable VLAN QoS recording/marking on the input Pg0 subinterface and
#
qr_v = VppQosRecord(
- self, sub_if,
- self.QOS_SOURCE.QOS_API_SOURCE_VLAN).add_vpp_config()
+ self, sub_if, self.QOS_SOURCE.QOS_API_SOURCE_VLAN
+ ).add_vpp_config()
qm_v = VppQosMark(
- self, sub_if, qem1,
- self.QOS_SOURCE.QOS_API_SOURCE_VLAN).add_vpp_config()
+ self, sub_if, qem1, self.QOS_SOURCE.QOS_API_SOURCE_VLAN
+ ).add_vpp_config()
#
# IP marking/recording on pg1
#
qr_ip = VppQosRecord(
- self, self.pg1,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
+ self, self.pg1, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
qm_ip = VppQosMark(
- self, self.pg1, qem1,
- self.QOS_SOURCE.QOS_API_SOURCE_IP).add_vpp_config()
+ self, self.pg1, qem1, self.QOS_SOURCE.QOS_API_SOURCE_IP
+ ).add_vpp_config()
#
# a routes to/from sub-interface
#
- route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
- [VppRoutePath(sub_if.remote_ip4,
- sub_if.sw_if_index)])
+ route_10_0_0_1 = VppIpRoute(
+ self, "10.0.0.1", 32, [VppRoutePath(sub_if.remote_ip4, sub_if.sw_if_index)]
+ )
route_10_0_0_1.add_vpp_config()
- route_10_0_0_2 = VppIpRoute(self, "10.0.0.2", 32,
- [VppRoutePath(self.pg1.remote_ip4,
- self.pg1.sw_if_index)])
+ route_10_0_0_2 = VppIpRoute(
+ self,
+ "10.0.0.2",
+ 32,
+ [VppRoutePath(self.pg1.remote_ip4, self.pg1.sw_if_index)],
+ )
route_10_0_0_2.add_vpp_config()
- route_2001_1 = VppIpRoute(self, "2001::1", 128,
- [VppRoutePath(sub_if.remote_ip6,
- sub_if.sw_if_index)])
+ route_2001_1 = VppIpRoute(
+ self, "2001::1", 128, [VppRoutePath(sub_if.remote_ip6, sub_if.sw_if_index)]
+ )
route_2001_1.add_vpp_config()
- route_2001_2 = VppIpRoute(self, "2001::2", 128,
- [VppRoutePath(self.pg1.remote_ip6,
- self.pg1.sw_if_index)])
+ route_2001_2 = VppIpRoute(
+ self,
+ "2001::2",
+ 128,
+ [VppRoutePath(self.pg1.remote_ip6, self.pg1.sw_if_index)],
+ )
route_2001_2.add_vpp_config()
- p_v1 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- Dot1Q(vlan=11, prio=1) /
- IP(src="1.1.1.1", dst="10.0.0.2", tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
-
- p_v2 = (Ether(src=self.pg1.remote_mac, dst=self.pg1.local_mac) /
- IP(src="1.1.1.1", dst="10.0.0.1", tos=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
-
- p_v3 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- Dot1Q(vlan=11, prio=1, id=1) /
- IP(src="1.1.1.1", dst="10.0.0.2", tos=2) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
+ p_v1 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / Dot1Q(vlan=11, prio=1)
+ / IP(src="1.1.1.1", dst="10.0.0.2", tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
+
+ p_v2 = (
+ Ether(src=self.pg1.remote_mac, dst=self.pg1.local_mac)
+ / IP(src="1.1.1.1", dst="10.0.0.1", tos=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
+
+ p_v3 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / Dot1Q(vlan=11, prio=1, id=1)
+ / IP(src="1.1.1.1", dst="10.0.0.2", tos=2)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
rx = self.send_and_expect(self.pg1, p_v2 * NUM_PKTS, self.pg0)
for p in rx:
self.assertEqual(p[IP].tos, 253)
- p_v1 = (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
- Dot1Q(vlan=11, prio=2) /
- IPv6(src="2001::1", dst="2001::2", tc=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
-
- p_v2 = (Ether(src=self.pg1.remote_mac, dst=self.pg1.local_mac) /
- IPv6(src="3001::1", dst="2001::1", tc=1) /
- UDP(sport=1234, dport=1234) /
- Raw(scapy.compat.chb(100) * NUM_PKTS))
+ p_v1 = (
+ Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
+ / Dot1Q(vlan=11, prio=2)
+ / IPv6(src="2001::1", dst="2001::2", tc=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
+
+ p_v2 = (
+ Ether(src=self.pg1.remote_mac, dst=self.pg1.local_mac)
+ / IPv6(src="3001::1", dst="2001::1", tc=1)
+ / UDP(sport=1234, dport=1234)
+ / Raw(scapy.compat.chb(100) * NUM_PKTS)
+ )
rx = self.send_and_expect(self.pg1, p_v2 * NUM_PKTS, self.pg0)
sub_if.unconfig_ip6()
-if __name__ == '__main__':
+if __name__ == "__main__":
unittest.main(testRunner=VppTestRunner)
Code Review / vpp.git / blobdiff