*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY
| ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
| ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
| ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance ndrchk test teardown
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance ndrchk test
| ...
| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
| ...
| ... | IP protocol=61 and generated payload.
| ... | *[Ref] Applicable standard specifications:* RFC2544.
+*** Variables ***
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+
*** Test Cases ***
| tc01-64B-1t1c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial throughput\
| | ... | test at 2x 1.9mpps.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 64
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${64}
| | ${rate}= | Set Variable | 1.9mpps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc02-1480B-1t1c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Verify ref-NDR for 1480 Byte frames using single trial\
| | ... | throughput test at 2x 740000pps.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 1480
+| | [Tags] | 1480B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${1480}
| | ${rate}= | Set Variable | 740000pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc03-9000B-1t1c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial\
| | ... | throughput test at 2x 120000pps.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 9000
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 120000pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc04-64B-2t2c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial\
| | ... | throughput test at 2x 3.6mpps.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 64
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${64}
| | ${rate}= | Set Variable | 3.6mpps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc05-1480B-2t2c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Verify ref-NDR for 1480 Byte frames using single trial\
| | ... | throughput test at 2x 740000pps.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 1480
+| | [Tags] | 1480B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${1480}
| | ${rate}= | Set Variable | 740000pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc06-9000B-2t2c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial\
| | ... | throughput test at 2x 120000pps.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 120000pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc07-64B-4t4c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial\
| | ... | throughput test at 2x 3.5mpps.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 64
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${64}
| | ${rate}= | Set Variable | 3.5mpps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc08-1480B-4t4c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Verify ref-NDR for 1480 Byte frames using single trial\
| | ... | throughput test at 2x 740000pps.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 1480
+| | [Tags] | 1480B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${1480}
| | ${rate}= | Set Variable | 740000pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
| tc09-9000B-4t4c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial\
| | ... | throughput test at 2x 120000pps.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 120000pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
-
+| | ... | ${framesize} | ${traffic_profile}