| Resource | resources/libraries/robot/performance.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE | IP6BASE
| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| ... | interfaces.
| ... | *[Ref] Applicable standard specifications:* RFC2544.
+*** Variables ***
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
+
*** Test Cases ***
| tc01-78B-1t1c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 2.9mpps.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 78
-| | ${rate}= | Set Variable | 2.9mpps
+| | ... | frames using single trial throughput test at 2x 3.9mpps.
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${78}
+| | ${rate}= | Set Variable | 3.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc02-1518B-1t1c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 1518
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${1518}
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc03-9000B-1t1c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 9000
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc04-78B-2t2c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 5.9mpps.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 78
-| | ${rate}= | Set Variable | 5.9mpps
+| | ... | frames using single trial throughput test at 2x 8.1mpps.
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${78}
+| | ${rate}= | Set Variable | 8.1mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc05-1518B-2t2c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 1518
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${1518}
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc06-9000B-2t2c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc07-78B-4t4c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 7.3mpps.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 78
-| | ${rate}= | Set Variable | 7.3mpps
+| | ... | frames using single trial throughput test at 2x 9.4mpps.
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${78}
+| | ${rate}= | Set Variable | 9.4mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc08-1518B-4t4c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 1518
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${1518}
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
| tc09-9000B-4t4c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
| | And Add PCI devices to DUTs from 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}