| Library | resources.libraries.python.Classify.Classify
| Library | resources.libraries.python.Trace
| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
| Documentation | *IPv4 routing with ingress ACL test cases*
| ...
| ... | Encapsulations: Eth-IPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv4
| | [Documentation]
| | ... | On DUT1 add source IPv4 address to classify table with 'deny'.\
| | ... | Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send Packet And Check Headers | ${tg_node}
+| | Then Send packet and verify headers | ${tg_node}
| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers | ${tg_node}
+| | And Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | ... | ${ip_version} | src | ${test_src_ip}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send packet from Port to Port should failed | ${tg_node}
+| | Then Packet transmission from port to port should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers | ${tg_node}
+| | And Send packet and verify headers | ${tg_node}
| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | [Documentation]
| | ... | On DUT1 add destination IPv4 address to classify table with 'deny'.\
| | ... | Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send Packet And Check Headers | ${tg_node}
+| | Then Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers | ${tg_node}
+| | And Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | ... | ${ip_version} | dst | ${test_dst_ip}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send packet from Port to Port should failed | ${tg_node}
+| | Then Packet transmission from port to port should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers | ${tg_node}
+| | And Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | [Documentation]
| | ... | On DUT1 add source and destination IPv4 addresses to classify table\
| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send Packet And Check Headers | ${tg_node}
+| | Then Send packet and verify headers | ${tg_node}
| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers | ${tg_node}
+| | And Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Send packet from Port to Port should failed | ${tg_node}
+| | Then Packet transmission from port to port should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers | ${tg_node}
+| | And Send packet and verify headers | ${tg_node}
| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | [Documentation]
| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | 000000000000000000000000000000000000000000000006
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
| | [Documentation]
| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | 000000000000000000000000000000000000000000000011
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | [Documentation]
| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
| | ... | Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | source
| | ... | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
| | [Documentation]
| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
| | ... | Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | destination
| | ... | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
| | [Documentation]
| | ... | On DUT1 add TCP source and destination ports to classify table\
| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP
| | ... | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
| | [Documentation]
| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
| | ... | Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | source
| | ... | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
| | [Documentation]
| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
| | ... | Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | destination
| | ... | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
| | [Documentation]
| | ... | On DUT1 add UDP source and destination ports to classify table\
| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
+| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
+| | And Set interfaces in 3-node circular topology up
| | And Set Interface Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And Set Interface Address | ${dut1_node}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
-| | And L2 setup xconnect on DUT
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
| | ... | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet should failed | ${tg_node}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25